Reference   Language | Libraries | Comparison | Changes

SoftwareSerial: print(data)

Description

Prints data to the transmit pin of the software serial port. Works the same as the Serial.print() function.

Parameters

vary, see Serial.print() for details

Returns

byte
print() will return the number of bytes written, though reading that number is optional

Example

SoftwareSerial serial(10,11);
int analogValue;

void setup()
{
  serial.begin(9600);
}

void loop()
{
  // read the analog input on pin 0:
  analogValue = analogRead(A0);

  // print it out in many formats:
  serial.print(analogValue);         // print as an ASCII-encoded decimal
  serial.print("\t");                // print a tab character
  serial.print(analogValue, DEC);    // print as an ASCII-encoded decimal
  serial.print("\t");                // print a tab character
  serial.print(analogValue, HEX);    // print as an ASCII-encoded hexadecimal
  serial.print("\t");                // print a tab character
  serial.print(analogValue, OCT);    // print as an ASCII-encoded octal
  serial.print("\t");                // print a tab character
  serial.print(analogValue, BIN);    // print as an ASCII-encoded binary
  serial.print("\t");                // print a tab character
  serial.print(analogValue/4, BYTE); // print as a raw byte value (divide the
                                     // value by 4 because analogRead() returns numbers
                                     // from 0 to 1023, but a byte can only hold values
                                     // up to 255)
  serial.print("\t");                // print a tab character    
  serial.println();                  // print a linefeed character

  // delay 10 milliseconds before the next reading:
  delay(10);
}

See also

Reference Home

Corrections, suggestions, and new documentation should be posted to the Forum.

The text of the Arduino reference is licensed under a Creative Commons Attribution-ShareAlike 3.0 License. Code samples in the reference are released into the public domain.