The LTE Radio Resource Control entity at the eNB. More...
#include "lte-enb-rrc.h"
Classes | |
struct | X2uTeidInfo |
X2uTeidInfo structure. More... | |
Public Types | |
typedef void(* | ConnectionHandoverTracedCallback) (const uint64_t imsi, const uint16_t cellId, const uint16_t rnti) |
TracedCallback signature for connection and handover end events. More... | |
typedef void(* | HandoverStartTracedCallback) (const uint64_t imsi, const uint16_t cellId, const uint16_t rnti, const uint16_t targetCid) |
TracedCallback signature for handover start events. More... | |
enum | LteEpsBearerToRlcMapping_t { RLC_SM_ALWAYS = 1, RLC_UM_ALWAYS = 2, RLC_AM_ALWAYS = 3, PER_BASED = 4 } |
Identifies how EPS Bearer parameters are mapped to different RLC types. More... | |
typedef void(* | NewUeContextTracedCallback) (const uint16_t cellId, const uint16_t rnti) |
TracedCallback signature for new Ue Context events. More... | |
typedef void(* | ReceiveReportTracedCallback) (const uint64_t imsi, const uint16_t cellId, const uint16_t rnti, const LteRrcSap::MeasurementReport report) |
TracedCallback signature for receive measurement report events. More... | |
Public Member Functions | |
LteEnbRrc () | |
create an RRC instance for use within an eNB More... | |
virtual | ~LteEnbRrc () |
Destructor. More... | |
uint8_t | AddUeMeasReportConfig (LteRrcSap::ReportConfigEutra config) |
Add a new UE measurement reporting configuration. More... | |
void | AddX2Neighbour (uint16_t cellId) |
Add a neighbour with an X2 interface. More... | |
uint8_t | CellToComponentCarrierId (uint16_t cellId) |
convert the cell id to component carrier id More... | |
uint16_t | ComponentCarrierToCellId (uint8_t componentCarrierId) |
convert the component carrier id to cell id More... | |
void | ConfigureCarriers (std::map< uint8_t, Ptr< ComponentCarrierEnb >> ccPhyConf) |
Configure carriers. More... | |
void | ConfigureCell (std::map< uint8_t, Ptr< ComponentCarrierEnb >> ccPhyConf) |
Configure cell-specific parameters. More... | |
void | ConnectionRejectedTimeout (uint16_t rnti) |
Method triggered a while after sending RRC Connection Rejected. More... | |
void | ConnectionRequestTimeout (uint16_t rnti) |
Method triggered when a UE is expected to request for connection but does not do so in a reasonable time. More... | |
void | ConnectionSetupTimeout (uint16_t rnti) |
Method triggered when a UE is expected to complete a connection setup procedure but does not do so in a reasonable time. More... | |
void | DoSendReleaseDataRadioBearer (uint64_t imsi, uint16_t rnti, uint8_t bearerId) |
This function acts as an interface to trigger Release indication messages towards eNB and EPC. More... | |
EpcX2SapUser * | GetEpcX2SapUser () |
Get the X2 SAP offered by this RRC. More... | |
LteAnrSapUser * | GetLteAnrSapUser () |
Get the ANR SAP offered by this RRC. More... | |
LteCcmRrcSapUser * | GetLteCcmRrcSapUser () |
Get the Component Carrier Management SAP offered by this RRC. More... | |
LteEnbCmacSapUser * | GetLteEnbCmacSapUser () |
Get the CMAC SAP offered by this RRC. More... | |
LteEnbCmacSapUser * | GetLteEnbCmacSapUser (uint8_t pos) |
Get the CMAC SAP offered by this RRC. More... | |
LteEnbCphySapUser * | GetLteEnbCphySapUser () |
LteEnbCphySapUser * | GetLteEnbCphySapUser (uint8_t pos) |
Get the ENB CPhy SAP user. More... | |
LteEnbRrcSapProvider * | GetLteEnbRrcSapProvider () |
LteFfrRrcSapUser * | GetLteFfrRrcSapUser () |
Get the FFR SAP offered by this RRC. More... | |
LteFfrRrcSapUser * | GetLteFfrRrcSapUser (uint8_t index) |
Get the FFR SAP offered by this RRC. More... | |
LteHandoverManagementSapUser * | GetLteHandoverManagementSapUser () |
Get the Handover Management SAP offered by this RRC. More... | |
EpcEnbS1SapUser * | GetS1SapUser () |
uint32_t | GetSrsPeriodicity () const |
Ptr< UeManager > | GetUeManager (uint16_t rnti) |
void | HandoverJoiningTimeout (uint16_t rnti) |
Method triggered when a UE is expected to join the cell for a handover but does not do so in a reasonable time. More... | |
void | HandoverLeavingTimeout (uint16_t rnti) |
Method triggered when a UE is expected to leave a cell for a handover but no feedback is received in a reasonable time. More... | |
bool | HasUeManager (uint16_t rnti) const |
bool | SendData (Ptr< Packet > p) |
Enqueue an IP data packet on the proper bearer for downlink transmission. More... | |
void | SendHandoverRequest (uint16_t rnti, uint16_t cellId) |
Send a HandoverRequest through the X2 SAP interface. More... | |
void | SetCellId (uint16_t m_cellId) |
set the cell id of this eNB More... | |
void | SetCellId (uint16_t m_cellId, uint8_t ccIndex) |
set the cell id of this eNB More... | |
void | SetCsgId (uint32_t csgId, bool csgIndication) |
Associate this RRC entity with a particular CSG information. More... | |
void | SetEpcX2SapProvider (EpcX2SapProvider *s) |
Set the X2 SAP this RRC should interact with. More... | |
void | SetForwardUpCallback (Callback< void, Ptr< Packet > > cb) |
set the callback used to forward data packets up the stack More... | |
void | SetLteAnrSapProvider (LteAnrSapProvider *s) |
set the ANR SAP this RRC should interact with More... | |
void | SetLteCcmRrcSapProvider (LteCcmRrcSapProvider *s) |
set the Component Carrier Management SAP this RRC should interact with More... | |
void | SetLteEnbCmacSapProvider (LteEnbCmacSapProvider *s) |
set the CMAC SAP this RRC should interact with More... | |
void | SetLteEnbCmacSapProvider (LteEnbCmacSapProvider *s, uint8_t pos) |
set the CMAC SAP this RRC should interact with More... | |
void | SetLteEnbCphySapProvider (LteEnbCphySapProvider *s) |
set the CPHY SAP this RRC should use to interact with the PHY More... | |
void | SetLteEnbCphySapProvider (LteEnbCphySapProvider *s, uint8_t pos) |
set the CPHY SAP this RRC should use to interact with the PHY More... | |
void | SetLteEnbRrcSapUser (LteEnbRrcSapUser *s) |
set the RRC SAP this RRC should interact with More... | |
void | SetLteFfrRrcSapProvider (LteFfrRrcSapProvider *s) |
set the FFR SAP this RRC should interact with More... | |
void | SetLteFfrRrcSapProvider (LteFfrRrcSapProvider *s, uint8_t index) |
set the FFR SAP this RRC should interact with More... | |
void | SetLteHandoverManagementSapProvider (LteHandoverManagementSapProvider *s) |
set the Handover Management SAP this RRC should interact with More... | |
void | SetLteMacSapProvider (LteMacSapProvider *s) |
set the MAC SAP provider. More... | |
void | SetNumberOfComponentCarriers (uint16_t numberOfComponentCarriers) |
Set number of component carriers. More... | |
void | SetS1SapProvider (EpcEnbS1SapProvider *s) |
Set the S1 SAP Provider. More... | |
void | SetSrsPeriodicity (uint32_t p) |
Public Member Functions inherited from ns3::Object | |
Object () | |
Constructor. More... | |
virtual | ~Object () |
Destructor. More... | |
void | AggregateObject (Ptr< Object > other) |
Aggregate two Objects together. More... | |
void | Dispose (void) |
Dispose of this Object. More... | |
AggregateIterator | GetAggregateIterator (void) const |
Get an iterator to the Objects aggregated to this one. More... | |
virtual TypeId | GetInstanceTypeId (void) const |
Get the most derived TypeId for this Object. More... | |
template<typename T > | |
Ptr< T > | GetObject (void) const |
Get a pointer to the requested aggregated Object. More... | |
template<typename T > | |
Ptr< T > | GetObject (TypeId tid) const |
Get a pointer to the requested aggregated Object by TypeId. More... | |
void | Initialize (void) |
Invoke DoInitialize on all Objects aggregated to this one. More... | |
bool | IsInitialized (void) const |
Check if the object has been initialized. More... | |
Public Member Functions inherited from ns3::SimpleRefCount< Object, ObjectBase, ObjectDeleter > | |
SimpleRefCount () | |
Default constructor. More... | |
SimpleRefCount (const SimpleRefCount &o) | |
Copy constructor. More... | |
uint32_t | GetReferenceCount (void) const |
Get the reference count of the object. More... | |
SimpleRefCount & | operator= (const SimpleRefCount &o) |
Assignment operator. More... | |
void | Ref (void) const |
Increment the reference count. More... | |
void | Unref (void) const |
Decrement the reference count. More... | |
Public Member Functions inherited from ns3::ObjectBase | |
virtual | ~ObjectBase () |
Virtual destructor. More... | |
void | GetAttribute (std::string name, AttributeValue &value) const |
Get the value of an attribute, raising fatal errors if unsuccessful. More... | |
bool | GetAttributeFailSafe (std::string name, AttributeValue &value) const |
Get the value of an attribute without raising erros. More... | |
void | SetAttribute (std::string name, const AttributeValue &value) |
Set a single attribute, raising fatal errors if unsuccessful. More... | |
bool | SetAttributeFailSafe (std::string name, const AttributeValue &value) |
Set a single attribute without raising errors. More... | |
bool | TraceConnect (std::string name, std::string context, const CallbackBase &cb) |
Connect a TraceSource to a Callback with a context. More... | |
bool | TraceConnectWithoutContext (std::string name, const CallbackBase &cb) |
Connect a TraceSource to a Callback without a context. More... | |
bool | TraceDisconnect (std::string name, std::string context, const CallbackBase &cb) |
Disconnect from a TraceSource a Callback previously connected with a context. More... | |
bool | TraceDisconnectWithoutContext (std::string name, const CallbackBase &cb) |
Disconnect from a TraceSource a Callback previously connected without a context. More... | |
Static Public Member Functions | |
static TypeId | GetTypeId (void) |
Get the type ID. More... | |
Static Public Member Functions inherited from ns3::Object | |
static TypeId | GetTypeId (void) |
Register this type. More... | |
Static Public Member Functions inherited from ns3::ObjectBase | |
static TypeId | GetTypeId (void) |
Get the type ID. More... | |
Protected Member Functions | |
virtual void | DoDispose (void) |
Destructor implementation. More... | |
Protected Member Functions inherited from ns3::Object | |
Object (const Object &o) | |
Copy an Object. More... | |
virtual void | DoInitialize (void) |
Initialize() implementation. More... | |
virtual void | NotifyNewAggregate (void) |
Notify all Objects aggregated to this one of a new Object being aggregated. More... | |
Protected Member Functions inherited from ns3::ObjectBase | |
void | ConstructSelf (const AttributeConstructionList &attributes) |
Complete construction of ObjectBase; invoked by derived classes. More... | |
virtual void | NotifyConstructionCompleted (void) |
Notifier called once the ObjectBase is fully constructed. More... | |
Private Member Functions | |
uint16_t | AddUe (UeManager::State state, uint8_t componentCarrierId) |
Allocate a new RNTI for a new UE. More... | |
uint8_t | DoAddUeMeasReportConfigForAnr (LteRrcSap::ReportConfigEutra reportConfig) |
Add UE measure report config for ANR function. More... | |
uint8_t | DoAddUeMeasReportConfigForComponentCarrier (LteRrcSap::ReportConfigEutra reportConfig) |
Add UE measure report config for component carrier function. More... | |
uint8_t | DoAddUeMeasReportConfigForFfr (LteRrcSap::ReportConfigEutra reportConfig) |
Add UE measure report config for FFR function. More... | |
uint8_t | DoAddUeMeasReportConfigForHandover (LteRrcSap::ReportConfigEutra reportConfig) |
