23 #include <ns3/object-factory.h> 28 #include <ns3/simulator.h> 29 #include <ns3/double.h> 40 #include <ns3/lte-common.h> 41 #include <ns3/pointer.h> 42 #include <ns3/boolean.h> 43 #include <ns3/lte-ue-power-control.h> 153 m_state (CELL_SEARCH),
155 m_rsReceivedPowerUpdated (false),
156 m_rsInterferencePowerUpdated (false),
157 m_dataInterferencePowerUpdated (false),
158 m_pssReceived (false),
161 m_rsrpSinrSampleCounter (0)
163 m_amc = CreateObject <LteAmc> ();
170 "Cannot create UE devices after simulation started");
200 .AddAttribute (
"TxPower",
201 "Transmission power in dBm",
205 MakeDoubleChecker<double> ())
206 .AddAttribute (
"NoiseFigure",
207 "Loss (dB) in the Signal-to-Noise-Ratio due to non-idealities in the receiver." 208 " According to Wikipedia (http://en.wikipedia.org/wiki/Noise_figure), this is " 209 "\"the difference in decibels (dB) between" 210 " the noise output of the actual receiver to the noise output of an " 211 " ideal receiver with the same overall gain and bandwidth when the receivers " 212 " are connected to sources at the standard noise temperature T0.\" " 213 "In this model, we consider T0 = 290K.",
217 MakeDoubleChecker<double> ())
218 .AddAttribute (
"TxMode1Gain",
219 "Transmission mode 1 gain in dB",
222 MakeDoubleChecker<double> ())
223 .AddAttribute (
"TxMode2Gain",
224 "Transmission mode 2 gain in dB",
227 MakeDoubleChecker<double> ())
228 .AddAttribute (
"TxMode3Gain",
229 "Transmission mode 3 gain in dB",
232 MakeDoubleChecker<double> ())
233 .AddAttribute (
"TxMode4Gain",
234 "Transmission mode 4 gain in dB",
237 MakeDoubleChecker<double> ())
238 .AddAttribute (
"TxMode5Gain",
239 "Transmission mode 5 gain in dB",
242 MakeDoubleChecker<double> ())
243 .AddAttribute (
"TxMode6Gain",
244 "Transmission mode 6 gain in dB",
247 MakeDoubleChecker<double> ())
248 .AddAttribute (
"TxMode7Gain",
249 "Transmission mode 7 gain in dB",
252 MakeDoubleChecker<double> ())
253 .AddTraceSource (
"ReportCurrentCellRsrpSinr",
254 "RSRP and SINR statistics.",
256 "ns3::LteUePhy::RsrpSinrTracedCallback")
257 .AddAttribute (
"RsrpSinrSamplePeriod",
258 "The sampling period for reporting RSRP-SINR stats (default value 1)",
261 MakeUintegerChecker<uint16_t> ())
262 .AddTraceSource (
"UlPhyTransmission",
263 "DL transmission PHY layer statistics.",
265 "ns3::PhyTransmissionStatParameters::TracedCallback")
266 .AddAttribute (
"DlSpectrumPhy",
267 "The downlink LteSpectrumPhy associated to this LtePhy",
271 MakePointerChecker <LteSpectrumPhy> ())
272 .AddAttribute (
"UlSpectrumPhy",
273 "The uplink LteSpectrumPhy associated to this LtePhy",
277 MakePointerChecker <LteSpectrumPhy> ())
