Extends

• Phaser.Sprite

Members

alive :boolean

A useful flag to control if the Game Object is alive or dead.

This is set automatically by the Health components damage method should the object run out of health.
Or you can toggle it via your game code.

This property is mostly just provided to be used by your game - it doesn't effect rendering or logic updates.
However you can use Group.getFirstAlive in conjunction with this property for fast object pooling and recycling.

Inherited From:

• Phaser.Component.LifeSpan#alive

Default Value:

• true

Source - gameobjects/components/LifeSpan.js, line 50

anchor :Point

The anchor sets the origin point of the texture.
The default is 0,0 this means the texture's origin is the top left
Setting than anchor to 0.5,0.5 means the textures origin is centered
Setting the anchor to 1,1 would mean the textures origin points will be the bottom right corner

Inherited From:

• PIXI.Sprite#anchor

Source - pixi/display/Sprite.js, line 17

angle :number

The angle property is the rotation of the Game Object in degrees from its original orientation.

Values from 0 to 180 represent clockwise rotation; values from 0 to -180 represent counterclockwise rotation.

Values outside this range are added to or subtracted from 360 to obtain a value within the range.
For example, the statement player.angle = 450 is the same as player.angle = 90.

If you wish to work in radians instead of degrees you can use the property rotation instead.
Working in radians is slightly faster as it doesn't have to perform any calculations.

Inherited From:

• Phaser.Component.Angle#angle

Source - gameobjects/components/Angle.js, line 29

animations :Phaser.AnimationManager

If the Game Object is enabled for animation (such as a Phaser.Sprite) this is a reference to its AnimationManager instance.
Through it you can create, play, pause and stop animations.

Inherited From:

• Phaser.Component.Core#animations

Source - gameobjects/components/Core.js, line 193

See:

• Phaser.AnimationManager

autoCull :boolean

A Game Object with autoCull set to true will check its bounds against the World Camera every frame.
If it is not intersecting the Camera bounds at any point then it has its renderable property set to false.
This keeps the Game Object alive and still processing updates, but forces it to skip the render step entirely.

This is a relatively expensive operation, especially if enabled on hundreds of Game Objects. So enable it only if you know it's required,
or you have tested performance and find it acceptable.

Inherited From:

• Phaser.Component.AutoCull#autoCull

Source - gameobjects/components/AutoCull.js, line 28

blendMode :Number

The blend mode to be applied to the sprite. Set to PIXI.blendModes.NORMAL to remove any blend mode.

Warning: You cannot have a blend mode and a filter active on the same Sprite. Doing so will render the sprite invisible.

Inherited From:

• PIXI.Sprite#blendMode

Default Value:

• PIXI.blendModes.NORMAL;

Source - pixi/display/Sprite.js, line 82

body :Phaser.Physics.Arcade.Body|Phaser.Physics.P2.Body|Phaser.Physics.Ninja.Body|null

body is the Game Objects physics body. Once a Game Object is enabled for physics you access all associated
properties and methods via it.

By default Game Objects won't add themselves to any physics system and their body property will be null.

To enable this Game Object for physics you need to call game.physics.enable(object, system) where object is this object
and system is the Physics system you are using. If none is given it defaults to Phaser.Physics.Arcade.

You can alternatively call game.physics.arcade.enable(object), or add this Game Object to a physics enabled Group.

Important: Enabling a Game Object for P2 or Ninja physics will automatically set its anchor property to 0.5,
so the physics body is centered on the Game Object.

If you need a different result then adjust or re-create the Body shape offsets manually or reset the anchor after enabling physics.

Type:

• Phaser.Physics.Arcade.Body | Phaser.Physics.P2.Body | Phaser.Physics.Ninja.Body | null

Inherited From:

• Phaser.Component.PhysicsBody#body

Source - gameobjects/components/PhysicsBody.js, line 91

bottom :number

The sum of the y and height properties.
This is the same as y + height - offsetY.

Inherited From:

• Phaser.Component.Bounds#bottom

Source - gameobjects/components/Bounds.js, line 168

cameraOffset :Phaser.Point

The x/y coordinate offset applied to the top-left of the camera that this Game Object will be drawn at if fixedToCamera is true.

The values are relative to the top-left of the camera view and in addition to any parent of the Game Object on the display list.

Inherited From:

• Phaser.Component.FixedToCamera#cameraOffset

Source - gameobjects/components/FixedToCamera.js, line 86

<internal> canvas :HTMLCanvasElement

The canvas to which this TilemapLayer draws.

Internal:

• This member is internal (protected) and may be modified or removed in the future.

Source - tilemap/TilemapLayer.js, line 59

centerX :number

The center x coordinate of the Game Object.
This is the same as (x - offsetX) + (width / 2).

Inherited From:

• Phaser.Component.Bounds#centerX

Source - gameobjects/components/Bounds.js, line 58

centerY :number

The center y coordinate of the Game Object.
This is the same as (y - offsetY) + (height / 2).

Inherited From:

• Phaser.Component.Bounds#centerY

Source - gameobjects/components/Bounds.js, line 80

checkWorldBounds :boolean

If this is set to true the Game Object checks if it is within the World bounds each frame.

When it is no longer intersecting the world bounds it dispatches the onOutOfBounds event.

If it was previously out of bounds but is now intersecting the world bounds again it dispatches the onEnterBounds event.

It also optionally kills the Game Object if outOfBoundsKill is true.

When checkWorldBounds is enabled it forces the Game Object to calculate its full bounds every frame.

This is a relatively expensive operation, especially if enabled on hundreds of Game Objects. So enable it only if you know it's required,
or you have tested performance and find it acceptable.

Inherited From:

• Phaser.Component.InWorld#checkWorldBounds

Source - gameobjects/components/InWorld.js, line 98

<readonly> children :Array.<DisplayObject>

[read-only] The array of children of this container.

Type:

• Array.<DisplayObject>

Inherited From:

• PIXI.DisplayObjectContainer#children

Source - pixi/display/DisplayObjectContainer.js, line 17

<internal> components :object

The components this Game Object has installed.

Inherited From:

• Phaser.Component.Core#components

Internal:

• This member is internal (protected) and may be modified or removed in the future.

Source - gameobjects/components/Core.js, line 167

cropRect :Phaser.Rectangle

The Rectangle used to crop the texture this Game Object uses.
Set this property via crop.
If you modify this property directly you must call updateCrop in order to have the change take effect.

Inherited From:

• Phaser.Component.Crop#cropRect

Source - gameobjects/components/Crop.js, line 24

damage

Damages the Game Object. This removes the given amount of health from the health property.