Add UE measure report config for handover function. More... | |
uint16_t | DoAllocateTemporaryCellRnti (uint8_t componentCarrierId) |
Allocate temporary cell RNTI function. More... | |
void | DoCompleteSetupUe (uint16_t rnti, LteEnbRrcSapProvider::CompleteSetupUeParameters params) |
Part of the RRC protocol. More... | |
void | DoDataRadioBearerSetupRequest (EpcEnbS1SapUser::DataRadioBearerSetupRequestParameters params) |
Data radio beaerer setup request function. More... | |
void | DoNotifyLcConfigResult (uint16_t rnti, uint8_t lcid, bool success) |
Notify LC config result function. More... | |
void | DoPathSwitchRequestAcknowledge (EpcEnbS1SapUser::PathSwitchRequestAcknowledgeParameters params) |
Path switch request acknowledge function. More... | |
void | DoRecvHandoverPreparationFailure (EpcX2SapUser::HandoverPreparationFailureParams params) |
Receive handover preparation failure function. More... | |
void | DoRecvHandoverRequest (EpcX2SapUser::HandoverRequestParams params) |
Receive handover request function. More... | |
void | DoRecvHandoverRequestAck (EpcX2SapUser::HandoverRequestAckParams params) |
Receive handover request acknowledge function. More... | |
void | DoRecvLoadInformation (EpcX2SapUser::LoadInformationParams params) |
Receive load information function. More... | |
void | DoRecvMeasurementReport (uint16_t rnti, LteRrcSap::MeasurementReport msg) |
Part of the RRC protocol. More... | |
void | DoRecvResourceStatusUpdate (EpcX2SapUser::ResourceStatusUpdateParams params) |
Receive resource status update function. More... | |
void | DoRecvRrcConnectionReconfigurationCompleted (uint16_t rnti, LteRrcSap::RrcConnectionReconfigurationCompleted msg) |
Part of the RRC protocol. More... | |
void | DoRecvRrcConnectionReestablishmentComplete (uint16_t rnti, LteRrcSap::RrcConnectionReestablishmentComplete msg) |
Part of the RRC protocol. More... | |
void | DoRecvRrcConnectionReestablishmentRequest (uint16_t rnti, LteRrcSap::RrcConnectionReestablishmentRequest msg) |
Part of the RRC protocol. More... | |
void | DoRecvRrcConnectionRequest (uint16_t rnti, LteRrcSap::RrcConnectionRequest msg) |
Part of the RRC protocol. More... | |
void | DoRecvRrcConnectionSetupCompleted (uint16_t rnti, LteRrcSap::RrcConnectionSetupCompleted msg) |
Part of the RRC protocol. More... | |
void | DoRecvSnStatusTransfer (EpcX2SapUser::SnStatusTransferParams params) |
Receive SN status transfer function. More... | |
void | DoRecvUeContextRelease (EpcX2SapUser::UeContextReleaseParams params) |
Receive UE context release function. More... | |
void | DoRecvUeData (EpcX2SapUser::UeDataParams params) |
Receive UE data function. More... | |
void | DoRrcConfigurationUpdateInd (LteEnbCmacSapUser::UeConfig params) |
RRC configuration update indication function. More... | |
void | DoSendLoadInformation (EpcX2Sap::LoadInformationParams params) |
Send load information function. More... | |
void | DoSetPdschConfigDedicated (uint16_t rnti, LteRrcSap::PdschConfigDedicated pa) |
Set PDSCH config dedicated function. More... | |
void | DoTriggerHandover (uint16_t rnti, uint16_t targetCellId) |
Trigger handover function. More... | |
uint8_t | GetLogicalChannelGroup (EpsBearer bearer) |
uint8_t | GetLogicalChannelPriority (EpsBearer bearer) |
uint16_t | GetNewSrsConfigurationIndex (void) |
Allocate a new SRS configuration index for a new UE. More... | |
TypeId | GetRlcType (EpsBearer bearer) |
void | RemoveSrsConfigurationIndex (uint16_t srcCi) |
remove a previously allocated SRS configuration index More... | |
void | RemoveUe (uint16_t rnti) |
remove a UE from the cell More... | |
void | SendSystemInformation () |
method used to periodically send System Information More... | |
Private Attributes | |
bool | m_admitHandoverRequest |
The AdmitHandoverRequest attribute. More... | |
bool | m_admitRrcConnectionRequest |
The AdmitRrcConnectionRequest attribute. More... | |
std::set< uint8_t > | m_anrMeasIds |
List of measurement identities which are intended for ANR purpose. More... | |
LteAnrSapProvider * | m_anrSapProvider |
Interface to the ANR instance. More... | |
LteAnrSapUser * | m_anrSapUser |
Receive API calls from the ANR instance. More... | |
bool | m_carriersConfigured |
are carriers configured More... | |
LteCcmRrcSapProvider * | m_ccmRrcSapProvider |
Interface to the LteEnbComponentCarrierManager instance. More... | |
LteCcmRrcSapUser * | m_ccmRrcSapUser |
Receive API calls from the LteEnbComponentCarrierManager instance. More... | |
std::vector< LteEnbCmacSapProvider * > | m_cmacSapProvider |
Interface to the eNodeB MAC instance. More... | |
std::vector< LteEnbCmacSapUser * > | m_cmacSapUser |
Receive API calls from the eNodeB MAC instance. More... | |
std::set< uint8_t > | m_componentCarrierMeasIds |
List of measurement identities which are intended for component carrier management purposes. More... | |
std::map< uint8_t, Ptr< ComponentCarrierEnb > > | m_componentCarrierPhyConf |
component carrier phy configuration More... | |
bool | m_configured |
True if ConfigureCell() has been completed. More... | |
TracedCallback< uint64_t, uint16_t, uint16_t > | m_connectionEstablishedTrace |
The ConnectionEstablished trace source. More... | |
TracedCallback< uint64_t, uint16_t, uint16_t > | m_connectionReconfigurationTrace |
The ConnectionReconfiguration trace source. More... | |
Time | m_connectionRejectedTimeoutDuration |
The ConnectionRejectedTimeoutDuration attribute. More... | |
Time | m_connectionRequestTimeoutDuration |
The ConnectionRequestTimeoutDuration attribute. More... | |
Time | m_connectionSetupTimeoutDuration |
The ConnectionSetupTimeoutDuration attribute. More... | |
std::vector< LteEnbCphySapProvider * > | m_cphySapProvider |
Interface to the eNodeB PHY instances. More... | |
std::vector< LteEnbCphySapUser * > | m_cphySapUser |
Receive API calls from the eNodeB PHY instances. More... | |
uint8_t | m_defaultTransmissionMode |
The DefaultTransmissionMode attribute. More... | |
uint16_t | m_dlBandwidth |
Downlink transmission bandwidth configuration in number of Resource Blocks. More... | |
uint32_t | m_dlEarfcn |
Downlink E-UTRA Absolute Radio Frequency Channel Number. More... | |
enum LteEpsBearerToRlcMapping_t | m_epsBearerToRlcMapping |
The EpsBearerToRlcMapping attribute. More... | |
std::set< uint8_t > | m_ffrMeasIds |
List of measurement identities which are intended for FFR purpose. More... | |
std::vector< LteFfrRrcSapProvider * > | m_ffrRrcSapProvider |
Interface to the FFR algorithm instance. More... | |
std::vector< LteFfrRrcSapUser * > | m_ffrRrcSapUser |
Receive API calls from the FFR algorithm instance. More... | |
Callback< void, Ptr< Packet > > | m_forwardUpCallback |
forward up callback function More... | |
TracedCallback< uint64_t, uint16_t, uint16_t > | m_handoverEndOkTrace |
The HandoverEndOk trace source. More... | |
Time | m_handoverJoiningTimeoutDuration |
The HandoverJoiningTimeoutDuration attribute. More... | |
Time | m_handoverLeavingTimeoutDuration |
The HandoverLeavingTimeoutDuration attribute. More... | |
LteHandoverManagementSapProvider * | m_handoverManagementSapProvider |
Interface to the handover algorithm instance. More... | |
LteHandoverManagementSapUser * | m_handoverManagementSapUser |
Receive API calls from the handover algorithm instance. More... | |
std::set< uint8_t > | m_handoverMeasIds |
List of measurement identities which are intended for handover purpose. More... | |
TracedCallback< uint64_t, uint16_t, uint16_t, uint16_t > | m_handoverStartTrace |
The HandoverStart trace source. More... | |
uint16_t | m_lastAllocatedConfigurationIndex |
last allocated configuration index More... | |
uint16_t | m_lastAllocatedRnti |
Last allocated RNTI. More... | |
LteMacSapProvider * | m_macSapProvider |
Interface to the eNodeB MAC instance, to be used by RLC instances. More... | |
TracedCallback< uint16_t, uint16_t > | m_newUeContextTrace |
The NewUeContext trace source. More... | |
uint16_t | m_numberOfComponentCarriers |
number of component carriers More... | |
int8_t | m_qRxLevMin |
The QRxLevMin attribute. More... | |
bool | m_reconfigureUes |
reconfigure UEs? More... | |
TracedCallback< uint64_t, uint16_t, uint16_t, LteRrcSap::MeasurementReport > | m_recvMeasurementReportTrace |
The RecvMeasurementReport trace source. More... | |
LteEnbRrcSapProvider * | m_rrcSapProvider |
Interface to receive messages from UE over the RRC protocol. More... | |
LteEnbRrcSapUser * | m_rrcSapUser |
Interface to send messages to UE over the RRC protocol. More... | |
uint8_t | m_rsrpFilterCoefficient |
The RsrpFilterCoefficient attribute. More... | |
uint8_t | m_rsrqFilterCoefficient |
The RsrqFilterCoefficient attribute. More... | |
EpcEnbS1SapProvider * | m_s1SapProvider |
Interface to send messages to core network over the S1 protocol. More... | |
EpcEnbS1SapUser * | m_s1SapUser |
Interface to receive messages from core network over the S1 protocol. More... | |
std::vector< LteRrcSap::SystemInformationBlockType1 > | m_sib1 |
The System Information Block Type 1 that is currently broadcasted over BCH. More... | |
uint16_t | m_srsCurrentPeriodicityId |
The SrsPeriodicity attribute. More... | |
Time | m_systemInformationPeriodicity |
The SystemInformationPeriodicity attribute. More... | |
std::map< uint16_t, Ptr< UeManager > > | m_ueMap |
The UeMap attribute. More... | |
LteRrcSap::MeasConfig | m_ueMeasConfig |
List of measurement configuration which are active in every UE attached to this eNodeB instance. More... | |
std::set< uint16_t > | m_ueSrsConfigurationIndexSet |
UE SRS configuration index set. More... | |
uint16_t | m_ulBandwidth |
Uplink transmission bandwidth configuration in number of Resource Blocks. More... | |
uint32_t | m_ulEarfcn |
Uplink E-UTRA Absolute Radio Frequency Channel Number. More... | |
EpcX2SapProvider * | m_x2SapProvider |
Interface to send messages to neighbour eNodeB over the X2 interface. More... | |
EpcX2SapUser * | m_x2SapUser |
Interface to receive messages from neighbour eNodeB over the X2 interface. More... | |
std::map< uint32_t, X2uTeidInfo > | m_x2uTeidInfoMap |
TEID, RNTI, DRBID. More... | |
Friends | |
class | EnbRrcMemberLteEnbCmacSapUser |
allow EnbRrcMemberLteEnbCmacSapUser class friend access More... | |
class | EpcX2SpecificEpcX2SapUser< LteEnbRrc > |
allow MemberEpcEnbS1SapUser<LteEnbRrc> class friend access More... | |
class | MemberEpcEnbS1SapUser< LteEnbRrc > |
allow MemberLteEnbRrcSapProvider<LteEnbRrc> class friend access More... | |
class | MemberLteAnrSapUser< LteEnbRrc > |
allow MemberLteAnrSapUser<LteEnbRrc> class friend access More... | |
class | MemberLteCcmRrcSapUser< LteEnbRrc > |
allow MemberLteCcmRrcSapUser<LteEnbRrc> class friend access More... | |
class | MemberLteEnbRrcSapProvider< LteEnbRrc > |
allow MemberLteEnbRrcSapProvider<LteEnbRrc> class friend access More... | |
class | MemberLteFfrRrcSapUser< LteEnbRrc > |
allow MemberLteFfrRrcSapUser<LteEnbRrc> class friend access More... | |
class | MemberLteHandoverManagementSapUser< LteEnbRrc > |
allow MemberLteHandoverManagementSapUser<LteEnbRrc> class friend access More... | |
class | UeManager |
allow UeManager class friend access More... | |
Additional Inherited Members | |
Related Functions inherited from ns3::ObjectBase | |
static TypeId | GetObjectIid (void) |
Ensure the TypeId for ObjectBase gets fully configured to anchor the inheritance tree properly. More... | |
The LTE Radio Resource Control entity at the eNB.