278 .AddAttribute (
"RsrqUeMeasThreshold",
279 "Receive threshold for PSS on RSRQ [dB]",
282 MakeDoubleChecker<double> ())
283 .AddAttribute (
"UeMeasurementsFilterPeriod",
284 "Time period for reporting UE measurements, i.e., the" 285 "length of layer-1 filtering.",
289 .AddTraceSource (
"ReportUeMeasurements",
290 "Report UE measurements RSRP (dBm) and RSRQ (dB).",
292 "ns3::LteUePhy::RsrpRsrqTracedCallback")
293 .AddTraceSource (
"StateTransition",
294 "Trace fired upon every UE PHY state transition",
296 "ns3::LteUePhy::StateTracedCallback")
297 .AddAttribute (
"EnableUplinkPowerControl",
298 "If true, Uplink Power Control will be enabled.",
310 bool haveNodeId =
false;
317 nodeId = node->
GetId ();
526 Values::const_iterator it;
532 double powerTxW = ((*it) * 180000.0) / 12.0;
536 double rsrp = (rbNum > 0) ? (sum / rbNum) : DBL_MAX;
545 double avSinr = (rbNum > 0) ? (sum / rbNum) : DBL_MAX;
557 std::list <PssElement>::iterator itPss =
m_pssList.begin ();
561 double rssiSum = 0.0;
571 double interfPlusNoisePowerTxW = ((*itIntN) * 180000.0) / 12.0;
572 double signalPowerTxW = ((*itPj) * 180000.0) / 12.0;
573 rssiSum += (2 * (interfPlusNoisePowerTxW + signalPowerTxW));
577 double rsrq_dB = 10 * log10 ((*itPss).pssPsdSum / rssiSum);
582 <<
" has RSRQ " << rsrq_dB <<
" and RBnum " << rbNum);
584 std::map <uint16_t, UeMeasurementsElement>::iterator itMeasMap;
588 (*itMeasMap).second.rsrqSum += rsrq_dB;
589 (*itMeasMap).second.rsrqNum++;
593 NS_LOG_WARN (
"race condition of bug 2091 occurred");
628 NS_LOG_LOGIC (
"data interf measurement available, SINR = " << mixedSinr);
634 mixedSinr /= (*m_noisePsd);
635 NS_LOG_LOGIC (
"no data interf measurement available, SINR = " << mixedSinr);
645 double avgMixedSinr = 0;
646 uint32_t usedRbgNum = 0;
650 avgMixedSinr+=mixedSinr[i];
652 avgMixedSinr = avgMixedSinr/usedRbgNum;
653 for(uint32_t i = 0; i < modulo; i++)
689 Values::const_iterator it;
692 double powerTxW = ((*it) * 180000);
696 double rsrp = 10 * log10 (sum) + 30;
717 std::vector<int> cqi;
723 int nbSubChannels = cqi.size ();
725 int activeSubChannels = 0;
727 for (
int i = 0; i < nbSubChannels; i++)
729 if (cqi.at (i) != -1)
731 cqiSum += cqi.at (i);
734 NS_LOG_DEBUG (
this <<
" subch " << i <<
" cqi " << cqi.at (i));
741 for (
int i = 0; i < nLayer; i++)
743 if (activeSubChannels > 0)
745 dlcqi.m_wbCqi.push_back ((uint16_t) cqiSum / activeSubChannels);
750 dlcqi.m_wbCqi.push_back (1);
761 int nbSubChannels = cqi.size ();
767 for (
int i = 0; i < nbSubChannels; i++)
769 if (cqi.at (i) != -1)
771 cqiSum += cqi.at (i);
775 if (cqiNum == rbgSize)
781 for (
int i = 0; i < nLayer; i++)
783 hlCqi.