If health is taken below or is equal to zero then the kill method is called.

Inherited From:

• Phaser.Component.Health#damage

Source - gameobjects/components/Health.js, line 46

data :Object

An empty Object that belongs to this Game Object.
This value isn't ever used internally by Phaser, but may be used by your own code, or
by Phaser Plugins, to store data that needs to be associated with the Game Object,
without polluting the Game Object directly.

Inherited From:

• Phaser.Component.Core#data

Default Value:

• {}

Source - gameobjects/components/Core.js, line 160

debug :boolean

Enable an additional "debug rendering" pass to display collision information.

Source - tilemap/TilemapLayer.js, line 110

debugSettings

Settings used for debugging and diagnostics.

Properties:

Name	Type	Argument	Description
missingImageFill	string	<nullable>	A tile is rendered as a rectangle using the following fill if a valid tileset/image cannot be found. A value of null prevents additional rendering for tiles without a valid tileset image. This takes effect even when debug rendering for the layer is not enabled.
debuggedTileOverfill	string	<nullable>	If a Tile has Tile#debug true then, after normal tile image rendering, a rectangle with the following fill is drawn above/over it. This takes effect even when debug rendering for the layer is not enabled.
forceFullRedraw	boolean		When debug rendering (debug is true), and this option is enabled, the a full redraw is forced and rendering optimization is suppressed.
debugAlpha	number		When debug rendering (debug is true), the tileset is initially rendered with this alpha level. This can make the tile edges clearer.
facingEdgeStroke	string	<nullable>	When debug rendering (debug is true), this color/stroke is used to draw "face" edges. A value of null disables coloring facing edges.
collidingTileOverfill	string	<nullable>	When debug rendering (debug is true), this fill is used for tiles that are collidable. A value of null disables applying the additional overfill.

Source - tilemap/TilemapLayer.js, line 133

<readonly> deltaX :number

Returns the delta x value. The difference between world.x now and in the previous frame.

The value will be positive if the Game Object has moved to the right or negative if to the left.

Inherited From:

• Phaser.Component.Delta#deltaX

Source - gameobjects/components/Delta.js, line 24

<readonly> deltaY :number

Returns the delta y value. The difference between world.y now and in the previous frame.

The value will be positive if the Game Object has moved down or negative if up.

Inherited From:

• Phaser.Component.Delta#deltaY

Source - gameobjects/components/Delta.js, line 42

<readonly> deltaZ :number

Returns the delta z value. The difference between rotation now and in the previous frame. The delta value.

Inherited From:

• Phaser.Component.Delta#deltaZ

Source - gameobjects/components/Delta.js, line 58

<readonly> destroyPhase :boolean

As a Game Object runs through its destroy method this flag is set to true,
and can be checked in any sub-systems or plugins it is being destroyed from.

Inherited From:

• Phaser.Component.Destroy#destroyPhase

Source - gameobjects/components/Destroy.js, line 22

<internal> dirty :boolean

If true tiles will be force rendered, even if such is not believed to be required.

Internal:

• This member is internal (protected) and may be modified or removed in the future.

Source - tilemap/TilemapLayer.js, line 167

events :Phaser.Events

All Phaser Game Objects have an Events class which contains all of the events that are dispatched when certain things happen to this
Game Object, or any of its components.

Inherited From:

• Phaser.Component.Core#events

Source - gameobjects/components/Core.js, line 185

See:

• Phaser.Events

exists :boolean

Controls if the core game loop and physics update this game object or not.

Source - tilemap/TilemapLayer.js, line 115

fixedToCamera :boolean

A Game Object that is "fixed" to the camera uses its x/y coordinates as offsets from the top left of the camera during rendering.

The values are adjusted at the rendering stage, overriding the Game Objects actual world position.

The end result is that the Game Object will appear to be 'fixed' to the camera, regardless of where in the game world
the camera is viewing. This is useful if for example this Game Object is a UI item that you wish to be visible at all times
regardless where in the world the camera is.

The offsets are stored in the cameraOffset property.

Note that the cameraOffset values are in addition to any parent of this Game Object on the display list.

Be careful not to set fixedToCamera on Game Objects which are in Groups that already have fixedToCamera enabled on them.

Inherited From:

• Phaser.Component.FixedToCamera#fixedToCamera

Source - gameobjects/components/FixedToCamera.js, line 56

frame :integer

Gets or sets the current frame index of the texture being used to render this Game Object.

To change the frame set frame to the index of the new frame in the sprite sheet you wish this Game Object to use,
for example: player.frame = 4.

If the frame index given doesn't exist it will revert to the first frame found in the texture.

If you are using a texture atlas then you should use the frameName property instead.

If you wish to fully replace the texture being used see loadTexture.

Inherited From:

• Phaser.Component.LoadTexture#frame

Source - gameobjects/components/LoadTexture.js, line 254

frameName :string

Gets or sets the current frame name of the texture being used to render this Game Object.

To change the frame set frameName to the name of the new frame in the texture atlas you wish this Game Object to use,
for example: player.frameName = "idle".

If the frame name given doesn't exist it will revert to the first frame found in the texture and throw a console warning.

If you are using a sprite sheet then you should use the frame property instead.

If you wish to fully replace the texture being used see loadTexture.

Inherited From:

• Phaser.Component.LoadTexture#frameName

Source - gameobjects/components/LoadTexture.js, line 279

<readonly> fresh :boolean

A Game Object is considered fresh if it has just been created or reset and is yet to receive a renderer transform update.
This property is mostly used internally by the physics systems, but is exposed for the use of plugins.

Inherited From:

• Phaser.Component.Core#fresh

Source - gameobjects/components/Core.js, line 248

game :Phaser.Game

A reference to the currently running Game.

Inherited From:

• Phaser.Component.Core#game

Source - gameobjects/components/Core.js, line 142

heal

Heal the Game Object. This adds the given amount of health to the health property.

Inherited From:

• Phaser.Component.Health#heal

Source - gameobjects/components/Health.js, line 90

health :number

The Game Objects health value. This is a handy property for setting and manipulating health on a Game Object.

It can be used in combination with the damage method or modified directly.

Inherited From:

• Phaser.Component.Health#health

Default Value:

• 1

Source - gameobjects/components/Health.js, line 26

height :Number

The height of the sprite, setting this will actually modify the scale to achieve the value set

Inherited From:

• PIXI.Sprite#height

Source - pixi/display/Sprite.js, line 144

ignoreChildInput :Boolean

If ignoreChildInput is false it will allow this objects children to be considered as valid for Input events.

If this property is true then the children will not be considered as valid for Input events.

Note that this property isn't recursive: only immediate children are influenced, it doesn't scan further down.

