Todo List

Module core

Move all Private and Impl classes to namespace ns3::impl?

Member GlobalRouteManagerImplTestCase::DoRun (void)

here we should do some verification of the routes built

Testing

Member ns3::A2A4RsrqHandoverAlgorithm::IsValidNeighbour (uint16_t cellId)

In the future, this function can be expanded to validate whether the neighbour cell is a valid target cell, e.g., taking into account the NRT in ANR and whether it is a CSG cell with closed access.

Member ns3::A2A4RsrqHandoverAlgorithm::UeMeasure::m_rsrp

Can be removed?

Member ns3::A3RsrpHandoverAlgorithm::IsValidNeighbour (uint16_t cellId)

In the future, this function can be expanded to validate whether the neighbour cell is a valid target cell, e.g., taking into account the NRT in ANR and whether it is a CSG cell with closed access.

Member ns3::AarfcdWifiManager::DoGetRtsTxVector (WifiRemoteStation *station)

we could/should implement the Aarf algorithm for RTS only by picking a single rate within the BasicRateSet.

Member ns3::AarfWifiManager::DoGetRtsTxVector (WifiRemoteStation *station)

we could/should implement the Aarf algorithm for RTS only by picking a single rate within the BasicRateSet.

Member ns3::AddPIHeader (uint8_t *&buf, size_t &len)

Consider having a instance member m_packetBuffer and using memmove instead of memcpy to add the PI header. It might be faster in this case to use memmove and avoid the extra mallocs.

Member ns3::AnimationInterface::CsmaMacRxTrace (std::string context, Ptr< const Packet > p)

NS_ASSERT (CsmaPacketIsPending (AnimUid) == true);

Member ns3::AnimationInterface::CsmaPhyRxEndTrace (std::string context, Ptr< const Packet > p)

NS_ASSERT (CsmaPacketIsPending (AnimUid) == true);

Member ns3::AnimationInterface::CsmaPhyTxEndTrace (std::string context, Ptr< const Packet > p)

NS_ASSERT (IsPacketPending (AnimUid) == true);

Member ns3::AnimationInterface::WavePhyRxBeginTrace (std::string context, Ptr< const Packet > p)

NS_ASSERT (WavePacketIsPending (animUid) == true);

Member ns3::AnimationInterface::WifiPhyRxBeginTrace (std::string context, Ptr< const Packet > p)

NS_ASSERT (WifiPacketIsPending (animUid) == true);

Member ns3::AodvHelper::Create (Ptr< Node > node) const

support installing AODV on the subset of all available IP interfaces

Member ns3::AparfWifiManager::DoGetRtsTxVector (WifiRemoteStation *station)

we could/should implement the Arf algorithm for RTS only by picking a single rate within the BasicRateSet.

Member ns3::ArfWifiManager::DoGetRtsTxVector (WifiRemoteStation *station)

we could/should implement the Arf algorithm for RTS only by picking a single rate within the BasicRateSet.

Member ns3::AsciiToIpv6Host (const char *address, uint8_t addr[16])

Handle IPv6 address with decimal value for last four bytes.

Member ns3::BSSchedulerSimple::Schedule (void)

Overflows but don't know how to fix

Member ns3::CaraWifiManager::DoGetRtsTxVector (WifiRemoteStation *station)

we could/should implement the Arf algorithm for RTS only by picking a single rate within the BasicRateSet.

Member ns3::CidFactory::FreeCid (Cid cid)

We need to update the cid bitmap properly here.

Member ns3::DistributedSimulatorImpl::GetMaximumSimulationTime (void) const

I am fairly certain other compilers use other non-standard post-fixes to indicate 64 bit constants.