m_sbCqi.push_back ((uint16_t) cqiSum / rbgSize);
795 dlcqi.m_sbMeasResult = rbgMeas;
798 msg->SetDlCqi (dlcqi);
811 std::map <uint16_t, UeMeasurementsElement>::iterator it;
814 double avg_rsrp = (*it).second.rsrpSum / (double)(*it).second.rsrpNum;
815 double avg_rsrq = (*it).second.rsrqSum / (
double)(*it).second.rsrqNum;
822 <<
" RSRP " << avg_rsrp
823 <<
" (nSamples " << (uint16_t)(*it).second.rsrpNum <<
")" 824 <<
" RSRQ " << avg_rsrq
825 <<
" (nSamples " << (uint16_t)(*it).second.rsrqNum <<
")" 861 msg->SetRapId (raPreambleId);
873 std::list<Ptr<LteControlMessage> >::iterator it;
874 NS_LOG_DEBUG (
this <<
" I am rnti = " <<
m_rnti <<
" and I received msgs " << (uint16_t) msgList.size ());
875 for (it = msgList.begin (); it != msgList.end (); it++)
890 if (dci.m_resAlloc != 0)
895 std::vector <int> dlRb;
899 for (
int i = 0; i < 32; i++)
901 if (((dci.m_rbBitmap & mask) >> i) == 1)
918 NS_LOG_DEBUG (
this <<
" UE " <<
m_rnti <<
" DL-DCI " << dci.m_rnti <<
" bitmap " << dci.m_rbBitmap);
919 for (uint8_t i = 0; i < dci.m_tbsSize.size (); i++)
921 m_downlinkSpectrumPhy->AddExpectedTb (dci.m_rnti, dci.m_ndi.at (i), dci.m_tbsSize.at (i), dci.m_mcs.at (i), dlRb, i, dci.m_harqProcess, dci.m_rv.at (i),
true );
939 std::vector <int> ulRb;
940 for (
int i = 0; i < dci.m_rbLen; i++)
942 ulRb.push_back (i + dci.m_rbStart);
955 params.
m_mcs = dci.m_mcs;
956 params.
m_size = dci.m_tbSize;
957 params.
m_rv = harqInfoList.size ();
958 params.
m_ndi = dci.m_ndi;
967 if (rarMsg->GetRaRnti () ==
m_raRnti)
969 for (std::list<RarLteControlMessage::Rar>::const_iterator it = rarMsg->RarListBegin (); it != rarMsg->RarListEnd (); ++it)
980 std::vector <int> ulRb;
981 for (
int i = 0; i < it->rarPayload.m_grant.m_rbLen; i++)
983 ulRb.push_back (i + it->rarPayload.m_grant.m_rbStart);
1029 Values::const_iterator itPi;
1033 double powerTxW = ((*itPi) * 180000.0) / 12.0;
1039 double rsrp_dBm = 10 * log10 (1000 * (sum / (
double)nRB));
1041 <<
" has RSRP " << rsrp_dBm <<
" and RBnum " << nRB);
1045 std::map <uint16_t, UeMeasurementsElement>::iterator itMeasMap =
m_ueMeasurementsMap.find (cellId);
1058 (*itMeasMap).second.rsrpSum += rsrp_dBm;
1059 (*itMeasMap).second.rsrpNum++;
1088 NS_ASSERT_MSG (frameNo > 0,
"the SRS index check code assumes that frameNo starts at 1");
1111 NS_ASSERT_MSG (subframeNo > 0 && subframeNo <= 10,
"the SRS index check code assumes that subframeNo starts at 1");
1138 if (ctrlMsg.size ()>0)
1140 NS_LOG_LOGIC (
this <<
" UE - start TX PUCCH (NO PUSCH)");
1141 std::vector <int> dlRb;
1163 if (subframeNo > 10)
1180 std::vector <int> dlRb;
1221 std::list<Ptr<LteControlMessage> > l;
1224 std::vector <int> ulRb;
1287 for (
int i = 0; i < 4; i++)
1406 double gainLin = std::pow (10.0, (gain / 10.0));
1411 std::vector <double> temp;
1414 for (uint8_t i = 0; i < temp.size (); i++)
1437 msg->SetDlHarqFeedback (m);
1463 <<
" UePhy " <<
ToString (oldState)
1464 <<
" --> " <<
ToString (newState));
See section 4.3.1 dlDciListElement.
void SetTxPower(double value)
Set transmit power function.
uint16_t m_srsConfigured
SRS configured.
virtual void DoInitialize(void)
Initialize() implementation.
Simulation virtual time values and global simulation resolution.
uint8_t m_txMode
the transmission Mode
UeMemberLteUePhySapProvider class.
#define NS_LOG_FUNCTION(parameters)
If log level LOG_FUNCTION is enabled, this macro will output all input parameters separated by "...
virtual void ReceiveLteControlMessage(Ptr< LteControlMessage > msg)=0
Receive SendLteControlMessage (PDCCH map, CQI feedbacks) using the ideal control channel.
double m_noiseFigure
Loss (dB) in the Signal-to-Noise-Ratio due to non-idealities in the receiver.