Inherited From:

• PIXI.DisplayObjectContainer#ignoreChildInput

Source - pixi/display/DisplayObjectContainer.js, line 26

<readonly> inCamera :boolean

Checks if the Game Objects bounds intersect with the Game Camera bounds.
Returns true if they do, otherwise false if fully outside of the Cameras bounds.

Inherited From:

• Phaser.Component.AutoCull#inCamera

Source - gameobjects/components/AutoCull.js, line 37

<internal, readonly> index :number

The index of this layer within the Tilemap.

Internal:

• This member is internal (protected) and may be modified or removed in the future.

Source - tilemap/TilemapLayer.js, line 44

input :Phaser.InputHandler|null

The Input Handler for this Game Object.

By default it is disabled. If you wish this Game Object to process input events you should enable it with: inputEnabled = true.

After you have done this, this property will be a reference to the Phaser InputHandler.

Type:

• Phaser.InputHandler | null

Inherited From:

• Phaser.Component.InputEnabled#input

Source - gameobjects/components/InputEnabled.js, line 24

inputEnabled :boolean

By default a Game Object won't process any input events. By setting inputEnabled to true a Phaser.InputHandler is created
for this Game Object and it will then start to process click / touch events and more.

You can then access the Input Handler via this.input.

Note that Input related events are dispatched from this.events, i.e.: events.onInputDown.

If you set this property to false it will stop the Input Handler from processing any more input events.

If you want to temporarily disable input for a Game Object, then it's better to set
input.enabled = false, as it won't reset any of the Input Handlers internal properties.
You can then toggle this back on as needed.

Inherited From:

• Phaser.Component.InputEnabled#inputEnabled

Source - gameobjects/components/InputEnabled.js, line 42

<readonly> inWorld :boolean

Checks if the Game Objects bounds are within, or intersect at any point with the Game World bounds.

Inherited From:

• Phaser.Component.InWorld#inWorld

Source - gameobjects/components/InWorld.js, line 129

key :string|Phaser.RenderTexture|Phaser.BitmapData|Phaser.Video|PIXI.Texture

The key of the image or texture used by this Game Object during rendering.
If it is a string it's the string used to retrieve the texture from the Phaser Image Cache.
It can also be an instance of a RenderTexture, BitmapData, Video or PIXI.Texture.
If a Game Object is created without a key it is automatically assigned the key __default which is a 32x32 transparent PNG stored within the Cache.
If a Game Object is given a key which doesn't exist in the Image Cache it is re-assigned the key __missing which is a 32x32 PNG of a green box with a line through it.

Type:

• string | Phaser.RenderTexture | Phaser.BitmapData | Phaser.Video | PIXI.Texture

Inherited From:

• Phaser.Component.Core#key

Source - gameobjects/components/Core.js, line 203

<internal, readonly> layer :object

The layer object within the Tilemap that this layer represents.

Internal:

• This member is internal (protected) and may be modified or removed in the future.

Source - tilemap/TilemapLayer.js, line 52

left :number

The left coordinate of the Game Object.
This is the same as x - offsetX.

Inherited From:

• Phaser.Component.Bounds#left

Source - gameobjects/components/Bounds.js, line 102

lifespan :number

The lifespan allows you to give a Game Object a lifespan in milliseconds.

Once the Game Object is 'born' you can set this to a positive value.

It is automatically decremented by the millisecond equivalent of game.time.physicsElapsed each frame.
When it reaches zero it will call the kill method.

Very handy for particles, bullets, collectibles, or any other short-lived entity.

Inherited From:

• Phaser.Component.LifeSpan#lifespan

Source - gameobjects/components/LifeSpan.js, line 65

<internal, readonly> map :Phaser.Tilemap

The Tilemap to which this layer is bound.

Internal:

• This member is internal (protected) and may be modified or removed in the future.

Source - tilemap/TilemapLayer.js, line 36

maxHealth :number

The Game Objects maximum health value. This works in combination with the heal method to ensure
the health value never exceeds the maximum.

Inherited From:

• Phaser.Component.Health#maxHealth

Default Value:

• 100

Source - gameobjects/components/Health.js, line 35

name :string

A user defined name given to this Game Object.
This value isn't ever used internally by Phaser, it is meant as a game level property.

Inherited From:

• Phaser.Component.Core#name

Source - gameobjects/components/Core.js, line 150

<readonly> offsetX :number

The amount the Game Object is visually offset from its x coordinate.
This is the same as width * anchor.x.
It will only be > 0 if anchor.x is not equal to zero.

Inherited From:

• Phaser.Component.Bounds#offsetX

Source - gameobjects/components/Bounds.js, line 24

<readonly> offsetY :number

The amount the Game Object is visually offset from its y coordinate.
This is the same as height * anchor.y.
It will only be > 0 if anchor.y is not equal to zero.

Inherited From:

• Phaser.Component.Bounds#offsetY

Source - gameobjects/components/Bounds.js, line 42

outOfBoundsKill :boolean

If this and the checkWorldBounds property are both set to true then the kill method is called as soon as inWorld returns false.

Inherited From:

• Phaser.Component.InWorld#outOfBoundsKill

Source - gameobjects/components/InWorld.js, line 106

outOfCameraBoundsKill :boolean

If this and the autoCull property are both set to true, then the kill method
is called as soon as the Game Object leaves the camera bounds.

Inherited From:

• Phaser.Component.InWorld#outOfCameraBoundsKill

Source - gameobjects/components/InWorld.js, line 115

pendingDestroy :boolean

A Game Object is that is pendingDestroy is flagged to have its destroy method called on the next logic update.
You can set it directly to allow you to flag an object to be destroyed on its next update.

This is extremely useful if you wish to destroy an object from within one of its own callbacks
such as with Buttons or other Input events.

Inherited From:

• Phaser.Component.Core#pendingDestroy

Source - gameobjects/components/Core.js, line 259

<readonly> physicsType :number

The const physics body type of this object.

Source - tilemap/TilemapLayer.js, line 83

<readonly> previousPosition :Phaser.Point

The position the Game Object was located in the previous frame.

Inherited From:

• Phaser.Component.Core#previousPosition

Source - gameobjects/components/Core.js, line 225

<readonly> previousRotation :number

The rotation the Game Object was in set to in the previous frame. Value is in radians.

Inherited From:

• Phaser.Component.Core#previousRotation

Source - gameobjects/components/Core.js, line 232

rayStepRate :integer

When ray-casting against tiles this is the number of steps it will jump. For larger tile sizes you can increase this to improve performance.

