olsr-hna.cc

Go to the documentation of this file.

/* -*- Mode:C++; c-file-style:"gnu"; indent-tabs-mode:nil; -*- */
/*
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation;
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 * Authors: Lalith Suresh <suresh.lalith@gmail.com>
 *
 */

//
// This script, adapted from examples/wireless/wifi-simple-adhoc illustrates
// the use of OLSR HNA.
//
// Network Topology:
//
//             |------ OLSR ------|   |---- non-OLSR ----|
//           A ))))            (((( B ------------------- C
//           10.1.1.1     10.1.1.2   172.16.1.2     172.16.1.1
//
// Node A needs to send a UDP packet to node C. This can be done only after
// A receives an HNA message from B, in which B announces 172.16.1.0/24
// as an associated network.
//
// If no HNA message is generated by B, a will not be able to form a route to C.
// This can be verified as follows:
//
// ./waf --run olsr-hna
//
// There are two ways to make a node to generate HNA messages.
//
// One way is to use olsr::RoutingProtocol::SetRoutingTableAssociation ()
// to use which you may run:
//
// ./waf --run "olsr-hna --assocMethod1=1"
//
// The other way is to use olsr::RoutingProtocol::AddHostNetworkAssociation ()
// to use which you may run:
//
// ./waf --run "olsr-hna --assocMethod2=1"
//

#include <iostream>
#include <fstream>
#include <vector>
#include <string>
#include "ns3/core-module.h"
#include "ns3/network-module.h"
#include "ns3/mobility-module.h"
#include "ns3/config-store-module.h"
#include "ns3/csma-module.h"
#include "ns3/internet-module.h"
#include "ns3/olsr-routing-protocol.h"
#include "ns3/olsr-helper.h"
#include "ns3/yans-wifi-helper.h"

using namespace ns3;

NS_LOG_COMPONENT_DEFINE ("OlsrHna");

void ReceivePacket (Ptr<Socket> socket)
{
  NS_LOG_UNCOND ("Received one packet!");
}

static void GenerateTraffic (Ptr<Socket> socket, uint32_t pktSize,
                             uint32_t pktCount, Time pktInterval )
{
  if (pktCount > 0)
    {
      socket->Send (Create<Packet> (pktSize));
      Simulator::Schedule (pktInterval, &GenerateTraffic,
                           socket, pktSize,pktCount - 1, pktInterval);
    }
  else
    {
      socket->Close ();
    }
}


int main (int argc, char *argv[])
{
  std::string phyMode ("DsssRate1Mbps");
  double rss = -80;  // -dBm
  uint32_t packetSize = 1000; // bytes
  uint32_t numPackets = 1;
  double interval = 1.0; // seconds
  bool verbose = false;
  bool assocMethod1 = false;
  bool assocMethod2 = false;

  CommandLine cmd;

  cmd.AddValue ("phyMode", "Wifi Phy mode", phyMode);
  cmd.AddValue ("rss", "received signal strength", rss);
  cmd.AddValue ("packetSize", "size of application packet sent", packetSize);
  cmd.AddValue ("numPackets", "number of packets generated", numPackets);
  cmd.AddValue ("interval", "interval (seconds) between packets", interval);
  cmd.AddValue ("verbose", "turn on all WifiNetDevice log components", verbose);
  cmd.AddValue ("assocMethod1", "Use SetRoutingTableAssociation () method", assocMethod1);
  cmd.AddValue ("assocMethod2", "Use AddHostNetworkAssociation () method", assocMethod2);

  cmd.Parse (argc, argv);
  // Convert to time object
  Time interPacketInterval = Seconds (interval);

  // disable fragmentation for frames below 2200 bytes
  Config::SetDefault ("ns3::WifiRemoteStationManager::FragmentationThreshold", StringValue ("2200"));
  // turn off RTS/CTS for frames below 2200 bytes
  Config::SetDefault ("ns3::WifiRemoteStationManager::RtsCtsThreshold", StringValue ("2200"));
  // Fix non-unicast data rate to be the same as that of unicast
  Config::SetDefault ("ns3::WifiRemoteStationManager::NonUnicastMode",
                      StringValue (phyMode));

  NodeContainer olsrNodes;
  olsrNodes.Create (2);

  NodeContainer csmaNodes;
  csmaNodes.Create (1);

  // The below set of helpers will help us to put together the wifi NICs we want
  WifiHelper wifi;
  if (verbose)
    {
      wifi.EnableLogComponents ();  // Turn on all Wifi logging
    }
  wifi.SetStandard (WIFI_PHY_STANDARD_80211b);

  YansWifiPhyHelper wifiPhy =  YansWifiPhyHelper::Default ();
  // This is one parameter that matters when using FixedRssLossModel
  // set it to zero; otherwise, gain will be added
  wifiPhy.Set ("RxGain", DoubleValue (0) );
  // ns-3 supports RadioTap and Prism tracing extensions for 802.11b
  wifiPhy.SetPcapDataLinkType (WifiPhyHelper::DLT_IEEE802_11_RADIO);

  YansWifiChannelHelper wifiChannel;
  wifiChannel.SetPropagationDelay ("ns3::ConstantSpeedPropagationDelayModel");
  // The below FixedRssLossModel will cause the rss to be fixed regardless
  // of the distance between the two stations, and the transmit power
  wifiChannel.AddPropagationLoss ("ns3::FixedRssLossModel","Rss",DoubleValue (rss));
  wifiPhy.SetChannel (wifiChannel.Create ());