ns3::LteEnbRrc is accessible through the following paths with Config::Set and Config::Connect:
Size of this type is 928 bytes (on a 64-bit architecture).
Definition at line 577 of file lte-enb-rrc.h.
typedef void(* ns3::LteEnbRrc::ConnectionHandoverTracedCallback) (const uint64_t imsi, const uint16_t cellId, const uint16_t rnti) |
TracedCallback signature for connection and handover end events.
[in] | imsi | |
[in] | cellId | |
[in] | rnti |
Definition at line 1005 of file lte-enb-rrc.h.
typedef void(* ns3::LteEnbRrc::HandoverStartTracedCallback) (const uint64_t imsi, const uint16_t cellId, const uint16_t rnti, const uint16_t targetCid) |
TracedCallback signature for handover start events.
[in] | imsi | |
[in] | cellId | |
[in] | rnti | |
[in] | targetCid |
Definition at line 1016 of file lte-enb-rrc.h.
typedef void(* ns3::LteEnbRrc::NewUeContextTracedCallback) (const uint16_t cellId, const uint16_t rnti) |
TracedCallback signature for new Ue Context events.
[in] | cellId | |
[in] | rnti |
Definition at line 995 of file lte-enb-rrc.h.
typedef void(* ns3::LteEnbRrc::ReceiveReportTracedCallback) (const uint64_t imsi, const uint16_t cellId, const uint16_t rnti, const LteRrcSap::MeasurementReport report) |
TracedCallback signature for receive measurement report events.
[in] | imsi | |
[in] | cellId | |
[in] | rnti | |
[in] | report |
LteRrcSap::MeasurementReport
argument should be changed to a const reference since the argument is large. Definition at line 1030 of file lte-enb-rrc.h.
Identifies how EPS Bearer parameters are mapped to different RLC types.
Enumerator | |
---|---|
RLC_SM_ALWAYS | |
RLC_UM_ALWAYS | |
RLC_AM_ALWAYS | |
PER_BASED |
Definition at line 983 of file lte-enb-rrc.h.
ns3::LteEnbRrc::LteEnbRrc | ( | ) |
create an RRC instance for use within an eNB
Definition at line 1486 of file lte-enb-rrc.cc.
References m_anrSapUser, m_ccmRrcSapUser, m_cmacSapProvider, m_cmacSapUser, m_cphySapProvider, m_cphySapUser, m_ffrRrcSapProvider, m_ffrRrcSapUser, m_handoverManagementSapUser, m_rrcSapProvider, m_s1SapUser, m_x2SapUser, and NS_LOG_FUNCTION.
|
virtual |
|
private |
Allocate a new RNTI for a new UE.
This is done in the following cases:
state | the initial state of the UeManager |
componentCarrierId | primary component carrier ID of the UeManager |
Definition at line 2600 of file lte-enb-rrc.cc.
References ComponentCarrierToCellId(), m_ccmRrcSapProvider, m_lastAllocatedRnti, m_newUeContextTrace, m_ueMap, NS_ASSERT_MSG(), NS_LOG_DEBUG, and NS_LOG_FUNCTION.
Referenced by DoAllocateTemporaryCellRnti(), and DoRecvHandoverRequest().
uint8_t ns3::LteEnbRrc::AddUeMeasReportConfig | ( | LteRrcSap::ReportConfigEutra | config | ) |
Add a new UE measurement reporting configuration.
config | the new reporting configuration |
Assuming intra-frequency environment, the new measurement reporting configuration will be automatically associated to the only measurement object (i.e., a new measurement identity will be automatically created).
Can only be called before the start of simulation.
Definition at line 1930 of file lte-enb-rrc.cc.
References ns3::LteRrcSap::ReportConfigEutra::BOTH, ns3::LteRrcSap::ThresholdEutra::choice, ns3::LteRrcSap::ReportConfigEutra::EVENT_A1, ns3::LteRrcSap::ReportConfigEutra::EVENT_A2, ns3::LteRrcSap::ReportConfigEutra::EVENT_A4, ns3::LteRrcSap::ReportConfigEutra::EVENT_A5, ns3::LteRrcSap::ReportConfigEutra::eventId, m_ueMeasConfig, ns3::LteRrcSap::MeasIdToAddMod::measId, ns3::LteRrcSap::MeasConfig::measIdToAddModList, ns3::LteRrcSap::MeasIdToAddMod::measObjectId, ns3::Simulator::Now(), NS_ASSERT_MSG(), NS_FATAL_ERROR, NS_LOG_FUNCTION, NS_LOG_WARN, ns3::LteRrcSap::ReportConfigEutra::purpose, ns3::LteRrcSap::ReportConfigEutra::REPORT_STRONGEST_CELLS, ns3::LteRrcSap::ReportConfigToAddMod::reportConfigEutra, ns3::LteRrcSap::ReportConfigToAddMod::reportConfigId, ns3::LteRrcSap::MeasIdToAddMod::reportConfigId, ns3::LteRrcSap::MeasConfig::reportConfigToAddModList, ns3::LteRrcSap::ReportConfigEutra::reportQuantity, ns3::LteRrcSap::ReportConfigEutra::RSRP, ns3::LteRrcSap::ReportConfigEutra::RSRQ, ns3::Seconds(), ns3::LteRrcSap::ReportConfigEutra::threshold1, ns3::LteRrcSap::ReportConfigEutra::threshold2, ns3::LteRrcSap::ThresholdEutra::THRESHOLD_RSRP, ns3::LteRrcSap::ThresholdEutra::THRESHOLD_RSRQ, and ns3::LteRrcSap::ReportConfigEutra::triggerQuantity.
Referenced by DoAddUeMeasReportConfigForAnr(), DoAddUeMeasReportConfigForComponentCarrier(), DoAddUeMeasReportConfigForFfr(), DoAddUeMeasReportConfigForHandover(), LteUeMeasurementsPiecewiseTestCase1::DoRun(), LteUeMeasurementsPiecewiseTestCase2::DoRun(), and LteUeMeasurementsHandoverTestCase::DoRun().
void ns3::LteEnbRrc::AddX2Neighbour | ( | uint16_t | cellId | ) |
Add a neighbour with an X2 interface.
cellId | neighbouring cell id |
Definition at line 2686 of file lte-enb-rrc.cc.
References ns3::LteAnrSapProvider::AddNeighbourRelation(), m_anrSapProvider, and NS_LOG_FUNCTION.
uint8_t ns3::LteEnbRrc::CellToComponentCarrierId | ( | uint16_t | cellId | ) |
convert the cell id to component carrier id
cellId | Cell ID |
Definition at line 2119 of file lte-enb-rrc.cc.
References m_componentCarrierPhyConf, NS_FATAL_ERROR, and NS_LOG_FUNCTION.
Referenced by DoRecvHandoverRequest().
uint16_t ns3::LteEnbRrc::ComponentCarrierToCellId | ( | uint8_t | componentCarrierId | ) |
convert the component carrier id to cell id
componentCarrierId | component carrier ID |
Definition at line 2133 of file lte-enb-rrc.cc.
References m_componentCarrierPhyConf, and NS_LOG_FUNCTION.
Referenced by AddUe(), and DoTriggerHandover().
void ns3::LteEnbRrc::ConfigureCarriers | ( | std::map< uint8_t, Ptr< ComponentCarrierEnb >> | ccPhyConf | ) |
Configure carriers.
ccPhyConf | the component carrier configuration |
Definition at line 1521 of file lte-enb-rrc.cc.
References ns3::Object::DoInitialize(), m_carriersConfigured, m_cmacSapProvider, m_cmacSapUser, m_componentCarrierPhyConf, m_cphySapProvider, m_cphySapUser, m_ffrRrcSapProvider, m_ffrRrcSapUser, m_numberOfComponentCarriers, MAX_NO_CC, MIN_NO_CC, NS_ASSERT, and NS_ASSERT_MSG().
void ns3::LteEnbRrc::ConfigureCell | ( | std::map< uint8_t, Ptr< ComponentCarrierEnb >> | ccPhyConf | ) |
Configure cell-specific parameters.
Configure cell-specific parameters and propagate them to lower layers. The parameters include bandwidth, EARFCN (E-UTRA Absolute Radio Frequency Channel Number), and cell ID.
In addition to parameter configuration, this function also performs several other tasks:
LteEnbRrc::AddUeMeasReportConfig
;Typically runs when the eNodeB NetDevice is installed, for instance by LteHelper::InstallEnbDevice
(i.e. before the simulation starts).
ccPhyConf | the component carrier configuration |
Definition at line 2018 of file lte-enb-rrc.cc.