See section 4.3.25 sbMeasResult.
Ptr< LteSpectrumPhy > GetUlSpectrumPhy() const
uint8_t m_componentCarrierId
component carrier ID
double pssPsdSum
PSS PSD sum.
AttributeValue implementation for Boolean.
double m_txPower
Transmission power in dBm.
std::vector< struct UeMeasurementsElement > m_ueMeasurementsList
UE measurement list.
virtual void GenerateMixedCqiReport(const SpectrumValue &sinr)
Create the mixed CQI report.
LteUePhySapUser * m_uePhySapUser
UE Phy SAP user.
uint32_t GetId(void) const
void SetTxMode5Gain(double gain)
Set transmit mode 5 gain function.
void SetCellId(uint16_t cellId)
Set the cell ID function.
virtual void SendMacPdu(Ptr< Packet > p)
Send the MAC PDU to the channel.
#define NS_OBJECT_ENSURE_REGISTERED(type)
Register an Object subclass with the TypeId system.
uint8_t m_componentCarrierId
component carrier Id used to address sap
virtual void GenerateDataCqiReport(const SpectrumValue &sinr)
generate a CQI report based on the given SINR of Data frame (used for PUSCH CQIs) ...
std::list< PssElement > m_pssList
PSS list.
void SetTxMode2Gain(double gain)
Set transmit mode 2 gain function.
bool m_ulConfigured
UL configured?
NS_ASSERT_MSG(false, "Ipv4AddressGenerator::MaskToIndex(): Impossible")
std::vector< Ptr< PacketBurst > > m_packetBurstQueue
A queue of packet bursts to be sent.
std::vector< int > GetSubChannelsForTransmission(void)
Get a list of sub channels to use in RX.
virtual void GenerateCtrlCqiReport(const SpectrumValue &sinr)
generate a CQI report based on the given SINR of Ctrl frame
Ptr< const AttributeAccessor > MakeBooleanAccessor(T1 a1)
Create an AttributeAccessor for a class data member, or a lone class get functor or set method...
TracedCallback< uint16_t, uint16_t, double, double, bool, uint8_t > m_reportUeMeasurements
The ReportUeMeasurements trace source.
Time m_a30CqiLast
last aperiodic CQI
double GetPuschTxPower(std::vector< int > rb)
Get PUSCH transmit power function.
void SetSubChannelsForTransmission(std::vector< int > mask)
Set a list of sub channels to use in TX.
double m_paLinear
PA linear.
LteUePhySapProvider * m_uePhySapProvider
UE Phy SAP provider.
uint8_t rsrqNum
Number of RSRQ samples.
#define NS_ASSERT(condition)
At runtime, in debugging builds, if this condition is not true, the program prints the source file...
void SetTxMode6Gain(double gain)
Set transmit mode 6 gain function.
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name.
Time MilliSeconds(uint64_t value)
Construct a Time in the indicated unit.
Ptr< LteSpectrumPhy > m_downlinkSpectrumPhy
The downlink LteSpectrumPhy associated to this LtePhy.
See section 4.3.2 ulDciListElement.
Service Access Point (SAP) offered by the UE PHY to the UE RRC for control purposes.
virtual void SendLteControlMessage(Ptr< LteControlMessage > msg)
Send SendLteControlMessage (PDCCH map, CQI feedbacks) using the ideal control channel.
See section 4.3.24 cqiListElement.
std::vector< double > m_txModeGain
the transmit mode gain
#define NS_LOG_INFO(msg)
Use NS_LOG to output a message of level LOG_INFO.
#define NS_FATAL_ERROR(msg)
Report a fatal error with a message and terminate.
Summary results of measuring a specific cell. Used for layer-1 filtering.