Member ns3::dot11s::HwmpProtocolMac::ReceiveData (Ptr< Packet > packet, const WifiMacHeader &header)

address extension

Member ns3::dot11s::IePreq::AddDestinationAddressElement (bool doFlag, bool rfFlag, Mac48Address dest_address, uint32_t dest_seq_number)

check overflow

Member ns3::dot11s::IePreq::m_maxSize

make as an attribute

Member ns3::dot11s::PeerLinkCloseStart::GetFields () const

protocol version:

Member ns3::dot11s::PeerLinkConfirmStart::GetFields () const

protocol version:

Member ns3::dot11s::PeerLinkOpenStart::GetFields () const

protocol version:

Member ns3::dot11s::PeerManagementProtocol::GetAddress ()

this used by plugins only. Now MAC plugins can ask MP address directly from main MAC

Member ns3::dsdv::RoutingTable::Purge (std::map< Ipv4Address, RoutingTableEntry > &removedAddresses)

Need to decide when to invalidate a route

Member ns3::dsr::DsrErrorBuffer::Enqueue (DsrErrorBuffEntry &entry)

check the source and destination over here

Member ns3::dsr::DsrOptionRerr::Process (Ptr< Packet > packet, Ptr< Packet > dsrP, Ipv4Address ipv4Address, Ipv4Address source, Ipv4Header const &ipv4Header, uint8_t protocol, bool &isPromisc, Ipv4Address promiscSource)

This is for the other two error options, not supporting for now

Member ns3::dsr::DsrRouteCache::DecStability (Ipv4Address node)

remove it here

Member ns3::dsr::DsrRouteCache::DeleteAllRoutesIncludeLink (Ipv4Address errorSrc, Ipv4Address unreachNode, Ipv4Address node)

get rid of this one

Member ns3::dsr::DsrRouteCache::IncStability (Ipv4Address node)

get rid of the debug here

Member ns3::dsr::DsrRouteCache::PurgeMac ()

disable temporarily

Member ns3::dsr::DsrRouteCache::UpdateNetGraph ()

May need to set different weight for different link here later

Member ns3::dsr::DsrRouteCache::UseExtends (DsrRouteCacheEntry::IP_VECTOR rt)

remove after debug

Member ns3::dsr::DsrRouting::CheckSendBuffer ()

New DsrNetworkQueueEntry

Member ns3::dsr::DsrRouting::ForwardErrPacket (DsrOptionRerrUnreachHeader &rerr, DsrOptionSRHeader &sourceRoute, Ipv4Address nextHop, uint8_t protocol, Ptr< Ipv4Route > route)

New DsrNetworkQueueEntry

Member ns3::dsr::DsrRouting::SalvagePacket (Ptr< const Packet > packet, Ipv4Address source, Ipv4Address dst, uint8_t protocol)

New DsrNetworkQueueEntry

Member ns3::dsr::DsrRouting::SendAck (uint16_t ackId, Ipv4Address destination, Ipv4Address realSrc, Ipv4Address realDst, uint8_t protocol, Ptr< Ipv4Route > route)

New DsrNetworkQueueEntry

Member ns3::dsr::DsrRouting::SendPacket (Ptr< Packet > packet, Ipv4Address source, Ipv4Address nextHop, uint8_t protocol)

New DsrNetworkQueueEntry

Member ns3::dsr::DsrRouting::SendPacketFromBuffer (DsrOptionSRHeader const &sourceRoute, Ipv4Address nextHop, uint8_t protocol)

New DsrNetworkQueueEntry

Member ns3::dsr::DsrRouting::SendReply (Ptr< Packet > packet, Ipv4Address source, Ipv4Address nextHop, Ptr< Ipv4Route > route)

New DsrNetworkQueueEntry

Member ns3::dsr::DsrRouting::SendRequest (Ptr< Packet > packet, Ipv4Address source)

New DsrNetworkQueueEntry

Member ns3::dsr::DsrRouting::SendUnreachError (Ipv4Address unreachNode, Ipv4Address destination, Ipv4Address originalDst, uint8_t salvage, uint8_t protocol)

New DsrNetworkQueueEntry

Class ns3::EnbMemberLteEnbPhySapProvider

SetBandwidth() and SetCellId() can be removed.

Member ns3::EpcUeNas::m_stateTransitionCallback

This should be a TracedValue

Member ns3::EpcX2::DoSendUeData (EpcX2SapProvider::UeDataParams params)

This should be done in GtpuHeader

Member ns3::external_rand ()

make it random...