References ns3::LteRrcSap::MeasObjectEutra::allowedMeasBandwidth, ns3::LteRrcSap::MeasObjectEutra::carrierFreq, ns3::LteRrcSap::SystemInformationBlockType1::cellAccessRelatedInfo, ns3::LteRrcSap::CellAccessRelatedInfo::cellIdentity, ns3::LteRrcSap::SystemInformationBlockType1::cellSelectionInfo, ns3::LteRrcSap::CellAccessRelatedInfo::csgIdentity, ns3::LteRrcSap::CellAccessRelatedInfo::csgIndication, ns3::LteRrcSap::MasterInformationBlock::dlBandwidth, ns3::LteRrcSap::QuantityConfig::filterCoefficientRSRP, ns3::LteRrcSap::QuantityConfig::filterCoefficientRSRQ, ns3::LteRrcSap::MeasObjectEutra::haveCellForWhichToReportCGI, ns3::LteRrcSap::MeasConfig::haveMeasGapConfig, ns3::LteRrcSap::MeasConfig::haveQuantityConfig, ns3::LteRrcSap::MeasConfig::haveSmeasure, ns3::LteRrcSap::MeasConfig::haveSpeedStatePars, m_cmacSapProvider, m_configured, m_cphySapProvider, m_dlBandwidth, m_dlEarfcn, m_ffrRrcSapProvider, m_qRxLevMin, m_rsrpFilterCoefficient, m_rsrqFilterCoefficient, m_sib1, m_ueMeasConfig, m_ulBandwidth, m_ulEarfcn, ns3::LteRrcSap::MeasObjectToAddMod::measObjectEutra, ns3::LteRrcSap::MeasObjectToAddMod::measObjectId, ns3::LteRrcSap::MeasConfig::measObjectToAddModList, ns3::MilliSeconds(), ns3::LteRrcSap::MeasObjectEutra::neighCellConfig, NS_ASSERT, NS_LOG_FUNCTION, ns3::LteRrcSap::MeasObjectEutra::offsetFreq, ns3::LteRrcSap::PlmnIdentityInfo::plmnIdentity, ns3::LteRrcSap::CellAccessRelatedInfo::plmnIdentityInfo, ns3::LteRrcSap::MeasObjectEutra::presenceAntennaPort1, ns3::LteRrcSap::CellSelectionInfo::qQualMin, ns3::LteRrcSap::CellSelectionInfo::qRxLevMin, ns3::LteRrcSap::MeasConfig::quantityConfig, ns3::Simulator::Schedule(), SendSystemInformation(), and ns3::LteRrcSap::MasterInformationBlock::systemFrameNumber.
void ns3::LteEnbRrc::ConnectionRejectedTimeout | ( | uint16_t | rnti | ) |
Method triggered a while after sending RRC Connection Rejected.
The method will remove the UE context.
rnti | the T-C-RNTI whose timeout expired |
Definition at line 2178 of file lte-enb-rrc.cc.
References ns3::UeManager::CONNECTION_REJECTED, GetUeManager(), NS_ASSERT_MSG(), NS_LOG_FUNCTION, RemoveUe(), and ns3::ToString().
Referenced by ns3::UeManager::RecvRrcConnectionRequest().
void ns3::LteEnbRrc::ConnectionRequestTimeout | ( | uint16_t | rnti | ) |
Method triggered when a UE is expected to request for connection but does not do so in a reasonable time.
The method will remove the UE context.
rnti | the T-C-RNTI whose timeout expired |
Definition at line 2160 of file lte-enb-rrc.cc.
References GetUeManager(), ns3::UeManager::INITIAL_RANDOM_ACCESS, NS_ASSERT_MSG(), NS_LOG_FUNCTION, RemoveUe(), and ns3::ToString().
Referenced by ns3::UeManager::DoInitialize().
void ns3::LteEnbRrc::ConnectionSetupTimeout | ( | uint16_t | rnti | ) |
Method triggered when a UE is expected to complete a connection setup procedure but does not do so in a reasonable time.
The method will remove the UE context.
rnti | the T-C-RNTI whose timeout expired |
Definition at line 2169 of file lte-enb-rrc.cc.
References ns3::UeManager::CONNECTION_SETUP, GetUeManager(), NS_ASSERT_MSG(), NS_LOG_FUNCTION, RemoveUe(), and ns3::ToString().
Referenced by ns3::UeManager::RecvRrcConnectionRequest().
|
private |
Add UE measure report config for ANR function.
reportConfig | LteRrcSap::ReportConfigEutra |
Definition at line 2566 of file lte-enb-rrc.cc.
References AddUeMeasReportConfig(), m_anrMeasIds, and NS_LOG_FUNCTION.
|
private |
Add UE measure report config for component carrier function.
reportConfig | LteRrcSap::ReportConfigEutra |
Definition at line 2515 of file lte-enb-rrc.cc.
References AddUeMeasReportConfig(), m_componentCarrierMeasIds, and NS_LOG_FUNCTION.
|
private |
Add UE measure report config for FFR function.
reportConfig | LteRrcSap::ReportConfigEutra |
Definition at line 2575 of file lte-enb-rrc.cc.
References AddUeMeasReportConfig(), m_ffrMeasIds, and NS_LOG_FUNCTION.
|
private |
Add UE measure report config for handover function.
reportConfig | LteRrcSap::ReportConfigEutra |
Definition at line 2506 of file lte-enb-rrc.cc.
References AddUeMeasReportConfig(), m_handoverMeasIds, and NS_LOG_FUNCTION.
|
private |
Allocate temporary cell RNTI function.
componentCarrierId | ID of the primary component carrier |
Definition at line 2484 of file lte-enb-rrc.cc.
References AddUe(), ns3::UeManager::INITIAL_RANDOM_ACCESS, and NS_LOG_FUNCTION.
Referenced by ns3::EnbRrcMemberLteEnbCmacSapUser::AllocateTemporaryCellRnti().
|
private |
Part of the RRC protocol.
Forwarding LteEnbRrcSapProvider::CompleteSetupUe interface to UeManager::CompleteSetupUe
rnti | the RNTI |
params | the LteEnbRrcSapProvider::CompleteSetupUeParameters |
Definition at line 2217 of file lte-enb-rrc.cc.
References GetUeManager(), and NS_LOG_FUNCTION.
|
private |
Data radio beaerer setup request function.
params | EpcEnbS1SapUser::DataRadioBearerSetupRequestParameters |
Definition at line 2266 of file lte-enb-rrc.cc.
References ns3::EpcEnbS1SapUser::DataRadioBearerSetupRequestParameters::bearer, ns3::EpcEnbS1SapUser::DataRadioBearerSetupRequestParameters::bearerId, GetUeManager(), ns3::EpcEnbS1SapUser::DataRadioBearerSetupRequestParameters::gtpTeid, ns3::EpcEnbS1SapUser::DataRadioBearerSetupRequestParameters::rnti, and ns3::EpcEnbS1SapUser::DataRadioBearerSetupRequestParameters::transportLayerAddress.
|
protectedvirtual |
Destructor implementation.
This method is called by Dispose() or by the Object's destructor, whichever comes first.
Subclasses are expected to implement their real destruction code in an overridden version of this method and chain up to their parent's implementation once they are done. i.e, for simplicity, the destructor of every subclass should be empty and its content should be moved to the associated DoDispose() method.
It is safe to call GetObject() from within this method.
Reimplemented from ns3::Object.
Definition at line 1549 of file lte-enb-rrc.cc.
References m_anrSapUser, m_ccmRrcSapUser, m_cmacSapUser, m_cphySapUser, m_ffrRrcSapUser, m_handoverManagementSapUser, m_numberOfComponentCarriers, m_rrcSapProvider, m_s1SapUser, m_ueMap, m_x2SapUser, and NS_LOG_FUNCTION.
|
private |
Notify LC config result function.
rnti | RNTI |
lcid | LCID |
success | the success indicator |
Definition at line 2498 of file lte-enb-rrc.cc.
References NS_FATAL_ERROR, and NS_LOG_FUNCTION.
Referenced by ns3::EnbRrcMemberLteEnbCmacSapUser::NotifyLcConfigResult().
|
private |
Path switch request acknowledge function.
params | EpcEnbS1SapUser::PathSwitchRequestAcknowledgeParameters |
Definition at line 2273 of file lte-enb-rrc.cc.
References GetUeManager(), and ns3::EpcEnbS1SapUser::PathSwitchRequestAcknowledgeParameters::rnti.
|
private |
Receive handover preparation failure function.
params | EpcX2SapUser::HandoverPreparationFailureParams |
Definition at line 2386 of file lte-enb-rrc.cc.
References ns3::EpcX2Sap::HandoverPreparationFailureParams::cause, ns3::EpcX2Sap::HandoverPreparationFailureParams::criticalityDiagnostics, GetUeManager(), NS_LOG_FUNCTION, NS_LOG_LOGIC(), ns3::EpcX2Sap::HandoverPreparationFailureParams::oldEnbUeX2apId, ns3::EpcX2Sap::HandoverPreparationFailureParams::sourceCellId, and ns3::EpcX2Sap::HandoverPreparationFailureParams::targetCellId.
|
private |
Receive handover request function.
params | EpcX2SapUser::HandoverRequestParams |
Definition at line 2280 of file lte-enb-rrc.cc.