SpectrumValue m_dataInterferencePower
data interference power
uint16_t GetSrsPeriodicity(uint16_t srcCi) const
uint8_t GetMacChDelay(void) const
void QueueSubChannelsForTransmission(std::vector< int > rbMap)
queue subchannels for transmission function
uint8_t m_rv
the redundancy version (HARQ)
Service Access Point (SAP) offered by the PHY to the MAC.
void SetTxModeGain(uint8_t txMode, double gain)
Set transmit mode gain function.
Ptr< LteUePowerControl > m_powerControl
Pointer to UE Uplink Power Control entity.
virtual void DoSendMacPdu(Ptr< Packet > p)
Queue the MAC PDU to be sent (according to m_macChTtiDelay)
std::vector< int > GetSubChannelsForReception(void)
Get a list of sub channels to use in RX.
This class defines all functions to create spectrum model for lte.
Values::const_iterator ConstValuesBegin() const
uint8_t m_transmissionMode
the transmission mode
EventId m_sendSrsEvent
send SRS event
void SetHarqPhyModule(Ptr< LteHarqPhy > harq)
Set the HARQ PHY module.
uint8_t m_ulBandwidth
The UL bandwidth in number of PRBs.
bool m_pssReceived
PSS received?
Ptr< const TraceSourceAccessor > MakeTraceSourceAccessor(T a)
Create a TraceSourceAccessor which will control access to the underlying trace source.
void DoSetSrsConfigurationIndex(uint16_t srcCi)
Set SRS configuration index function.
static Ptr< SpectrumValue > CreateNoisePowerSpectralDensity(uint32_t earfcn, uint8_t bandwidth, double noiseFigure)
create a SpectrumValue that models the power spectral density of AWGN
Ptr< const AttributeChecker > MakeTimeChecker(const Time min, const Time max)
Helper to make a Time checker with bounded range.
State
The states of the UE PHY entity.
static const int Type0AllocationRbg[4]
Type 0 RGB allocation.
void DoSetTransmissionMode(uint8_t txMode)
Set transmission mode function.
The attribute can be read.
void DoConfigureUplink(uint32_t ulEarfcn, uint8_t ulBandwidth)
Configure UL uplink function.
UeMemberLteUePhySapProvider(LteUePhy *phy)
Constructor.
double GetTti(void) const
Template for the implementation of the LteUeCphySapProvider as a member of an owner class of type C t...
double m_pssReceptionThreshold
The RsrqUeMeasThreshold attribute.
uint8_t GetRbgSize(void) const
void DoSynchronizeWithEnb(uint16_t cellId)
Synchronize with ENB function.
uint8_t rsrpNum
Number of RSRP samples.
LteUeCphySapUser * m_ueCphySapUser
UE CPhy SAP user.
Ptr< const AttributeAccessor > MakePointerAccessor(T1 a1)
Create an AttributeAccessor for a class data member, or a lone class get functor or set method...
static EventId Schedule(Time const &delay, MEM mem_ptr, OBJ obj)
Schedule an event to expire after delay.
void DoDispose()
Destructor implementation.
AttributeValue implementation for Time.
uint16_t m_rsrpSinrSamplePeriod
The RsrpSinrSamplePeriod attribute.
Time NanoSeconds(uint64_t value)
Construct a Time in the indicated unit.
uint64_t m_imsi
IMSI of the scheduled UE.
See section 4.3.27 higherLayerSelected.
static Ptr< SpectrumValue > CreateTxPowerSpectralDensity(uint32_t earfcn, uint8_t bandwidth, double powerTx, std::vector< int > activeRbs)
create a spectrum value representing the power spectral density of a signal to be transmitted...
double GetNoiseFigure() const
Service Access Point (SAP) offered by the UE PHY to the UE RRC for control purposes.
void SetLteUePhySapUser(LteUePhySapUser *s)
Set the PHY SAP User.
Hold an unsigned integer type.
void DoConfigureReferenceSignalPower(int8_t referenceSignalPower)
Configure reference signal power function.
void SetTxMode3Gain(double gain)
Set transmit mode 3 gain function.
static uint8_t TxMode2LayerNum(uint8_t txMode)
Transmit mode 2 layer number.