Member ns3::FdBetFfMacScheduler::DoSchedDlTriggerReq (const struct FfMacSchedSapProvider::SchedDlTriggerReqParameters &params)

check correct value according the DCIs txed

Member ns3::FdMtFfMacScheduler::DoSchedDlTriggerReq (const struct FfMacSchedSapProvider::SchedDlTriggerReqParameters &params)

check correct value according the DCIs txed

Member ns3::FdNetDevice::m_phyTxDropTrace

Remove: this TracedCallback is never invoked.

Member ns3::FdTbfqFfMacScheduler::DoSchedDlTriggerReq (const struct FfMacSchedSapProvider::SchedDlTriggerReqParameters &params)

check correct value according the DCIs txed

Member ns3::FlameStack::Report (const Ptr< MeshPointDevice > mp, std::ostream &)

report flame counters

Member ns3::FlameStack::ResetStats (const Ptr< MeshPointDevice > mp)

reset flame counters

Member ns3::GlobalRouteManagerImpl::DeleteGlobalRoutes ()

separate manually assigned static routes from static routes that the global routing code injects, and only delete the latter

Class ns3::Histogram

Add support for negative data.

Add method(s) to estimate parameters from the histogram, see http://www.dspguide.com/ch2/4.htm

Member ns3::Icmpv6L4Protocol::DoDAD (Ipv6Address target, Ptr< Ipv6Interface > interface)

disable multicast loopback to prevent NS probing to be received by the sender

Member ns3::Icmpv6L4Protocol::Forward (Ipv6Address source, Icmpv6Header icmp, uint32_t info, Ipv6Header ipHeader, const uint8_t payload[8])

assuming the ICMP is carrying a extensionless IP packet

Member ns3::Icmpv6L4Protocol::HandleRA (Ptr< Packet > p, Ipv6Address const &src, Ipv6Address const &dst, Ptr< Ipv6Interface > interface)

case of multiple prefix on single interface

Member ns3::Icmpv6L4Protocol::Receive (Ptr< Packet > p, Ipv6Header const &header, Ptr< Ipv6Interface > interface)

implement request / reply consistency check.

Member ns3::Icmpv6OptionHeader::Icmpv6OptionHeader ()

Member ns3::Ipv4GlobalRouting::LookupGlobal (Ipv4Address dest, Ptr< NetDevice > oif=0)

handle multi-address case

Member ns3::Ipv4Interface::Send (Ptr< Packet > p, const Ipv4Header &hdr, Ipv4Address dest)

additional checks needed here (such as whether multicast goes to loopback)?

Member ns3::Ipv6ExtensionAH::Process (Ptr< Packet > &packet, uint8_t offset, Ipv6Header const &ipv6Header, Ipv6Address dst, uint8_t *nextHeader, bool &stopProcessing, bool &isDropped, Ipv6L3Protocol::DropReason &dropReason)

Member ns3::Ipv6ExtensionAHHeader::Deserialize (Buffer::Iterator start)

Member ns3::Ipv6ExtensionAHHeader::GetSerializedSize () const

Member ns3::Ipv6ExtensionAHHeader::Print (std::ostream &os) const

Member ns3::Ipv6ExtensionAHHeader::Serialize (Buffer::Iterator start) const

Member ns3::Ipv6ExtensionESP::Process (Ptr< Packet > &packet, uint8_t offset, Ipv6Header const &ipv6Header, Ipv6Address dst, uint8_t *nextHeader, bool &stopProcessing, bool &isDropped, Ipv6L3Protocol::DropReason &dropReason)

Member ns3::Ipv6ExtensionESPHeader::Deserialize (Buffer::Iterator start)

Member ns3::Ipv6ExtensionESPHeader::GetSerializedSize () const

Member ns3::Ipv6ExtensionESPHeader::Print (std::ostream &os) const

Member ns3::Ipv6ExtensionESPHeader::Serialize (Buffer::Iterator start) const

Member ns3::Ipv6Interface::Send (Ptr< Packet > p, const Ipv6Header &hdr, Ipv6Address dest)

additional checks needed here (such as whether multicast goes to loopback)?

Member ns3::LteAnr::DoReportUeMeas (LteRrcSap::MeasResults measResults)

Remove neighbours in the NRT.