  // Add a mac and disable rate control
  WifiMacHelper wifiMac;
  wifi.SetRemoteStationManager ("ns3::ConstantRateWifiManager",
                                "DataMode",StringValue (phyMode),
                                "ControlMode",StringValue (phyMode));
  // Set it to adhoc mode
  wifiMac.SetType ("ns3::AdhocWifiMac");
  NetDeviceContainer devices = wifi.Install (wifiPhy, wifiMac, olsrNodes);

  CsmaHelper csma;
  csma.SetChannelAttribute ("DataRate", DataRateValue (DataRate (5000000)));
  csma.SetChannelAttribute ("Delay", TimeValue (MilliSeconds (2)));
  NetDeviceContainer csmaDevices = csma.Install (NodeContainer (csmaNodes.Get (0), olsrNodes.Get (1)));

  // Note that with FixedRssLossModel, the positions below are not
  // used for received signal strength.
  MobilityHelper mobility;
  Ptr<ListPositionAllocator> positionAlloc = CreateObject<ListPositionAllocator> ();
  positionAlloc->Add (Vector (0.0, 0.0, 0.0));
  positionAlloc->Add (Vector (5.0, 0.0, 0.0));
  mobility.SetPositionAllocator (positionAlloc);
  mobility.SetMobilityModel ("ns3::ConstantPositionMobilityModel");
  mobility.Install (olsrNodes);

  OlsrHelper olsr;

  // Specify Node B's csma device as a non-OLSR device.
  olsr.ExcludeInterface (olsrNodes.Get (1), 2);

  Ipv4StaticRoutingHelper staticRouting;

  Ipv4ListRoutingHelper list;
  list.Add (staticRouting, 0);
  list.Add (olsr, 10);

  InternetStackHelper internet_olsr;
  internet_olsr.SetRoutingHelper (list); // has effect on the next Install ()
  internet_olsr.Install (olsrNodes);

  InternetStackHelper internet_csma;
  internet_csma.Install (csmaNodes);

  Ipv4AddressHelper ipv4;
  NS_LOG_INFO ("Assign IP Addresses.");
  ipv4.SetBase ("10.1.1.0", "255.255.255.0");
  ipv4.Assign (devices);

  ipv4.SetBase ("172.16.1.0", "255.255.255.0");
  ipv4.Assign (csmaDevices);

  TypeId tid = TypeId::LookupByName ("ns3::UdpSocketFactory");
  Ptr<Socket> recvSink = Socket::CreateSocket (csmaNodes.Get (0), tid);
  InetSocketAddress local = InetSocketAddress (Ipv4Address::GetAny (), 80);
  recvSink->Bind (local);
  recvSink->SetRecvCallback (MakeCallback (&ReceivePacket));

  Ptr<Socket> source = Socket::CreateSocket (olsrNodes.Get (0), tid);
  InetSocketAddress remote = InetSocketAddress (Ipv4Address ("172.16.1.1"), 80);
  source->Connect (remote);

  // Obtain olsr::RoutingProtocol instance of gateway node
  // (namely, node B) and add the required association
  Ptr<Ipv4> stack = olsrNodes.Get (1)->GetObject<Ipv4> ();
  Ptr<Ipv4RoutingProtocol> rp_Gw = (stack->GetRoutingProtocol ());
  Ptr<Ipv4ListRouting> lrp_Gw = DynamicCast<Ipv4ListRouting> (rp_Gw);

  Ptr<olsr::RoutingProtocol> olsrrp_Gw;

  for (uint32_t i = 0; i < lrp_Gw->GetNRoutingProtocols ();  i++)
    {
      int16_t priority;
      Ptr<Ipv4RoutingProtocol> temp = lrp_Gw->GetRoutingProtocol (i, priority);
      if (DynamicCast<olsr::RoutingProtocol> (temp))
        {
          olsrrp_Gw = DynamicCast<olsr::RoutingProtocol> (temp);
        }
    }

  if (assocMethod1)
    {
      // Create a special Ipv4StaticRouting instance for RoutingTableAssociation
      // Even the Ipv4StaticRouting instance added to list may be used
      Ptr<Ipv4StaticRouting> hnaEntries = Create<Ipv4StaticRouting> ();

      // Add the required routes into the Ipv4StaticRouting Protocol instance
      // and have the node generate HNA messages for all these routes
      // which are associated with non-OLSR interfaces specified above.
      hnaEntries->AddNetworkRouteTo (Ipv4Address ("172.16.1.0"), Ipv4Mask ("255.255.255.0"), uint32_t (2), uint32_t (1));
      olsrrp_Gw->SetRoutingTableAssociation (hnaEntries);
    }

  if (assocMethod2)
    {
      // Specify the required associations directly.
      olsrrp_Gw->AddHostNetworkAssociation (Ipv4Address ("172.16.1.0"), Ipv4Mask ("255.255.255.0"));
    }

  // Tracing
  wifiPhy.EnablePcap ("olsr-hna", devices);
  csma.EnablePcap ("olsr-hna", csmaDevices, false);

  Simulator::ScheduleWithContext (source->GetNode ()->GetId (),
                                  Seconds (15.0), &GenerateTraffic,
                                  source, packetSize, numPackets, interPacketInterval);

  Simulator::Stop (Seconds (20.0));
  Simulator::Run ();
  Simulator::Destroy ();

  return 0;
}