Default Value:

• 4

Source - tilemap/TilemapLayer.js, line 174

<readonly> renderOrderID :number

The render order ID is used internally by the renderer and Input Manager and should not be modified.
This property is mostly used internally by the renderers, but is exposed for the use of plugins.

Inherited From:

• Phaser.Component.Core#renderOrderID

Source - gameobjects/components/Core.js, line 240

renderSettings

Settings that control standard (non-diagnostic) rendering.

Properties:

Name	Type	Argument	Default	Description
enableScrollDelta	boolean	<optional>	true	Delta scroll rendering only draws tiles/edges as they come into view. This can greatly improve scrolling rendering performance, especially when there are many small tiles. It should only be disabled in rare cases.
copyCanvas	DOMCanvasElement	<optional> <nullable>	(auto)	[Internal] If set, force using a separate (shared) copy canvas. Using a canvas bitblt/copy when the source and destinations region overlap produces unexpected behavior in some browsers, notably Safari.

Default Value:

• {"enableScrollDelta":false,"overdrawRatio":0.2,"copyCanvas":null}

Source - tilemap/TilemapLayer.js, line 98

right :number

The right coordinate of the Game Object.
This is the same as x + width - offsetX.

Inherited From:

• Phaser.Component.Bounds#right

Source - gameobjects/components/Bounds.js, line 124

scaleMax :Phaser.Point

The maximum scale this Game Object will scale up to.

It allows you to prevent a parent from scaling this Game Object higher than the given value.

Set it to null to remove the limit.

Inherited From:

• Phaser.Component.ScaleMinMax#scaleMax

Source - gameobjects/components/ScaleMinMax.js, line 46

scaleMin :Phaser.Point

The minimum scale this Game Object will scale down to.

It allows you to prevent a parent from scaling this Game Object lower than the given value.

Set it to null to remove the limit.

Inherited From:

• Phaser.Component.ScaleMinMax#scaleMin

Source - gameobjects/components/ScaleMinMax.js, line 36

scrollFactorX :number

Speed at which this layer scrolls horizontally, relative to the camera (e.g. scrollFactorX of 0.5 scrolls half as quickly as the 'normal' camera-locked layers do).

Default Value:

• 1

Source - tilemap/TilemapLayer.js, line 152

scrollFactorY :number

Speed at which this layer scrolls vertically, relative to the camera (e.g. scrollFactorY of 0.5 scrolls half as quickly as the 'normal' camera-locked layers do)

Default Value:

• 1

Source - tilemap/TilemapLayer.js, line 160

setHealth

Sets the health property of the Game Object to the given amount.
Will never exceed the maxHealth value.

Inherited From:

• Phaser.Component.Health#setHealth

Source - gameobjects/components/Health.js, line 70

shader :PIXI.AbstractFilter

The shader that will be used to render this Sprite.
Set to null to remove a current shader.

Inherited From:

• PIXI.Sprite#shader

Default Value:

• null

Source - pixi/display/Sprite.js, line 93

smoothed :boolean

Enable or disable texture smoothing for this Game Object.

It only takes effect if the Game Object is using an image based texture.

Smoothing is enabled by default.

Inherited From:

• Phaser.Component.Smoothed#smoothed

Source - gameobjects/components/Smoothed.js, line 25

texture :PIXI.Texture

The texture that the sprite is using

Inherited From:

• PIXI.Sprite#texture

Source - pixi/display/Sprite.js, line 28

tint :Number

The tint applied to the sprite. This is a hex value. A value of 0xFFFFFF will remove any tint effect.

Inherited From:

• PIXI.Sprite#tint

Default Value:

• 0xFFFFFF

Source - pixi/display/Sprite.js, line 54

tintedTexture :Canvas

A canvas that contains the tinted version of the Sprite (in Canvas mode, WebGL doesn't populate this)

Inherited From:

• PIXI.Sprite#tintedTexture

Default Value:

• null

Source - pixi/display/Sprite.js, line 73

top :number

The y coordinate of the Game Object.
This is the same as y - offsetY.

Inherited From:

• Phaser.Component.Bounds#top

Source - gameobjects/components/Bounds.js, line 146

transformCallback :function

The callback that will apply any scale limiting to the worldTransform.

Inherited From:

• Phaser.Component.ScaleMinMax#transformCallback

Source - gameobjects/components/ScaleMinMax.js, line 20

transformCallbackContext :object

The context under which transformCallback is called.

Inherited From:

• Phaser.Component.ScaleMinMax#transformCallbackContext

Source - gameobjects/components/ScaleMinMax.js, line 26

<internal, readonly> type :number

The const type of this object.

Internal:

• This member is internal (protected) and may be modified or removed in the future.

Default Value:

• Phaser.TILEMAPLAYER

Source - tilemap/TilemapLayer.js, line 77

width :Number

The width of the sprite, setting this will actually modify the scale to achieve the value set

Inherited From:

• PIXI.Sprite#width

Source - pixi/display/Sprite.js, line 125

world :Phaser.Point

The world coordinates of this Game Object in pixels.
Depending on where in the display list this Game Object is placed this value can differ from position,
which contains the x/y coordinates relative to the Game Objects parent.

Inherited From:

• Phaser.Component.Core#world

Source - gameobjects/components/Core.js, line 211

x :number

The position of the Game Object on the x axis relative to the local coordinates of the parent.

Inherited From:

• Phaser.Component.PhysicsBody#x

Source - gameobjects/components/PhysicsBody.js, line 98

y :number

The position of the Game Object on the y axis relative to the local coordinates of the parent.

Inherited From:

• Phaser.Component.PhysicsBody#y

Source - gameobjects/components/PhysicsBody.js, line 124

<readonly> z :number

The z depth of this Game Object within its parent Group.
No two objects in a Group can have the same z value.
This value is adjusted automatically whenever the Group hierarchy changes.
If you wish to re-order the layering of a Game Object then see methods like Group.moveUp or Group.bringToTop.

Inherited From:

• Phaser.Component.Core#z

Source - gameobjects/components/Core.js, line 177

Methods

addChild(child) → {DisplayObject}

Adds a child to the container.

Parameters:

Name	Type	Description
child	DisplayObject	The DisplayObject to add to the container

Returns:

DisplayObject -

The child that was added.

Inherited From:

• PIXI.DisplayObjectContainer#addChild

Source - pixi/display/DisplayObjectContainer.js, line 42

addChildAt(child, index) → {DisplayObject}

Adds a child to the container at a specified index. If the index is out of bounds an error will be thrown

Parameters:

Name	Type	Description
child	DisplayObject	The child to add
index	Number	The index to place the child in

Returns:

DisplayObject -

The child that was added.