References AddUe(), ns3::EpcX2Sap::HandoverRequestAckParams::admittedBearers, ns3::EpcX2Sap::HandoverRequestParams::bearers, ns3::LteRrcSap::MobilityControlInfo::carrierBandwidth, ns3::LteRrcSap::MobilityControlInfo::carrierFreq, ns3::EpcX2Sap::HandoverPreparationFailureParams::cause, CellToComponentCarrierId(), ns3::EpcX2Sap::HandoverPreparationFailureParams::criticalityDiagnostics, ns3::LteRrcSap::CarrierBandwidthEutra::dlBandwidth, ns3::LteRrcSap::CarrierFreqEutra::dlCarrierFreq, ns3::LteEnbRrcSapUser::EncodeHandoverCommand(), ns3::EpcX2Sap::ErabAdmittedItem::erabId, GetUeManager(), ns3::UeManager::HANDOVER_JOINING, ns3::LteRrcSap::MobilityControlInfo::haveCarrierBandwidth, ns3::LteRrcSap::MobilityControlInfo::haveCarrierFreq, ns3::LteRrcSap::RrcConnectionReconfiguration::haveMobilityControlInfo, ns3::LteRrcSap::RrcConnectionReconfiguration::haveNonCriticalExtension, ns3::LteRrcSap::MobilityControlInfo::haveRachConfigDedicated, m_admitHandoverRequest, m_cmacSapProvider, m_dlBandwidth, m_dlEarfcn, m_rrcSapUser, m_ulBandwidth, m_ulEarfcn, m_x2SapProvider, ns3::EpcX2Sap::HandoverRequestParams::mmeUeS1apId, ns3::LteRrcSap::RrcConnectionReconfiguration::mobilityControlInfo, ns3::EpcX2Sap::HandoverRequestAckParams::newEnbUeX2apId, ns3::LteRrcSap::MobilityControlInfo::newUeIdentity, NS_FATAL_ERROR, NS_LOG_FUNCTION, NS_LOG_INFO, NS_LOG_LOGIC(), ns3::LteEnbCmacSapProvider::RachConfig::numberOfRaPreambles, ns3::LteRrcSap::PreambleInfo::numberOfRaPreambles, ns3::EpcX2Sap::HandoverRequestParams::oldEnbUeX2apId, ns3::EpcX2Sap::HandoverRequestAckParams::oldEnbUeX2apId, ns3::EpcX2Sap::HandoverPreparationFailureParams::oldEnbUeX2apId, ns3::LteRrcSap::RachConfigCommon::preambleInfo, ns3::LteEnbCmacSapProvider::RachConfig::preambleTransMax, ns3::LteRrcSap::RaSupervisionInfo::preambleTransMax, ns3::LteRrcSap::RadioResourceConfigCommon::rachConfigCommon, ns3::LteRrcSap::MobilityControlInfo::rachConfigDedicated, ns3::LteRrcSap::MobilityControlInfo::radioResourceConfigCommon, ns3::LteEnbCmacSapProvider::AllocateNcRaPreambleReturnValue::raPrachMaskIndex, ns3::LteRrcSap::RachConfigDedicated::raPrachMaskIndex, ns3::LteEnbCmacSapProvider::AllocateNcRaPreambleReturnValue::raPreambleId, ns3::LteRrcSap::RachConfigDedicated::raPreambleIndex, ns3::LteEnbCmacSapProvider::RachConfig::raResponseWindowSize, ns3::LteRrcSap::RaSupervisionInfo::raResponseWindowSize, ns3::LteRrcSap::RachConfigCommon::raSupervisionInfo, RemoveUe(), ns3::EpcX2Sap::HandoverRequestAckParams::rrcContext, ns3::EpcX2SapProvider::SendHandoverPreparationFailure(), ns3::EpcX2SapProvider::SendHandoverRequestAck(), ns3::EpcX2Sap::HandoverRequestParams::sourceCellId, ns3::EpcX2Sap::HandoverRequestAckParams::sourceCellId, ns3::EpcX2Sap::HandoverPreparationFailureParams::sourceCellId, ns3::EpcX2Sap::HandoverRequestParams::targetCellId, ns3::EpcX2Sap::HandoverRequestAckParams::targetCellId, ns3::EpcX2Sap::HandoverPreparationFailureParams::targetCellId, ns3::LteRrcSap::MobilityControlInfo::targetPhysCellId, ns3::LteRrcSap::CarrierBandwidthEutra::ulBandwidth, ns3::LteRrcSap::CarrierFreqEutra::ulCarrierFreq, and ns3::LteEnbCmacSapProvider::AllocateNcRaPreambleReturnValue::valid.
|
private |
Receive handover request acknowledge function.
params | EpcX2SapUser::HandoverRequestAckParams |
Definition at line 2369 of file lte-enb-rrc.cc.
References GetUeManager(), ns3::EpcX2Sap::HandoverRequestAckParams::newEnbUeX2apId, NS_LOG_FUNCTION, NS_LOG_LOGIC(), ns3::EpcX2Sap::HandoverRequestAckParams::oldEnbUeX2apId, ns3::EpcX2Sap::HandoverRequestAckParams::sourceCellId, and ns3::EpcX2Sap::HandoverRequestAckParams::targetCellId.
|
private |
Receive load information function.
params | EpcX2SapUser::LoadInformationParams |
Definition at line 2435 of file lte-enb-rrc.cc.
References ns3::EpcX2Sap::LoadInformationParams::cellInformationList, m_ffrRrcSapProvider, NS_LOG_FUNCTION, and NS_LOG_LOGIC().
|
private |
Part of the RRC protocol.
Forwarding LteEnbRrcSapProvider::RecvMeasurementReport interface to UeManager::RecvMeasurementReport
rnti | the RNTI |
msg | the LteRrcSap::MeasurementReport |
Definition at line 2259 of file lte-enb-rrc.cc.
References GetUeManager(), and NS_LOG_FUNCTION.
|
private |
Receive resource status update function.
params | EpcX2SapUser::ResourceStatusUpdateParams |
Definition at line 2447 of file lte-enb-rrc.cc.
References ns3::EpcX2Sap::ResourceStatusUpdateParams::cellMeasurementResultList, NS_ASSERT, NS_LOG_FUNCTION, and NS_LOG_LOGIC().
|
private |
Part of the RRC protocol.
Forwarding LteEnbRrcSapProvider::RecvRrcConnectionReconfigurationCompleted interface to UeManager::RecvRrcConnectionReconfigurationCompleted
rnti | the RNTI |
msg | the LteRrcSap::RrcConnectionReconfigurationCompleted |
Definition at line 2238 of file lte-enb-rrc.cc.
References GetUeManager(), and NS_LOG_FUNCTION.
|
private |
Part of the RRC protocol.
Forwarding LteEnbRrcSapProvider::RecvRrcConnectionReestablishmentComplete interface to UeManager::RecvRrcConnectionReestablishmentComplete
rnti | the RNTI |
msg | the LteRrcSap::RrcConnectionReestablishmentComplete |
Definition at line 2252 of file lte-enb-rrc.cc.
References GetUeManager(), and NS_LOG_FUNCTION.
|
private |
Part of the RRC protocol.
Forwarding LteEnbRrcSapProvider::RecvRrcConnectionReestablishmentRequest interface to UeManager::RecvRrcConnectionReestablishmentRequest
rnti | the RNTI |
msg | the LteRrcSap::RrcConnectionReestablishmentRequest |
Definition at line 2245 of file lte-enb-rrc.cc.
References GetUeManager(), and NS_LOG_FUNCTION.
|
private |
Part of the RRC protocol.
Forwarding LteEnbRrcSapProvider::RecvRrcConnectionRequest interface to UeManager::RecvRrcConnectionRequest
rnti | the RNTI |
msg | the LteRrcSap::RrcConnectionRequest |
Definition at line 2224 of file lte-enb-rrc.cc.
References GetUeManager(), and NS_LOG_FUNCTION.
|
private |
Part of the RRC protocol.
Forwarding LteEnbRrcSapProvider::RecvRrcConnectionSetupCompleted interface to UeManager::RecvRrcConnectionSetupCompleted
rnti | the RNTI |
msg | the LteRrcSap::RrcConnectionSetupCompleted |
Definition at line 2231 of file lte-enb-rrc.cc.
References GetUeManager(), and NS_LOG_FUNCTION.
|
private |
Receive SN status transfer function.
params | EpcX2SapUser::SnStatusTransferParams |
Definition at line 2404 of file lte-enb-rrc.cc.
References ns3::EpcX2Sap::SnStatusTransferParams::erabsSubjectToStatusTransferList, GetUeManager(), ns3::EpcX2Sap::SnStatusTransferParams::newEnbUeX2apId, NS_LOG_FUNCTION, NS_LOG_LOGIC(), and ns3::EpcX2Sap::SnStatusTransferParams::oldEnbUeX2apId.
|
private |
Receive UE context release function.
params | EpcX2SapUser::UeContextReleaseParams |
Definition at line 2420 of file lte-enb-rrc.cc.
References GetUeManager(), ns3::EpcX2Sap::UeContextReleaseParams::newEnbUeX2apId, NS_LOG_FUNCTION, NS_LOG_LOGIC(), ns3::EpcX2Sap::UeContextReleaseParams::oldEnbUeX2apId, and RemoveUe().
|
private |
Receive UE data function.
params | EpcX2SapUser::UeDataParams |
Definition at line 2459 of file lte-enb-rrc.cc.
References ns3::Packet::GetSize(), GetUeManager(), ns3::EpcX2Sap::UeDataParams::gtpTeid, m_x2uTeidInfoMap, NS_FATAL_ERROR, NS_LOG_FUNCTION, NS_LOG_LOGIC(), ns3::EpcX2Sap::UeDataParams::sourceCellId, ns3::EpcX2Sap::UeDataParams::targetCellId, and ns3::EpcX2Sap::UeDataParams::ueData.
|
private |
RRC configuration update indication function.
params | LteEnbCmacSapUser::UeConfig |
Definition at line 2491 of file lte-enb-rrc.cc.
References GetUeManager(), and ns3::LteEnbCmacSapUser::UeConfig::m_rnti.
Referenced by ns3::EnbRrcMemberLteEnbCmacSapUser::RrcConfigurationUpdateInd().
|
private |
Send load information function.
params | EpcX2Sap::LoadInformationParams |
Definition at line 2592 of file lte-enb-rrc.cc.
References m_x2SapProvider, NS_LOG_FUNCTION, and ns3::EpcX2SapProvider::SendLoadInformation().
void ns3::LteEnbRrc::DoSendReleaseDataRadioBearer | ( | uint64_t | imsi, |
uint16_t | rnti, | ||
uint8_t | bearerId | ||
) |
This function acts as an interface to trigger Release indication messages towards eNB and EPC.
imsi | the IMSI |
rnti | the RNTI |
bearerId | Bearer Identity which is to be de-activated |
Definition at line 540 of file lte-enb-rrc.cc.
References ns3::EpcEnbS1SapProvider::DoSendReleaseIndication(), GetUeManager(), and m_s1SapProvider.
|
private |
Set PDSCH config dedicated function.
rnti | the RNTI |
pa | LteRrcSap::PdschConfigDedicated |
Definition at line 2584 of file lte-enb-rrc.cc.
References GetUeManager(), and NS_LOG_FUNCTION.
|
private |
Trigger handover function.
rnti | RNTI |
targetCellId | target cell ID |
Definition at line 2524 of file lte-enb-rrc.cc.
References ComponentCarrierToCellId(), ns3::UeManager::CONNECTED_NORMALLY, ns3::LteAnrSapProvider::GetNoHo(), ns3::LteAnrSapProvider::GetNoX2(), GetUeManager(), m_anrSapProvider, NS_ASSERT_MSG(), NS_LOG_DEBUG, NS_LOG_FUNCTION, NS_LOG_LOGIC(), and ns3::ToString().
EpcX2SapUser * ns3::LteEnbRrc::GetEpcX2SapUser | ( | ) |
Get the X2 SAP offered by this RRC.
Definition at line 1744 of file lte-enb-rrc.cc.
References m_x2SapUser, and NS_LOG_FUNCTION.
|
private |
bearer | the characteristics of the bearer |
Definition at line 2829 of file lte-enb-rrc.cc.
References ns3::EpsBearer::IsGbr().
|
private |
bearer | the characteristics of the bearer |
Definition at line 2842 of file lte-enb-rrc.cc.
References ns3::EpsBearer::qci.
LteAnrSapUser * ns3::LteEnbRrc::GetLteAnrSapUser | ( | ) |
Get the ANR SAP offered by this RRC.
Definition at line 1814 of file lte-enb-rrc.cc.
References m_anrSapUser, and NS_LOG_FUNCTION.
LteCcmRrcSapUser * ns3::LteEnbRrc::GetLteCcmRrcSapUser | ( | ) |
Get the Component Carrier Management SAP offered by this RRC.
Definition at line 1800 of file lte-enb-rrc.cc.
References m_ccmRrcSapUser, and NS_LOG_FUNCTION.
LteEnbCmacSapUser * ns3::LteEnbRrc::GetLteEnbCmacSapUser | ( | ) |
Get the CMAC SAP offered by this RRC.
Definition at line 1765 of file lte-enb-rrc.cc.
References m_cmacSapUser, and NS_LOG_FUNCTION.
