NB Test Web Server
This sketch creates a web server to accept incoming connections on the Arduino MKR NB 1500. Some network providers only allow requests from inside their own network. You will need to check with your network provider to make sure your SIM card will accept incoming HTTP requests.
Hardware Required
- Arduino MKR NB 1500
- antenna
- SIM card enable for Data
Circuit
Code
The complete sketch is below.
SORRY, There is an error at our code repository, please inform to web@arduino.cc
See Also
- Arduino MKR NB 1500 – Complete product description.
- Getting started with the MKR NB 1500 – Get everything set up in minutes.
- MKRNB library – Your reference for the NB Library.
- MKRNBScanNetworks - Scans the available networks and prints informations about IMEI and number of the SIM card.
- MKRNBToolsTestGPRS - Tries to access the internet over GPRS.
- MKRNBToolsPinManagement - How to to change or remove the PIN number.
- MKRNBToolsTestModem - Tests to see if the modem of the MKR NB 1500 is working correctly.
server IP address.
Last revision 2018/11/28 by SM