Ptr< DlCqiLteControlMessage > CreateDlCqiFeedbackMessage(const SpectrumValue &sinr)
Create the DL CQI feedback from SINR values perceived at the physical layer with the signal received ...
void SetTxMode4Gain(double gain)
Set transmit mode 4 gain function.
void SwitchToState(State s)
Switch the UE PHY to the given state.
TracedCallback< uint16_t, uint16_t, State, State > m_stateTransitionTrace
The StateTransition trace source.
TracedCallback< uint16_t, uint16_t, double, double, uint8_t > m_reportCurrentCellRsrpSinrTrace
The ReportCurrentCellRsrpSinr trace source.
uint16_t GetSrsSubframeOffset(uint16_t srcCi) const
void SendSrs()
Send the SRS signal in the last symbols of the frame.
bool m_rsInterferencePowerUpdated
RS interference power updated?
virtual void RecvSystemInformationBlockType1(uint16_t cellId, LteRrcSap::SystemInformationBlockType1 sib1)=0
Relay an SIB1 message from the PHY entity to the RRC layer.
Ptr< LteSpectrumPhy > GetDlSpectrumPhy() const
std::vector< uint8_t > m_sbCqi
sb CQI
void SetTxMode7Gain(double gain)
Set transmit mode 7 gain function.
void DoSetPa(double pa)
Set PA function.
virtual void RecvMasterInformationBlock(uint16_t cellId, LteRrcSap::MasterInformationBlock mib)=0
Relay an MIB message from the PHY entity to the RRC layer.
See section 4.3.23 dlInfoListElement.
void DoReset()
Reset function.
double rsrpSum
Sum of RSRP sample values in linear unit.
virtual void DoSendRachPreamble(uint32_t prachId, uint32_t raRnti)
Send RACH preamble function.
uint8_t m_mcs
MCS for transport block.
virtual void ReportDataInterference(const SpectrumValue &interf)
Create the mixed CQI report.
virtual void ReceiveLteDlHarqFeedback(DlInfoListElement_s mes)
PhySpectrum generated a new DL HARQ feedback.
uint32_t m_dlEarfcn
The downlink carrier frequency.
bool m_enableUplinkPowerControl
The EnableUplinkPowerControl attribute.
uint8_t m_macChTtiDelay
Delay between MAC and channel layer in terms of TTIs.
double GetTxPower() const
static const Time UL_DATA_DURATION
Duration of the data portion of a UL subframe.
Every class exported by the ns3 library is enclosed in the ns3 namespace.
Ptr< LteHarqPhy > m_harqPhyModule
HARQ phy module.
Hold objects of type Ptr<T>.
void SetControlMessages(Ptr< LteControlMessage > m)
Ptr< const AttributeChecker > MakeBooleanChecker(void)
uint16_t m_rsrpSinrSampleCounter
The RsrpSinrSampleCounter attribute.
SpectrumValue m_rsReceivedPower
RS receive power.
double rsrqSum
Sum of RSRQ sample values in linear unit.
uint16_t m_srsSubframeOffset
SRS subframe offset.
Values::const_iterator ConstValuesEnd() const
Time m_srsStartTime
SRS start time.
uint8_t m_dlBandwidth
The DL bandwidth in number of PRBs.
static EventId ScheduleNow(MEM mem_ptr, OBJ obj)
Schedule an event to expire Now.
Ptr< const AttributeAccessor > MakeTimeAccessor(T1 a1)
Create an AttributeAccessor for a class data member, or a lone class get functor or set method...
uint16_t m_size
Size of transport block.
static Time Now(void)
Return the current simulation virtual time.
Ptr< LteNetDevice > GetDevice() const
Get the device where the phy layer is attached.
uint16_t m_cellId
Cell identifier.
NS_LOG_LOGIC("Net device "<< nd<< " is not bridged")
uint8_t m_ndi
new data indicator flag
void SubframeIndication(uint32_t frameNo, uint32_t subframeNo)
trigger from eNB the start from a new frame
virtual void DoInitialize(void)
Initialize() implementation.
void DoSetDlBandwidth(uint8_t dlBandwidth)
Set DL bandwidth function.
void SetRnti(uint16_t rnti)
Set the RNTI function.