LteEnbCmacSapUser * ns3::LteEnbRrc::GetLteEnbCmacSapUser | ( | uint8_t | pos | ) |
Get the CMAC SAP offered by this RRC.
pos | the position |
Definition at line 1772 of file lte-enb-rrc.cc.
References m_cmacSapUser, and NS_LOG_FUNCTION.
LteEnbCphySapUser * ns3::LteEnbRrc::GetLteEnbCphySapUser | ( | ) |
Definition at line 1891 of file lte-enb-rrc.cc.
References m_cphySapUser, and NS_LOG_FUNCTION.
LteEnbCphySapUser * ns3::LteEnbRrc::GetLteEnbCphySapUser | ( | uint8_t | pos | ) |
Get the ENB CPhy SAP user.
pos | the position |
Definition at line 1905 of file lte-enb-rrc.cc.
References m_cphySapUser, and NS_LOG_FUNCTION.
LteEnbRrcSapProvider * ns3::LteEnbRrc::GetLteEnbRrcSapProvider | ( | ) |
Definition at line 1857 of file lte-enb-rrc.cc.
References m_rrcSapProvider, and NS_LOG_FUNCTION.
LteFfrRrcSapUser * ns3::LteEnbRrc::GetLteFfrRrcSapUser | ( | ) |
Get the FFR SAP offered by this RRC.
Definition at line 1835 of file lte-enb-rrc.cc.
References m_ffrRrcSapUser, and NS_LOG_FUNCTION.
LteFfrRrcSapUser * ns3::LteEnbRrc::GetLteFfrRrcSapUser | ( | uint8_t | index | ) |
Get the FFR SAP offered by this RRC.
index | the index |
Definition at line 1842 of file lte-enb-rrc.cc.
References m_ffrRrcSapUser, m_numberOfComponentCarriers, NS_ASSERT_MSG(), and NS_LOG_FUNCTION.
LteHandoverManagementSapUser * ns3::LteEnbRrc::GetLteHandoverManagementSapUser | ( | ) |
Get the Handover Management SAP offered by this RRC.
Definition at line 1786 of file lte-enb-rrc.cc.
References m_handoverManagementSapUser, and NS_LOG_FUNCTION.
|
private |
Allocate a new SRS configuration index for a new UE.
Definition at line 2766 of file lte-enb-rrc.cc.
References ns3::g_srsCiHigh, ns3::g_srsCiLow, ns3::g_srsPeriodicity, m_lastAllocatedConfigurationIndex, m_srsCurrentPeriodicityId, m_ueSrsConfigurationIndexSet, NS_ASSERT, NS_FATAL_ERROR, NS_LOG_DEBUG, NS_LOG_FUNCTION, and ns3::SRS_ENTRIES.
bearer | the specification of an EPS bearer |
Definition at line 2651 of file lte-enb-rrc.cc.
References ns3::EpsBearer::GetPacketErrorLossRate(), ns3::LteRlcUm::GetTypeId(), ns3::LteRlcAm::GetTypeId(), ns3::LteRlcSm::GetTypeId(), m_epsBearerToRlcMapping, PER_BASED, RLC_AM_ALWAYS, RLC_SM_ALWAYS, and RLC_UM_ALWAYS.
EpcEnbS1SapUser * ns3::LteEnbRrc::GetS1SapUser | ( | ) |
uint32_t ns3::LteEnbRrc::GetSrsPeriodicity | ( | ) | const |
Definition at line 2756 of file lte-enb-rrc.cc.
References ns3::g_srsPeriodicity, m_srsCurrentPeriodicityId, NS_ASSERT, NS_LOG_FUNCTION, and ns3::SRS_ENTRIES.
Referenced by GetTypeId().
|
static |
Get the type ID.
Definition at line 1578 of file lte-enb-rrc.cc.
References ns3::TypeId::ATTR_CONSTRUCT, ns3::TypeId::ATTR_GET, GetSrsPeriodicity(), m_admitHandoverRequest, m_admitRrcConnectionRequest, m_connectionEstablishedTrace, m_connectionReconfigurationTrace, m_connectionRejectedTimeoutDuration, m_connectionRequestTimeoutDuration, m_connectionSetupTimeoutDuration, m_defaultTransmissionMode, m_epsBearerToRlcMapping, m_handoverEndOkTrace, m_handoverJoiningTimeoutDuration, m_handoverLeavingTimeoutDuration, m_handoverStartTrace, m_newUeContextTrace, m_numberOfComponentCarriers, m_qRxLevMin, m_recvMeasurementReportTrace, m_rsrpFilterCoefficient, m_rsrqFilterCoefficient, m_systemInformationPeriodicity, m_ueMap, ns3::MakeBooleanAccessor(), ns3::MakeBooleanChecker(), ns3::MakeEnumAccessor(), ns3::MakeEnumChecker(), ns3::MakeIntegerAccessor(), ns3::MakeObjectMapAccessor(), ns3::MakeTimeAccessor(), ns3::MakeTimeChecker(), ns3::MakeTraceSourceAccessor(), ns3::MakeUintegerAccessor(), MAX_NO_CC, ns3::MilliSeconds(), MIN_NO_CC, NS_LOG_FUNCTION, PER_BASED, RLC_AM_ALWAYS, RLC_SM_ALWAYS, RLC_UM_ALWAYS, ns3::TypeId::SetParent(), and SetSrsPeriodicity().
rnti | the identifier of an UE |
Definition at line 1920 of file lte-enb-rrc.cc.
References m_ueMap, NS_ASSERT, NS_ASSERT_MSG(), and NS_LOG_FUNCTION.
Referenced by ConnectionRejectedTimeout(), ConnectionRequestTimeout(), ConnectionSetupTimeout(), DoCompleteSetupUe(), DoDataRadioBearerSetupRequest(), DoPathSwitchRequestAcknowledge(), DoRecvHandoverPreparationFailure(), DoRecvHandoverRequest(), DoRecvHandoverRequestAck(), DoRecvMeasurementReport(), DoRecvRrcConnectionReconfigurationCompleted(), DoRecvRrcConnectionReestablishmentComplete(), DoRecvRrcConnectionReestablishmentRequest(), DoRecvRrcConnectionRequest(), DoRecvRrcConnectionSetupCompleted(), DoRecvSnStatusTransfer(), DoRecvUeContextRelease(), DoRecvUeData(), DoRrcConfigurationUpdateInd(), DoSendReleaseDataRadioBearer(), DoSetPdschConfigDedicated(), DoTriggerHandover(), HandoverJoiningTimeout(), HandoverLeavingTimeout(), SendData(), and SendHandoverRequest().
void ns3::LteEnbRrc::HandoverJoiningTimeout | ( | uint16_t | rnti | ) |
Method triggered when a UE is expected to join the cell for a handover but does not do so in a reasonable time.
The method will remove the UE context.
rnti | the C-RNTI whose timeout expired |
Definition at line 2187 of file lte-enb-rrc.cc.
References GetUeManager(), ns3::UeManager::HANDOVER_JOINING, NS_ASSERT_MSG(), NS_LOG_FUNCTION, RemoveUe(), and ns3::ToString().
Referenced by ns3::UeManager::DoInitialize().
void ns3::LteEnbRrc::HandoverLeavingTimeout | ( | uint16_t | rnti | ) |
Method triggered when a UE is expected to leave a cell for a handover but no feedback is received in a reasonable time.
The method will remove the UE context.
rnti | the C-RNTI whose timeout expired |
Definition at line 2196 of file lte-enb-rrc.cc.
References GetUeManager(), ns3::UeManager::HANDOVER_LEAVING, NS_ASSERT_MSG(), NS_LOG_FUNCTION, RemoveUe(), and ns3::ToString().
Referenced by ns3::UeManager::RecvHandoverRequestAck().
bool ns3::LteEnbRrc::HasUeManager | ( | uint16_t | rnti | ) | const |
rnti | the identifier of an UE |
Definition at line 1912 of file lte-enb-rrc.cc.
References m_ueMap, and NS_LOG_FUNCTION.
|
private |
remove a previously allocated SRS configuration index
srcCi | the indext to be removed |
Definition at line 2820 of file lte-enb-rrc.cc.
References m_ueSrsConfigurationIndexSet, NS_ASSERT_MSG(), and NS_LOG_FUNCTION.
Referenced by RemoveUe().
|
private |
remove a UE from the cell
rnti | the C-RNTI identiftying the user |
Definition at line 2629 of file lte-enb-rrc.cc.
References m_ccmRrcSapProvider, m_cmacSapProvider, m_cphySapProvider, m_numberOfComponentCarriers, m_s1SapProvider, m_ueMap, NS_ASSERT_MSG(), NS_LOG_FUNCTION, RemoveSrsConfigurationIndex(), and ns3::EpcEnbS1SapProvider::UeContextRelease().
Referenced by ConnectionRejectedTimeout(), ConnectionRequestTimeout(), ConnectionSetupTimeout(), DoRecvHandoverRequest(), DoRecvUeContextRelease(), HandoverJoiningTimeout(), and HandoverLeavingTimeout().
Enqueue an IP data packet on the proper bearer for downlink transmission.
Normally expected to be called by the NetDevice forwarding a packet coming from the EpcEnbApplication
p | the packet |
Definition at line 2140 of file lte-enb-rrc.cc.
References ns3::EpsBearerTag::GetBid(), ns3::EpsBearerTag::GetRnti(), GetUeManager(), NS_ASSERT_MSG(), NS_LOG_FUNCTION, and ns3::Packet::RemovePacketTag().
void ns3::LteEnbRrc::SendHandoverRequest | ( | uint16_t | rnti, |
uint16_t | cellId | ||
) |
Send a HandoverRequest through the X2 SAP interface.
This method will trigger a handover which is started by the RRC by sending a handover request to the target eNB over the X2 interface
rnti | the ID of the UE to be handed over |
cellId | the ID of the target eNB |
Definition at line 2205 of file lte-enb-rrc.cc.
References GetUeManager(), m_configured, NS_ASSERT, NS_LOG_FUNCTION, and NS_LOG_LOGIC().
|
private |
method used to periodically send System Information
Definition at line 2848 of file lte-enb-rrc.cc.
References ns3::LteRrcSap::SystemInformationBlockType2::freqInfo, ns3::LteRrcSap::SystemInformation::haveSib2, m_cmacSapProvider, m_componentCarrierPhyConf, m_cphySapProvider, m_rrcSapUser, m_systemInformationPeriodicity, ns3::LteEnbCmacSapProvider::RachConfig::numberOfRaPreambles, ns3::LteRrcSap::PreambleInfo::numberOfRaPreambles, ns3::LteRrcSap::PdschConfigCommon::pb, ns3::LteRrcSap::RadioResourceConfigCommonSib::pdschConfigCommon, ns3::LteRrcSap::RachConfigCommon::preambleInfo, ns3::LteEnbCmacSapProvider::RachConfig::preambleTransMax, ns3::LteRrcSap::RaSupervisionInfo::preambleTransMax, ns3::LteRrcSap::RadioResourceConfigCommonSib::rachConfigCommon, ns3::LteRrcSap::SystemInformationBlockType2::radioResourceConfigCommon, ns3::LteEnbCmacSapProvider::RachConfig::raResponseWindowSize, ns3::LteRrcSap::RaSupervisionInfo::raResponseWindowSize, ns3::LteRrcSap::RachConfigCommon::raSupervisionInfo, ns3::LteRrcSap::PdschConfigCommon::referenceSignalPower, ns3::Simulator::Schedule(), ns3::LteEnbRrcSapUser::SendSystemInformation(), ns3::LteRrcSap::SystemInformation::sib2, ns3::LteRrcSap::FreqInfo::ulBandwidth, and ns3::LteRrcSap::FreqInfo::ulCarrierFreq.