Inherited From:

• PIXI.DisplayObjectContainer#addChildAt

Source - pixi/display/DisplayObjectContainer.js, line 55

alignIn(container, position, offsetX, offsetY) → {Object}

Aligns this Game Object within another Game Object, or Rectangle, known as the
'container', to one of 9 possible positions.

The container must be a Game Object, or Phaser.Rectangle object. This can include properties
such as World.bounds or Camera.view, for aligning Game Objects within the world
and camera bounds. Or it can include other Sprites, Images, Text objects, BitmapText,
TileSprites or Buttons.

Please note that aligning a Sprite to another Game Object does not make it a child of
the container. It simply modifies its position coordinates so it aligns with it.

The position constants you can use are:

Phaser.TOP_LEFT, Phaser.TOP_CENTER, Phaser.TOP_RIGHT, Phaser.LEFT_CENTER,
Phaser.CENTER, Phaser.RIGHT_CENTER, Phaser.BOTTOM_LEFT,
Phaser.BOTTOM_CENTER and Phaser.BOTTOM_RIGHT.

The Game Objects are placed in such a way that their bounds align with the
container, taking into consideration rotation, scale and the anchor property.
This allows you to neatly align Game Objects, irrespective of their position value.

The optional offsetX and offsetY arguments allow you to apply extra spacing to the final
aligned position of the Game Object. For example:

sprite.alignIn(background, Phaser.BOTTOM_RIGHT, -20, -20)

Would align the sprite to the bottom-right, but moved 20 pixels in from the corner.
Think of the offsets as applying an adjustment to the containers bounds before the alignment takes place.
So providing a negative offset will 'shrink' the container bounds by that amount, and providing a positive
one expands it.

Parameters:

Name	Type	Argument	Default	Description
container	Phaser.Rectangle | Phaser.Sprite | Phaser.Image | Phaser.Text | Phaser.BitmapText | Phaser.Button | Phaser.Graphics | Phaser.TileSprite			The Game Object or Rectangle with which to align this Game Object to. Can also include properties such as World.bounds or Camera.view.
position	integer	<optional>		The position constant. One of Phaser.TOP_LEFT (default), Phaser.TOP_CENTER, Phaser.TOP_RIGHT, Phaser.LEFT_CENTER, Phaser.CENTER, Phaser.RIGHT_CENTER, Phaser.BOTTOM_LEFT, Phaser.BOTTOM_CENTER or Phaser.BOTTOM_RIGHT.
offsetX	integer	<optional>	0	A horizontal adjustment of the Containers bounds, applied to the aligned position of the Game Object. Use a negative value to shrink the bounds, positive to increase it.
offsetY	integer	<optional>	0	A vertical adjustment of the Containers bounds, applied to the aligned position of the Game Object. Use a negative value to shrink the bounds, positive to increase it.

Returns:

Object -

This Game Object.

Inherited From:

• Phaser.Component.Bounds#alignIn

Source - gameobjects/components/Bounds.js, line 223

alignTo(parent, position, offsetX, offsetY) → {Object}

Aligns this Game Object to the side of another Game Object, or Rectangle, known as the
'parent', in one of 11 possible positions.

The parent must be a Game Object, or Phaser.Rectangle object. This can include properties
such as World.bounds or Camera.view, for aligning Game Objects within the world
and camera bounds. Or it can include other Sprites, Images, Text objects, BitmapText,
TileSprites or Buttons.

Please note that aligning a Sprite to another Game Object does not make it a child of
the parent. It simply modifies its position coordinates so it aligns with it.

The position constants you can use are:

Phaser.TOP_LEFT (default), Phaser.TOP_CENTER, Phaser.TOP_RIGHT, Phaser.LEFT_TOP,
Phaser.LEFT_CENTER, Phaser.LEFT_BOTTOM, Phaser.RIGHT_TOP, Phaser.RIGHT_CENTER,
Phaser.RIGHT_BOTTOM, Phaser.BOTTOM_LEFT, Phaser.BOTTOM_CENTER
and Phaser.BOTTOM_RIGHT.

The Game Objects are placed in such a way that their bounds align with the
parent, taking into consideration rotation, scale and the anchor property.
This allows you to neatly align Game Objects, irrespective of their position value.

The optional offsetX and offsetY arguments allow you to apply extra spacing to the final
aligned position of the Game Object. For example:

sprite.alignTo(background, Phaser.BOTTOM_RIGHT, -20, -20)

Would align the sprite to the bottom-right, but moved 20 pixels in from the corner.
Think of the offsets as applying an adjustment to the parents bounds before the alignment takes place.
So providing a negative offset will 'shrink' the parent bounds by that amount, and providing a positive
one expands it.

Parameters:

Name	Type	Argument	Default	Description
parent	Phaser.Rectangle | Phaser.Sprite | Phaser.Image | Phaser.Text | Phaser.BitmapText | Phaser.Button | Phaser.Graphics | Phaser.TileSprite			The Game Object or Rectangle with which to align this Game Object to. Can also include properties such as World.bounds or Camera.view.
position	integer	<optional>		The position constant. One of Phaser.TOP_LEFT, Phaser.TOP_CENTER, Phaser.TOP_RIGHT, Phaser.LEFT_TOP, Phaser.LEFT_CENTER, Phaser.LEFT_BOTTOM, Phaser.RIGHT_TOP, Phaser.RIGHT_CENTER, Phaser.RIGHT_BOTTOM, Phaser.BOTTOM_LEFT, Phaser.BOTTOM_CENTER or Phaser.BOTTOM_RIGHT.
offsetX	integer	<optional>	0	A horizontal adjustment of the Containers bounds, applied to the aligned position of the Game Object. Use a negative value to shrink the bounds, positive to increase it.
offsetY	integer	<optional>	0	A vertical adjustment of the Containers bounds, applied to the aligned position of the Game Object. Use a negative value to shrink the bounds, positive to increase it.

Returns:

Object -

This Game Object.

Inherited From:

• Phaser.Component.Bounds#alignTo

Source - gameobjects/components/Bounds.js, line 321

bringToTop() → {PIXI.DisplayObject}

Brings this Game Object to the top of its parents display list.
Visually this means it will render over the top of any old child in the same Group.

If this Game Object hasn't been added to a custom Group then this method will bring it to the top of the Game World,
because the World is the root Group from which all Game Objects descend.

Returns:

PIXI.DisplayObject -

This instance.

Inherited From:

• Phaser.Component.BringToTop#bringToTop

Source - gameobjects/components/BringToTop.js, line 24

contains(child) → {Boolean}

Determines whether the specified display object is a child of the DisplayObjectContainer instance or the instance itself.