Time m_a30CqiPeriodicity
SubBand Aperiodic CQI.
Ptr< const AttributeAccessor > MakeDoubleAccessor(T1 a1)
Create an AttributeAccessor for a class data member, or a lone class get functor or set method...
void SetTxMode1Gain(double gain)
Set transmit mode 1 gain function.
std::vector< int > m_subChannelsForTransmission
A list of sub channels to use in TX.
void DoStartCellSearch(uint32_t dlEarfcn)
Start the cell search function.
uint32_t m_raRnti
RA rnti.
static void ScheduleWithContext(uint32_t context, Time const &delay, MEM mem_ptr, OBJ obj)
Schedule an event with the given context.
bool m_dlConfigured
DL configured?
virtual void ReceiveLteControlMessageList(std::list< Ptr< LteControlMessage > > msgList)
Receive LTE control message list function.
Ptr< LteNetDevice > m_netDevice
Pointer to the NetDevice where this PHY layer is attached.
std::vector< std::vector< int > > m_subChannelsForTransmissionQueue
subchannels for transmission queue
std::list< Ptr< LteControlMessage > > GetControlMessages(void)
static const std::string & ToString(EpcUeNas::State s)
LteUeCphySapProvider * m_ueCphySapProvider
UE CPhy SAP provider.
std::map< uint16_t, UeMeasurementsElement > m_ueMeasurementsMap
Store measurement results during the last layer-1 filtering period.
Ptr< PacketBurst > GetPacketBurst(void)
uint16_t m_cellId
Cell ID of the attached Enb.
static const std::string g_uePhyStateName[LteUePhy::NUM_STATES]
Map each of UE PHY states to its string representation.
#define NS_LOG_WARN(msg)
Use NS_LOG to output a message of level LOG_WARN.
int64_t GetMilliSeconds(void) const
Get an approximation of the time stored in this instance in the indicated unit.
std::vector< int > m_subChannelsForReception
A list of sub channels to use in RX.
Service Access Point (SAP) offered by the UE-PHY to the UE-MAC.
static const Time UL_SRS_DELAY_FROM_SUBFRAME_START
Delay from subframe start to transmission of SRS.
#define NS_LOG_DEBUG(msg)
Use NS_LOG to output a message of level LOG_DEBUG.
uint8_t m_layer
the layer (cw) of the transmission
Time Seconds(double value)
Construct a Time in the indicated unit.
void SetTxPower(double pow)
virtual void ReceivePss(uint16_t cellId, Ptr< SpectrumValue > p)
Receive PSS function.
double GetPucchTxPower(std::vector< int > rb)
Get PUCCH transmit power function.
UeMeasurementsParameters structure.
uint16_t m_srsPeriodicity
SRS periodicity.
LteUePhySapProvider * GetLteUePhySapProvider()
Get the PHY SAP provider.
void Cancel(void)
This method is syntactic sugar for the ns3::Simulator::Cancel method.
virtual void SendRachPreamble(uint32_t prachId, uint32_t raRnti)
send a preamble on the PRACH
uint32_t m_raPreambleId
RA preamble ID.
uint8_t m_rbgSize
The RB group size according to the bandwidth.
void SetLteUeCphySapUser(LteUeCphySapUser *s)
Set the CPHY SAP User.
SpectrumValue m_rsInterferencePower
RS interference power.
friend class UeMemberLteUePhySapProvider
allow UeMemberLteUePhySapProvider class friend access
double GetSrsTxPower(std::vector< int > rb)
Get SRS transmit power function.
void PhyPduReceived(Ptr< Packet > p)
PhySpectrum received a new PHY-PDU.
uint8_t m_ccId
component carrier id
void SetRsrp(double value)
Set RSRP function.
virtual void DoSendLteControlMessage(Ptr< LteControlMessage > msg)
Send LTE control message function.
std::vector< std::list< Ptr< LteControlMessage > > > m_controlMessagesQueue
A queue of control messages to be sent.
bool m_rsReceivedPowerUpdated
RS receive power updated?