Referenced by ConfigureCell().
void ns3::LteEnbRrc::SetCellId | ( | uint16_t | m_cellId | ) |
set the cell id of this eNB
m_cellId |
Definition at line 2103 of file lte-enb-rrc.cc.
References m_cphySapProvider, and m_sib1.
void ns3::LteEnbRrc::SetCellId | ( | uint16_t | m_cellId, |
uint8_t | ccIndex | ||
) |
set the cell id of this eNB
m_cellId | |
ccIndex |
Definition at line 2111 of file lte-enb-rrc.cc.
References m_cphySapProvider, and m_sib1.
void ns3::LteEnbRrc::SetCsgId | ( | uint32_t | csgId, |
bool | csgIndication | ||
) |
Associate this RRC entity with a particular CSG information.
csgId | the intended Closed Subscriber Group identity |
csgIndication | if TRUE, only CSG members are allowed to access the cell |
CSG identity is a number identifying a Closed Subscriber Group which the cell belongs to. eNodeB is associated with a single CSG identity.
The same CSG identity can also be associated to several UEs, which is equivalent as enlisting these UEs as the members of this particular CSG. When the CSG indication field is set to TRUE, only UEs which are members of the CSG (i.e. same CSG ID) can gain access to the eNodeB, therefore enforcing closed access mode. Otherwise, the eNodeB operates as a non-CSG cell and implements open access mode.
This restriction only applies to initial cell selection and EPC-enabled simulation.
Definition at line 2697 of file lte-enb-rrc.cc.
References m_cphySapProvider, m_sib1, and NS_LOG_FUNCTION.
void ns3::LteEnbRrc::SetEpcX2SapProvider | ( | EpcX2SapProvider * | s | ) |
Set the X2 SAP this RRC should interact with.
s | the X2 SAP Provider to be used by this RRC entity |
Definition at line 1737 of file lte-enb-rrc.cc.
References m_x2SapProvider, and NS_LOG_FUNCTION.
set the callback used to forward data packets up the stack
cb |
Definition at line 2154 of file lte-enb-rrc.cc.
References m_forwardUpCallback.
void ns3::LteEnbRrc::SetLteAnrSapProvider | ( | LteAnrSapProvider * | s | ) |
set the ANR SAP this RRC should interact with
s | the ANR SAP Provider to be used by this RRC |
Definition at line 1807 of file lte-enb-rrc.cc.
References m_anrSapProvider, and NS_LOG_FUNCTION.
void ns3::LteEnbRrc::SetLteCcmRrcSapProvider | ( | LteCcmRrcSapProvider * | s | ) |
set the Component Carrier Management SAP this RRC should interact with
s | the Component Carrier Management SAP Provider to be used by this RRC |
Definition at line 1793 of file lte-enb-rrc.cc.
References m_ccmRrcSapProvider, and NS_LOG_FUNCTION.
void ns3::LteEnbRrc::SetLteEnbCmacSapProvider | ( | LteEnbCmacSapProvider * | s | ) |
set the CMAC SAP this RRC should interact with
s | the CMAC SAP Provider to be used by this RRC |
Definition at line 1751 of file lte-enb-rrc.cc.
References m_cmacSapProvider, and NS_LOG_FUNCTION.
void ns3::LteEnbRrc::SetLteEnbCmacSapProvider | ( | LteEnbCmacSapProvider * | s, |
uint8_t | pos | ||
) |
set the CMAC SAP this RRC should interact with
s | the CMAC SAP Provider to be used by this RRC |
pos | the position |
Definition at line 1758 of file lte-enb-rrc.cc.
References m_cmacSapProvider, and NS_LOG_FUNCTION.
void ns3::LteEnbRrc::SetLteEnbCphySapProvider | ( | LteEnbCphySapProvider * | s | ) |
set the CPHY SAP this RRC should use to interact with the PHY
s | the CPHY SAP Provider |
Definition at line 1884 of file lte-enb-rrc.cc.
References m_cphySapProvider, and NS_LOG_FUNCTION.
void ns3::LteEnbRrc::SetLteEnbCphySapProvider | ( | LteEnbCphySapProvider * | s, |
uint8_t | pos | ||
) |
set the CPHY SAP this RRC should use to interact with the PHY
s | the CPHY SAP Provider |
pos | the position |
Definition at line 1898 of file lte-enb-rrc.cc.
References m_cphySapProvider, and NS_LOG_FUNCTION.
void ns3::LteEnbRrc::SetLteEnbRrcSapUser | ( | LteEnbRrcSapUser * | s | ) |
set the RRC SAP this RRC should interact with
s | the RRC SAP User to be used by this RRC |
Definition at line 1850 of file lte-enb-rrc.cc.
References m_rrcSapUser, and NS_LOG_FUNCTION.
void ns3::LteEnbRrc::SetLteFfrRrcSapProvider | ( | LteFfrRrcSapProvider * | s | ) |
set the FFR SAP this RRC should interact with
s | the FFR SAP Provider to be used by this RRC |
Definition at line 1821 of file lte-enb-rrc.cc.
References m_ffrRrcSapProvider, and NS_LOG_FUNCTION.
void ns3::LteEnbRrc::SetLteFfrRrcSapProvider | ( | LteFfrRrcSapProvider * | s, |
uint8_t | index | ||
) |
set the FFR SAP this RRC should interact with
s | the FFR SAP Provider to be used by this RRC |
index | the index |
Definition at line 1828 of file lte-enb-rrc.cc.
References m_ffrRrcSapProvider, and NS_LOG_FUNCTION.
void ns3::LteEnbRrc::SetLteHandoverManagementSapProvider | ( | LteHandoverManagementSapProvider * | s | ) |
set the Handover Management SAP this RRC should interact with
s | the Handover Management SAP Provider to be used by this RRC |
Definition at line 1779 of file lte-enb-rrc.cc.
References m_handoverManagementSapProvider, and NS_LOG_FUNCTION.
void ns3::LteEnbRrc::SetLteMacSapProvider | ( | LteMacSapProvider * | s | ) |
set the MAC SAP provider.
The eNB RRC does not use this directly, but it needs to provide it to newly created RLC instances.
s | the MAC SAP provider that will be used by all newly created RLC instances |
Definition at line 1864 of file lte-enb-rrc.cc.
References m_macSapProvider, and NS_LOG_FUNCTION.
void ns3::LteEnbRrc::SetNumberOfComponentCarriers | ( | uint16_t | numberOfComponentCarriers | ) |
Set number of component carriers.
numberOfComponentCarriers | the number of component carriers |
Definition at line 2709 of file lte-enb-rrc.cc.
References m_numberOfComponentCarriers.
void ns3::LteEnbRrc::SetS1SapProvider | ( | EpcEnbS1SapProvider * | s | ) |
Set the S1 SAP Provider.
s | the S1 SAP Provider |
Definition at line 1871 of file lte-enb-rrc.cc.
References m_s1SapProvider.
void ns3::LteEnbRrc::SetSrsPeriodicity | ( | uint32_t | p | ) |
p | the SRS periodicity in num TTIs |
Definition at line 2735 of file lte-enb-rrc.cc.
References ns3::g_srsPeriodicity, m_srsCurrentPeriodicityId, NS_FATAL_ERROR, NS_LOG_FUNCTION, and ns3::SRS_ENTRIES.
Referenced by GetTypeId().
|
friend |
allow EnbRrcMemberLteEnbCmacSapUser class friend access
Definition at line 581 of file lte-enb-rrc.h.
|
friend |
allow MemberEpcEnbS1SapUser<LteEnbRrc> class friend access
Definition at line 593 of file lte-enb-rrc.h.
|
friend |
allow MemberLteEnbRrcSapProvider<LteEnbRrc> class friend access
Definition at line 591 of file lte-enb-rrc.h.
|
friend |
allow MemberLteAnrSapUser<LteEnbRrc> class friend access
Definition at line 585 of file lte-enb-rrc.h.
|
friend |
allow MemberLteCcmRrcSapUser<LteEnbRrc> class friend access
Definition at line 597 of file lte-enb-rrc.h.
|
friend |
allow MemberLteEnbRrcSapProvider<LteEnbRrc> class friend access
Definition at line 589 of file lte-enb-rrc.h.
|
friend |
allow MemberLteFfrRrcSapUser<LteEnbRrc> class friend access
Definition at line 587 of file lte-enb-rrc.h.
|
friend |
allow MemberLteHandoverManagementSapUser<LteEnbRrc> class friend access
Definition at line 583 of file lte-enb-rrc.h.
|
friend |
allow UeManager class friend access
Definition at line 595 of file lte-enb-rrc.h.
|
private |
The AdmitHandoverRequest
attribute.
Whether to admit an X2 handover request from another eNB.
Definition at line 1493 of file lte-enb-rrc.h.
Referenced by DoRecvHandoverRequest(), and GetTypeId().
|
private |
The AdmitRrcConnectionRequest
attribute.
Whether to admit a connection request from a UE.
Definition at line 1498 of file lte-enb-rrc.h.
Referenced by GetTypeId().
|
private |
List of measurement identities which are intended for ANR purpose.
Definition at line 1444 of file lte-enb-rrc.h.
Referenced by DoAddUeMeasReportConfigForAnr().
|
private |
Interface to the ANR instance.
Definition at line 1389 of file lte-enb-rrc.h.
Referenced by AddX2Neighbour(), DoTriggerHandover(), and SetLteAnrSapProvider().
|
private |
Receive API calls from the ANR instance.
Definition at line 1387 of file lte-enb-rrc.h.
Referenced by DoDispose(), GetLteAnrSapUser(), and LteEnbRrc().
|
private |
are carriers configured
Definition at line 1579 of file lte-enb-rrc.h.
Referenced by ConfigureCarriers().
|
private |
Interface to the LteEnbComponentCarrierManager instance.
Definition at line 1384 of file lte-enb-rrc.h.
Referenced by AddUe(), RemoveUe(), and SetLteCcmRrcSapProvider().
|
private |
Receive API calls from the LteEnbComponentCarrierManager instance.
Definition at line 1382 of file lte-enb-rrc.h.
Referenced by DoDispose(), GetLteCcmRrcSapUser(), and LteEnbRrc().
|
private |
Interface to the eNodeB MAC instance.
Definition at line 1374 of file lte-enb-rrc.h.
Referenced by ConfigureCarriers(), ConfigureCell(), DoRecvHandoverRequest(), LteEnbRrc(), RemoveUe(), SendSystemInformation(), and SetLteEnbCmacSapProvider().
|
private |
Receive API calls from the eNodeB MAC instance.
Definition at line 1372 of file lte-enb-rrc.h.
Referenced by ConfigureCarriers(), DoDispose(), GetLteEnbCmacSapUser(), and LteEnbRrc().
|
private |
List of measurement identities which are intended for component carrier management purposes.