Parameters:

Name	Type	Description
child	DisplayObject	-

Returns:

Boolean -

Inherited From:

• PIXI.DisplayObjectContainer#contains

Source - pixi/display/DisplayObjectContainer.js, line 449

crop(rect, copy)

Crop allows you to crop the texture being used to display this Game Object.
Setting a crop rectangle modifies the core texture frame. The Game Object width and height properties will be adjusted accordingly.

Cropping takes place from the top-left and can be modified in real-time either by providing an updated rectangle object to this method,
or by modifying cropRect property directly and then calling updateCrop.

The rectangle object given to this method can be either a Phaser.Rectangle or any other object
so long as it has public x, y, width, height, right and bottom properties.

A reference to the rectangle is stored in cropRect unless the copy parameter is true,
in which case the values are duplicated to a local object.

Parameters:

Name	Type	Argument	Default	Description
rect	Phaser.Rectangle			The Rectangle used during cropping. Pass null or no parameters to clear a previously set crop rectangle.
copy	boolean	<optional>	false	If false cropRect will be stored as a reference to the given rect. If true it will copy the rect values into a local Phaser Rectangle object stored in cropRect.

Inherited From:

• Phaser.Component.Crop#crop

Source - gameobjects/components/Crop.js, line 49

destroy()

Destroys this TilemapLayer.

Source - tilemap/TilemapLayer.js, line 351

<internal> ensureSharedCopyCanvas()

Create if needed (and return) a shared copy canvas that is shared across all TilemapLayers.

Code that uses the canvas is responsible to ensure the dimensions and save/restore state as appropriate.

Internal:

• This member is internal (protected) and may be modified or removed in the future.

Source - tilemap/TilemapLayer.js, line 253

getBounds(matrix) → {Rectangle}

Returns the bounds of the Sprite as a rectangle.
The bounds calculation takes the worldTransform into account.

It is important to note that the transform is not updated when you call this method.
So if this Sprite is the child of a Display Object which has had its transform
updated since the last render pass, those changes will not yet have been applied
to this Sprites worldTransform. If you need to ensure that all parent transforms
are factored into this getBounds operation then you should call updateTransform
on the root most object in this Sprites display list first.

Parameters:

Name	Type	Description
matrix	Matrix	the transformation matrix of the sprite

Returns:

Rectangle -

the framing rectangle

Inherited From:

• PIXI.Sprite#getBounds

Source - pixi/display/Sprite.js, line 199

getChildAt(index) → {DisplayObject}

Returns the child at the specified index

Parameters:

Name	Type	Description
index	Number	The index to get the child from

Returns:

DisplayObject -

The child at the given index, if any.

Inherited From:

• PIXI.DisplayObjectContainer#getChildAt

Source - pixi/display/DisplayObjectContainer.js, line 153

getChildIndex(child) → {Number}

Returns the index position of a child DisplayObject instance

Parameters:

Name	Type	Description
child	DisplayObject	The DisplayObject instance to identify

Returns:

Number -

The index position of the child display object to identify

Inherited From:

• PIXI.DisplayObjectContainer#getChildIndex

Source - pixi/display/DisplayObjectContainer.js, line 112

getLocalBounds() → {Rectangle}

Retrieves the non-global local bounds of the Sprite as a rectangle. The calculation takes all visible children into consideration.

Returns:

Rectangle -

The rectangular bounding area

Inherited From:

• PIXI.Sprite#getLocalBounds

Source - pixi/display/Sprite.js, line 315

getRayCastTiles(line, stepRate, collides, interestingFace) → {Array.<Phaser.Tile>}

Gets all tiles that intersect with the given line.

Parameters:

Name	Type	Argument	Default	Description
line	Phaser.Line			The line used to determine which tiles to return.
stepRate	integer	<optional>	(rayStepRate)	How many steps through the ray will we check? Defaults to rayStepRate.
collides	boolean	<optional>	false	If true, only return tiles that collide on one or more faces.
interestingFace	boolean	<optional>	false	If true, only return tiles that have interesting faces.

Returns:

Array.<Phaser.Tile> -

An array of Phaser.Tiles.

Source - tilemap/TilemapLayer.js, line 551

getTiles(x, y, width, height, collides, interestingFace) → {array.<Phaser.Tile>}

Get all tiles that exist within the given area, defined by the top-left corner, width and height. Values given are in pixels, not tiles.

Parameters:

Name	Type	Argument	Default	Description
x	number			X position of the top left corner (in pixels).
y	number			Y position of the top left corner (in pixels).
width	number			Width of the area to get (in pixels).
height	number			Height of the area to get (in pixels).
collides	boolean	<optional>	false	If true, only return tiles that collide on one or more faces.
interestingFace	boolean	<optional>	false	If true, only return tiles that have interesting faces.

Returns:

array.<Phaser.Tile> -

An array of Tiles.

Source - tilemap/TilemapLayer.js, line 598

getTileX(x) → {integer}

Convert a pixel value to a tile coordinate.

Parameters:

Name	Type	Description
x	number	X position of the point in target tile (in pixels).

Returns:

integer -

The X map location of the tile.

Source - tilemap/TilemapLayer.js, line 502

getTileXY(x, y, point) → {Phaser.Point|object}

Convert a pixel coordinate to a tile coordinate.

Parameters:

Name	Type	Description
x	number	X position of the point in target tile (in pixels).
y	number	Y position of the point in target tile (in pixels).
point	Phaser.Point | object	The Point/object to update.

Returns:

Phaser.Point | object -

A Point/object with its x and y properties set.

Source - tilemap/TilemapLayer.js, line 532

getTileY(y) → {integer}

Convert a pixel value to a tile coordinate.

Parameters:

Name	Type	Description
y	number	Y position of the point in target tile (in pixels).

Returns:

integer -

The Y map location of the tile.

Source - tilemap/TilemapLayer.js, line 517

kill() → {PIXI.DisplayObject}

Kills a Game Object. A killed Game Object has its alive, exists and visible properties all set to false.

It will dispatch the onKilled event. You can listen to events.onKilled for the signal.

Note that killing a Game Object is a way for you to quickly recycle it in an object pool,
it doesn't destroy the object or free it up from memory.

If you don't need this Game Object any more you should call destroy instead.

Returns:

PIXI.DisplayObject -

This instance.

Inherited From:

• Phaser.Component.LifeSpan#kill

Source - gameobjects/components/LifeSpan.js, line 113

loadTexture(key, frame, stopAnimation)

Changes the base texture the Game Object is using. The old texture is removed and the new one is referenced or fetched from the Cache.