Ptr< LteUePowerControl > GetUplinkPowerControl() const
void ConfigureReferenceSignalPower(int8_t referenceSignalPower)
Configure reference signal power function.
void GenerateCqiRsrpRsrq(const SpectrumValue &sinr)
internal method that takes care of generating CQI reports, calculating the RSRP and RSRQ metrics...
The LteSpectrumPhy models the physical layer of LTE.
uint32_t m_ulEarfcn
The uplink carrier frequency.
Ptr< LteSpectrumPhy > m_uplinkSpectrumPhy
The uplink LteSpectrumPhy associated to this LtePhy.
virtual void ReportRsReceivedPower(const SpectrumValue &power)
generate a report based on the linear RS power perceived during CTRL frame NOTE: used only by UE for ...
PhyTransmissionStatParameters structure.
Time m_p10CqiLast
last periodic CQI
Parameters of the ReportUeMeasurements primitive: RSRP [dBm] and RSRQ [dB] See section 5...
LteUeCphySapProvider * GetLteUeCphySapProvider()
Get the CPHY SAP provider.
This class can be used to hold variables of floating point type such as 'double' or 'float'...
State m_state
The current UE PHY state.
int64_t m_timestamp
in millisecond
Set of values corresponding to a given SpectrumModel.
Ptr< const AttributeAccessor > MakeUintegerAccessor(T1 a1)
Create an AttributeAccessor for a class data member, or a lone class get functor or set method...
void SetMacPdu(Ptr< Packet > p)
std::vector< struct HigherLayerSelected_s > m_higherLayerSelected
higher layer selected
a unique identifier for an interface.
TypeId SetParent(TypeId tid)
Set the parent TypeId.
bool m_dataInterferencePowerUpdated
data interference power updated?
void SetNoiseFigure(double nf)
TracedCallback< PhyTransmissionStatParameters > m_ulPhyTransmission
The UlPhyTransmission trace source.
uint16_t m_rnti
C-RNTI scheduled.
static TypeId GetTypeId(void)
Get the type ID.
Time m_p10CqiPeriodicity
Wideband Periodic CQI. 2, 5, 10, 16, 20, 32, 40, 64, 80 or 160 ms.
The LtePhy models the physical layer of LTE.
void ReportUeMeasurements()
Layer-1 filtering of RSRP and RSRQ measurements and reporting to the RRC entity.
virtual void ReportInterference(const SpectrumValue &interf)
generate a report based on the linear interference and noise power perceived during DATA frame NOTE: ...
virtual void ReceivePhyPdu(Ptr< Packet > p)=0
Called by the Phy to notify the MAC of the reception of a new PHY-PDU.
virtual Ptr< SpectrumValue > CreateTxPowerSpectralDensity()
Create the PSD for the TX.
void ReportTpc(uint8_t tpc)
Set RSRP function.
#define UL_PUSCH_TTIS_DELAY
Ptr< SpectrumValue > m_noisePsd
Noise power spectral density for the configured bandwidth.
void DoSetRnti(uint16_t rnti)
Set RNTI function.
virtual void SubframeIndication(uint32_t frameNo, uint32_t subframeNo)=0
Trigger the start from a new frame (input from Phy layer)
virtual void ReportUeMeasurements(UeMeasurementsParameters params)=0
Send a report of RSRP and RSRQ values perceived from PSS by the PHY entity (after applying layer-1 fi...
std::vector< HarqProcessInfoElement_t > HarqProcessInfoList_t
HarqProcessInfoList_t typedef.
void SetSubChannelsForReception(std::vector< int > mask)
Get a list of sub channels to use in RX.
The LteUeNetDevice class implements the UE net device.
virtual void DoDispose(void)
Destructor implementation.
Time m_ueMeasurementsFilterPeriod
The UeMeasurementsFilterPeriod attribute.