Definition at line 1448 of file lte-enb-rrc.h.
Referenced by DoAddUeMeasReportConfigForComponentCarrier().
|
private |
component carrier phy configuration
Definition at line 1581 of file lte-enb-rrc.h.
Referenced by CellToComponentCarrierId(), ComponentCarrierToCellId(), ConfigureCarriers(), and SendSystemInformation().
|
private |
True if ConfigureCell() has been completed.
Definition at line 1415 of file lte-enb-rrc.h.
Referenced by ConfigureCell(), and SendHandoverRequest().
|
private |
The ConnectionEstablished
trace source.
Fired upon successful RRC connection establishment. Exporting IMSI, cell ID, and RNTI.
Definition at line 1555 of file lte-enb-rrc.h.
Referenced by GetTypeId().
|
private |
The ConnectionReconfiguration
trace source.
Fired upon RRC connection reconfiguration. Exporting IMSI, cell ID, and RNTI.
Definition at line 1560 of file lte-enb-rrc.h.
Referenced by GetTypeId().
|
private |
The ConnectionRejectedTimeoutDuration
attribute.
Time to wait between sending a RRC CONNECTION REJECT and destroying the UE context.
Definition at line 1529 of file lte-enb-rrc.h.
Referenced by GetTypeId().
|
private |
The ConnectionRequestTimeoutDuration
attribute.
After a RA attempt, if no RRC CONNECTION REQUEST is received before this time, the UE context is destroyed. Must account for reception of RAR and transmission of RRC CONNECTION REQUEST over UL GRANT.
Definition at line 1517 of file lte-enb-rrc.h.
Referenced by GetTypeId().
|
private |
The ConnectionSetupTimeoutDuration
attribute.
After accepting connection request, if no RRC CONNECTION SETUP COMPLETE is received before this time, the UE context is destroyed. Must account for the UE's reception of RRC CONNECTION SETUP and transmission of RRC CONNECTION SETUP COMPLETE.
Definition at line 1524 of file lte-enb-rrc.h.
Referenced by GetTypeId().
|
private |
Interface to the eNodeB PHY instances.
Definition at line 1412 of file lte-enb-rrc.h.
Referenced by ConfigureCarriers(), ConfigureCell(), LteEnbRrc(), RemoveUe(), SendSystemInformation(), SetCellId(), SetCsgId(), and SetLteEnbCphySapProvider().
|
private |
Receive API calls from the eNodeB PHY instances.
Definition at line 1410 of file lte-enb-rrc.h.
Referenced by ConfigureCarriers(), DoDispose(), GetLteEnbCphySapUser(), and LteEnbRrc().
|
private |
The DefaultTransmissionMode
attribute.
The default UEs' transmission mode (0: SISO).
Definition at line 1464 of file lte-enb-rrc.h.
Referenced by GetTypeId().
|
private |
Downlink transmission bandwidth configuration in number of Resource Blocks.
Definition at line 1421 of file lte-enb-rrc.h.
Referenced by ConfigureCell(), and DoRecvHandoverRequest().
|
private |
Downlink E-UTRA Absolute Radio Frequency Channel Number.
Definition at line 1417 of file lte-enb-rrc.h.
Referenced by ConfigureCell(), and DoRecvHandoverRequest().
|
private |
The EpsBearerToRlcMapping
attribute.
Specify which type of RLC will be used for each type of EPS bearer.
Definition at line 1469 of file lte-enb-rrc.h.
Referenced by GetRlcType(), and GetTypeId().
|
private |
List of measurement identities which are intended for FFR purpose.
Definition at line 1446 of file lte-enb-rrc.h.
Referenced by DoAddUeMeasReportConfigForFfr().
|
private |
Interface to the FFR algorithm instance.
Definition at line 1394 of file lte-enb-rrc.h.
Referenced by ConfigureCarriers(), ConfigureCell(), DoRecvLoadInformation(), LteEnbRrc(), and SetLteFfrRrcSapProvider().
|
private |
Receive API calls from the FFR algorithm instance.
Definition at line 1392 of file lte-enb-rrc.h.
Referenced by ConfigureCarriers(), DoDispose(), GetLteFfrRrcSapUser(), and LteEnbRrc().
forward up callback function
Definition at line 1364 of file lte-enb-rrc.h.
Referenced by SetForwardUpCallback().
|
private |
The HandoverEndOk
trace source.
Fired upon successful termination of a handover procedure. Exporting IMSI, cell ID, and RNTI.
Definition at line 1570 of file lte-enb-rrc.h.
Referenced by GetTypeId().
|
private |
The HandoverJoiningTimeoutDuration
attribute.
After accepting a handover request, if no RRC CONNECTION RECONFIGURATION COMPLETE is received before this time, the UE context is destroyed. Must account for reception of X2 HO REQ ACK by source eNB, transmission of the Handover Command, non-contention-based random access and reception of the RRC CONNECTION RECONFIGURATION COMPLETE message.
Definition at line 1538 of file lte-enb-rrc.h.
Referenced by GetTypeId().
|
private |
The HandoverLeavingTimeoutDuration
attribute.
After issuing a Handover Command, if neither RRC CONNECTION RE-ESTABLISHMENT nor X2 UE Context Release has been previously received, the UE context is destroyed.
Definition at line 1544 of file lte-enb-rrc.h.
Referenced by GetTypeId().
|
private |
Interface to the handover algorithm instance.
Definition at line 1379 of file lte-enb-rrc.h.
Referenced by SetLteHandoverManagementSapProvider().
|
private |
Receive API calls from the handover algorithm instance.
Definition at line 1377 of file lte-enb-rrc.h.
Referenced by DoDispose(), GetLteHandoverManagementSapUser(), and LteEnbRrc().
|
private |
List of measurement identities which are intended for handover purpose.
Definition at line 1442 of file lte-enb-rrc.h.
Referenced by DoAddUeMeasReportConfigForHandover().
|
private |
The HandoverStart
trace source.
Fired upon start of a handover procedure. Exporting IMSI, cell ID, RNTI, and target cell ID.
Definition at line 1565 of file lte-enb-rrc.h.
Referenced by GetTypeId().
|
private |
last allocated configuration index
Definition at line 1480 of file lte-enb-rrc.h.
Referenced by GetNewSrsConfigurationIndex().
|
private |
|
private |
Interface to the eNodeB MAC instance, to be used by RLC instances.
Definition at line 1402 of file lte-enb-rrc.h.
Referenced by SetLteMacSapProvider().
|
private |
The NewUeContext
trace source.
Fired upon creation of a new UE context. Exporting cell ID and RNTI.
Definition at line 1550 of file lte-enb-rrc.h.
Referenced by AddUe(), and GetTypeId().
|
private |
number of component carriers
Definition at line 1577 of file lte-enb-rrc.h.
Referenced by ConfigureCarriers(), DoDispose(), GetLteFfrRrcSapUser(), GetTypeId(), RemoveUe(), and SetNumberOfComponentCarriers().
|
private |
The QRxLevMin
attribute.
One of information transmitted within the SIB1 message, indicating the required minimum RSRP level that any UE must receive from this cell before it is allowed to camp to this cell.
Definition at line 1488 of file lte-enb-rrc.h.
Referenced by ConfigureCell(), and GetTypeId().
|
private |
reconfigure UEs?
Definition at line 1481 of file lte-enb-rrc.h.
|
private |
The RecvMeasurementReport
trace source.
Fired when measurement report is received. Exporting IMSI, cell ID, and RNTI.
Definition at line 1575 of file lte-enb-rrc.h.
Referenced by GetTypeId().
|
private |
Interface to receive messages from UE over the RRC protocol.
Definition at line 1399 of file lte-enb-rrc.h.
Referenced by DoDispose(), GetLteEnbRrcSapProvider(), and LteEnbRrc().
|
private |
Interface to send messages to UE over the RRC protocol.
Definition at line 1397 of file lte-enb-rrc.h.
Referenced by DoRecvHandoverRequest(), SendSystemInformation(), and SetLteEnbRrcSapUser().
|
private |
The RsrpFilterCoefficient
attribute.
Determines the strength of smoothing effect induced by layer 3 filtering of RSRP in all attached UE. If equals to 0, no layer 3 filtering is applicable.
Definition at line 1504 of file lte-enb-rrc.h.
Referenced by ConfigureCell(), and GetTypeId().
|
private |
The RsrqFilterCoefficient
attribute.
Determines the strength of smoothing effect induced by layer 3 filtering of RSRQ in all attached UE. If equals to 0, no layer 3 filtering is applicable.
Definition at line 1510 of file lte-enb-rrc.h.
Referenced by ConfigureCell(), and GetTypeId().
|
private |
Interface to send messages to core network over the S1 protocol.
Definition at line 1405 of file lte-enb-rrc.h.
Referenced by DoSendReleaseDataRadioBearer(), RemoveUe(), and SetS1SapProvider().
|
private |
Interface to receive messages from core network over the S1 protocol.
Definition at line 1407 of file lte-enb-rrc.h.
Referenced by DoDispose(), GetS1SapUser(), and LteEnbRrc().
|
private |
The System Information Block Type 1 that is currently broadcasted over BCH.
Definition at line 1428 of file lte-enb-rrc.h.
Referenced by ConfigureCell(), SetCellId(), and SetCsgId().
|
private |
The SrsPeriodicity
attribute.
The SRS periodicity in milliseconds.SRS current periodicity ID
Definition at line 1478 of file lte-enb-rrc.h.
Referenced by GetNewSrsConfigurationIndex(), GetSrsPeriodicity(), and SetSrsPeriodicity().
|
private |
The SystemInformationPeriodicity
attribute.
The interval for sending system information.
Definition at line 1474 of file lte-enb-rrc.h.
Referenced by GetTypeId(), and SendSystemInformation().
The UeMap
attribute.
List of UeManager by C-RNTI.
Definition at line 1433 of file lte-enb-rrc.h.
Referenced by AddUe(), DoDispose(), GetTypeId(), GetUeManager(), HasUeManager(), and RemoveUe().
|
private |
List of measurement configuration which are active in every UE attached to this eNodeB instance.
Definition at line 1439 of file lte-enb-rrc.h.
Referenced by AddUeMeasReportConfig(), and ConfigureCell().
|
private |
UE SRS configuration index set.
Definition at line 1479 of file lte-enb-rrc.h.
Referenced by GetNewSrsConfigurationIndex(), and RemoveSrsConfigurationIndex().
|
private |
Uplink transmission bandwidth configuration in number of Resource Blocks.
Definition at line 1423 of file lte-enb-rrc.h.
Referenced by ConfigureCell(), and DoRecvHandoverRequest().
|
private |
Uplink E-UTRA Absolute Radio Frequency Channel Number.
Definition at line 1419 of file lte-enb-rrc.h.
Referenced by ConfigureCell(), and DoRecvHandoverRequest().
|
private |
Interface to send messages to neighbour eNodeB over the X2 interface.
Definition at line 1369 of file lte-enb-rrc.h.
Referenced by DoRecvHandoverRequest(), DoSendLoadInformation(), and SetEpcX2SapProvider().
|
private |
Interface to receive messages from neighbour eNodeB over the X2 interface.
Definition at line 1367 of file lte-enb-rrc.h.
Referenced by DoDispose(), GetEpcX2SapUser(), and LteEnbRrc().
|
private |