If your Game Object is using a frame from a texture atlas and you just wish to change to another frame, then see the frame or frameName properties instead.

You should only use loadTexture if you want to replace the base texture entirely.

Calling this method causes a WebGL texture update, so use sparingly or in low-intensity portions of your game, or if you know the new texture is already on the GPU.

You can use the new const Phaser.PENDING_ATLAS as the texture key for any sprite.
Doing this then sets the key to be the frame argument (the frame is set to zero).

This allows you to create sprites using load.image during development, and then change them
to use a Texture Atlas later in development by simply searching your code for 'PENDING_ATLAS'
and swapping it to be the key of the atlas data.

Note: You cannot use a RenderTexture as a texture for a TileSprite.

Parameters:

Name	Type	Argument	Default	Description
key	string | Phaser.RenderTexture | Phaser.BitmapData | Phaser.Video | PIXI.Texture			This is the image or texture used by the Sprite during rendering. It can be a string which is a reference to the Cache Image entry, or an instance of a RenderTexture, BitmapData, Video or PIXI.Texture.
frame	string | number	<optional>		If this Sprite is using part of a sprite sheet or texture atlas you can specify the exact frame to use by giving a string or numeric index.
stopAnimation	boolean	<optional>	true	If an animation is already playing on this Sprite you can choose to stop it or let it carry on playing.

Inherited From:

• Phaser.Component.LoadTexture#loadTexture

Source - gameobjects/components/LoadTexture.js, line 51

moveDown() → {PIXI.DisplayObject}

Moves this Game Object down one place in its parents display list.
This call has no effect if the Game Object is already at the bottom of the display list.

If this Game Object hasn't been added to a custom Group then this method will move it one object down within the Game World,
because the World is the root Group from which all Game Objects descend.

Returns:

PIXI.DisplayObject -

This instance.

Inherited From:

• Phaser.Component.BringToTop#moveDown

Source - gameobjects/components/BringToTop.js, line 87

moveUp() → {PIXI.DisplayObject}

Moves this Game Object up one place in its parents display list.
This call has no effect if the Game Object is already at the top of the display list.

If this Game Object hasn't been added to a custom Group then this method will move it one object up within the Game World,
because the World is the root Group from which all Game Objects descend.

Returns:

PIXI.DisplayObject -

This instance.

Inherited From:

• Phaser.Component.BringToTop#moveUp

Source - gameobjects/components/BringToTop.js, line 66

overlap(displayObject) → {boolean}

Checks to see if the bounds of this Game Object overlaps with the bounds of the given Display Object,
which can be a Sprite, Image, TileSprite or anything that extends those such as Button or provides a getBounds method and result.

This check ignores the hitArea property if set and runs a getBounds comparison on both objects to determine the result.

Therefore it's relatively expensive to use in large quantities, i.e. with lots of Sprites at a high frequency.
It should be fine for low-volume testing where physics isn't required.

Parameters:

Name	Type	Description
displayObject	Phaser.Sprite | Phaser.Image | Phaser.TileSprite | Phaser.Button | PIXI.DisplayObject	The display object to check against.

Returns:

boolean -

True if the bounds of this Game Object intersects at any point with the bounds of the given display object.

Inherited From:

• Phaser.Component.Overlap#overlap

Source - gameobjects/components/Overlap.js, line 29

play(name, frameRate, loop, killOnComplete) → {Phaser.Animation}

Plays an Animation.

The animation should have previously been created via animations.add.

If the animation is already playing calling this again won't do anything.
If you need to reset an already running animation do so directly on the Animation object itself or via AnimationManager.stop.

Parameters:

Name	Type	Argument	Default	Description
name	string			The name of the animation to be played, e.g. "fire", "walk", "jump". Must have been previously created via 'AnimationManager.add'.
frameRate	number	<optional>	null	The framerate to play the animation at. The speed is given in frames per second. If not provided the previously set frameRate of the Animation is used.
loop	boolean	<optional>	false	Should the animation be looped after playback. If not provided the previously set loop value of the Animation is used.
killOnComplete	boolean	<optional>	false	If set to true when the animation completes (only happens if loop=false) the parent Sprite will be killed.

Returns:

Phaser.Animation -

A reference to playing Animation.

Inherited From:

• Phaser.Component.Animation#play

Source - gameobjects/components/Animation.js, line 31

<internal> postUpdate()

Automatically called by World.postUpdate. Handles cache updates.

Internal:

• This member is internal (protected) and may be modified or removed in the future.

Source - tilemap/TilemapLayer.js, line 284

preUpdate()

Automatically called by World.preUpdate.

Source - tilemap/TilemapLayer.js, line 273

removeChild(child) → {DisplayObject}

Removes a child from the container.

Parameters:

Name	Type	Description
child	DisplayObject	The DisplayObject to remove

Returns:

DisplayObject -

The child that was removed.

Inherited From:

• PIXI.DisplayObjectContainer#removeChild

Source - pixi/display/DisplayObjectContainer.js, line 171

removeChildAt(index) → {DisplayObject}

Removes a child from the specified index position.

Parameters:

Name	Type	Description
index	Number	The index to get the child from

Returns:

DisplayObject -

The child that was removed.

Inherited From:

• PIXI.DisplayObjectContainer#removeChildAt

Source - pixi/display/DisplayObjectContainer.js, line 191

removeChildren(beginIndex, endIndex)

Removes all children from this container that are within the begin and end indexes.

Parameters:

Name	Type	Description
beginIndex	Number	The beginning position. Default value is 0.
endIndex	Number	The ending position. Default value is size of the container.

Inherited From:

• PIXI.DisplayObjectContainer#removeChildren

Source - pixi/display/DisplayObjectContainer.js, line 213

<internal> render()

Renders the tiles to the layer canvas and pushes to the display.

Internal:

• This member is internal (protected) and may be modified or removed in the future.

Source - tilemap/TilemapLayer.js, line 1045

reset(x, y, health) → {PIXI.DisplayObject}

Resets the Game Object.

This moves the Game Object to the given x/y world coordinates and sets fresh, exists,
visible and renderable to true.

If this Game Object has the LifeSpan component it will also set alive to true and health to the given value.

If this Game Object has a Physics Body it will reset the Body.

Parameters:

Name	Type	Argument	Default	Description
x	number			The x coordinate (in world space) to position the Game Object at.
y	number			The y coordinate (in world space) to position the Game Object at.
health	number	<optional>	1	The health to give the Game Object if it has the Health component.

Returns:

PIXI.DisplayObject -

This instance.

Inherited From:

• Phaser.Component.Reset#reset

Source - gameobjects/components/Reset.js, line 30

resetFrame()

Resets the texture frame dimensions that the Game Object uses for rendering.

Inherited From:

• Phaser.Component.LoadTexture#resetFrame

Source - gameobjects/components/LoadTexture.js, line 232

resetTilesetCache()

The TilemapLayer caches tileset look-ups.

Call this method of clear the cache if tilesets have been added or updated after the layer has been rendered.

Source - tilemap/TilemapLayer.js, line 693

resize(width, height)

Resizes the internal canvas and texture frame used by this TilemapLayer.

This is an expensive call, so don't bind it to a window resize event! But instead call it at carefully
selected times.

Be aware that no validation of the new sizes takes place and the current map scroll coordinates are not
modified either. You will have to handle both of these things from your game code if required.

Parameters:

Name	Type	Description
width	number	The new width of the TilemapLayer
height	number	The new height of the TilemapLayer

Source - tilemap/TilemapLayer.js, line 364

resizeFrame(parent, width, height)

Resizes the Frame dimensions that the Game Object uses for rendering.

You shouldn't normally need to ever call this, but in the case of special texture types such as Video or BitmapData
it can be useful to adjust the dimensions directly in this way.

Parameters:

Name	Type	Description
parent	object	The parent texture object that caused the resize, i.e. a Phaser.Video object.
width	integer	The new width of the texture.
height	integer	The new height of the texture.

Inherited From:

• Phaser.Component.LoadTexture#resizeFrame

Source - gameobjects/components/LoadTexture.js, line 220

resizeWorld()

Sets the world size to match the size of this layer.

Source - tilemap/TilemapLayer.js, line 402

revive(health) → {PIXI.DisplayObject}

Brings a 'dead' Game Object back to life, optionally resetting its health value in the process.

A resurrected Game Object has its alive, exists and visible properties all set to true.

It will dispatch the onRevived event. Listen to events.onRevived for the signal.

Parameters:

Name	Type	Argument	Default	Description
health	number	<optional>	100	The health to give the Game Object. Only set if the GameObject has the Health component.

Returns:

PIXI.DisplayObject -

This instance.

Inherited From:

• Phaser.Component.LifeSpan#revive

Source - gameobjects/components/LifeSpan.js, line 78

sendToBack() → {PIXI.DisplayObject}

Sends this Game Object to the bottom of its parents display list.
Visually this means it will render below all other children in the same Group.

If this Game Object hasn't been added to a custom Group then this method will send it to the bottom of the Game World,
because the World is the root Group from which all Game Objects descend.

Returns:

PIXI.DisplayObject -

This instance.

Inherited From:

• Phaser.Component.BringToTop#sendToBack

Source - gameobjects/components/BringToTop.js, line 45

setChildIndex(child, index)

Changes the position of an existing child in the display object container

Parameters:

Name	Type	Description
child	DisplayObject	The child DisplayObject instance for which you want to change the index number
index	Number	The resulting index number for the child display object

Inherited From:

• PIXI.DisplayObjectContainer#setChildIndex

Source - pixi/display/DisplayObjectContainer.js, line 132

setFrame(frame)

Sets the texture frame the Game Object uses for rendering.

This is primarily an internal method used by loadTexture, but is exposed for the use of plugins and custom classes.

Parameters:

Name	Type	Description
frame	Phaser.Frame	The Frame to be used by the texture.

Inherited From:

• Phaser.Component.LoadTexture#setFrame

Source - gameobjects/components/LoadTexture.js, line 155

setScale(xScale, yScale)

This method will set the scale of the tilemap as well as update the underlying block data of this layer.

Parameters:

Name	Type	Argument	Default	Description
xScale	number	<optional>	1	The scale factor along the X-plane
yScale	number	<optional>		The scale factor along the Y-plane

Source - tilemap/TilemapLayer.js, line 712

setScaleMinMax(minX, minY, maxX, maxY)

Sets the scaleMin and scaleMax values. These values are used to limit how far this Game Object will scale based on its parent.

For example if this Game Object has a minScale value of 1 and its parent has a scale value of 0.5, the 0.5 will be ignored
and the scale value of 1 will be used, as the parents scale is lower than the minimum scale this Game Object should adhere to.

By setting these values you can carefully control how Game Objects deal with responsive scaling.

If only one parameter is given then that value will be used for both scaleMin and scaleMax:
setScaleMinMax(1) = scaleMin.x, scaleMin.y, scaleMax.x and scaleMax.y all = 1

If only two parameters are given the first is set as scaleMin.x and y and the second as scaleMax.x and y:
setScaleMinMax(0.5, 2) = scaleMin.x and y = 0.5 and scaleMax.x and y = 2

If you wish to set scaleMin with different values for x and y then either modify Game Object.scaleMin directly,
or pass null for the maxX and maxY parameters.

Call setScaleMinMax(null) to clear all previously set values.

Parameters:

Name	Type	Description
minX	number | null	The minimum horizontal scale value this Game Object can scale down to.
minY	number | null	The minimum vertical scale value this Game Object can scale down to.
maxX	number | null	The maximum horizontal scale value this Game Object can scale up to.
maxY	number | null	The maximum vertical scale value this Game Object can scale up to.

Inherited From:

• Phaser.Component.ScaleMinMax#setScaleMinMax

Source - gameobjects/components/ScaleMinMax.js, line 110

setTexture(texture, destroy)

Sets the texture of the sprite. Be warned that this doesn't remove or destroy the previous
texture this Sprite was using.

Parameters:

Name	Type	Argument	Default	Description
texture	PIXI.Texture			The PIXI texture that is displayed by the sprite
destroy	Boolean	<optional>	false	Call Texture.destroy on the current texture before replacing it with the new one?

Inherited From:

• PIXI.Sprite#setTexture

Source - pixi/display/Sprite.js, line 163

swapChildren(child, child2)

Swaps the position of 2 Display Objects within this container.

Parameters:

Name	Type	Description
child	DisplayObject	-
child2	DisplayObject	-

Inherited From:

• PIXI.DisplayObjectContainer#swapChildren

Source - pixi/display/DisplayObjectContainer.js, line 85

update()

Override this method in your own custom objects to handle any update requirements.
It is called immediately after preUpdate and before postUpdate.
Remember if this Game Object has any children you should call update on those too.

Inherited From:

• Phaser.Component.Core#update

Source - gameobjects/components/Core.js, line 328

updateCrop()

If you have set a crop rectangle on this Game Object via crop and since modified the cropRect property,
or the rectangle it references, then you need to update the crop frame by calling this method.

Inherited From:

• Phaser.Component.Crop#updateCrop

Source - gameobjects/components/Crop.js, line 86