Member ns3::LteEnbPhy::GetTypeId (void)

In what unit is this?

In what unit is this?

Member ns3::LteEnbPhy::m_interferenceSamplePeriod

In what unit is this?

Member ns3::LteEnbRrc::ReceiveReportTracedCallback )(const uint64_t imsi, const uint16_t cellId, const uint16_t rnti, const LteRrcSap::MeasurementReport report)

The LteRrcSap::MeasurementReport argument should be changed to a const reference since the argument is large.

Member ns3::LteMacSapUser::NotifyHarqDeliveryFailure ()=0

eventual parameters to be defined

Member ns3::LteRlc::DoTransmitPdcpPdu (Ptr< Packet > p)=0

MRE What is the sense to duplicate all the interfaces here???

Member ns3::LteRlcAm::DoReceivePdu (Ptr< Packet > p, uint16_t rnti, uint8_t lcid)

stop and reset the t-Reordering

Member ns3::LteRlcAm::m_maxRetxThreshold

How these parameters are configured???

Member ns3::LteRlcAm::ReassembleAndDeliver (Ptr< Packet > packet)

What to do in this case? Discard packet and continue? Or Assert?

Member ns3::LteUeMac::DoReceiveLteControlMessage (Ptr< LteControlMessage > msg)

RRC generates the RecvRaResponse messaged for avoiding holes in transmission at PHY layer (which produce erroneous UL CQI evaluation)

Member ns3::LteUePhy::m_subframeNo

Can be removed.

Member ns3::LteUePhy::m_ueMeasurementsFilterLast

Can be removed.

Member ns3::LteUeRrc::ApplyRadioResourceConfigDedicated (LteRrcSap::RadioResourceConfigDedicated rrcd)

currently not implemented. Would need to modify drbInfo, and then propagate changes to the MAC

Member ns3::LteUeRrc::DoNotifyRandomAccessFailed ()

After a handover failure because of a random access failure, send an RRC Connection Re-establishment and switch to CONNECTED_REESTABLISHING state.

Member ns3::LteUeRrc::DoRecvRrcConnectionReestablishment (LteRrcSap::RrcConnectionReestablishment msg)

After receiving RRC Connection Re-establishment, stop timer T301, fire a new trace source, reply with RRC Connection Re-establishment Complete, and finally switch to CONNECTED_NORMALLY state. See Section 5.3.7.5 of 3GPP TS 36.331.

Member ns3::LteUeRrc::DoRecvRrcConnectionReestablishmentReject (LteRrcSap::RrcConnectionReestablishmentReject msg)

After receiving RRC Connection Re-establishment Reject, stop timer T301. See Section 5.3.7.8 of 3GPP TS 36.331.

Member ns3::LteUeRrc::DoRecvRrcConnectionRelease (LteRrcSap::RrcConnectionRelease msg)

Currently not implemented, see Section 5.3.8 of 3GPP TS 36.331.

Member ns3::LteUeRrc::MeasValues::timestamp

Should be removed.

Member ns3::LteUeRrc::SaveScellUeMeasurements (uint16_t cellId, double rsrp, double rsrq, bool useLayer3Filtering, uint16_t componentCarrierId)

Remove the useLayer3Filtering argument

Member ns3::LteUeRrc::SaveUeMeasurements (uint16_t cellId, double rsrp, double rsrq, bool useLayer3Filtering)

Remove the useLayer3Filtering argument

Member ns3::MacLow::AggregateToAmpdu (Ptr< const Packet > packet, const WifiMacHeader hdr)

We should also handle Ack and BlockAck

Member ns3::MacLow::CtsTimeout (void)

should check that there was no rx start before now. we should restart a new cts timeout now until the expected end of rx if there was a rx start before now.

Member ns3::MacLow::NormalAckTimeout (void)

should check that there was no rx start before now. we should restart a new ack timeout now until the expected end of rx if there was a rx start before now.

Member ns3::McpsDataIndicationCallback

for now, we do not deliver all of the parameters in section 7.1.1.3.1 but just send up the packet.

Member ns3::MeshHelper::ChannelPolicy

SetMeshId

Class ns3::MeshPointDevice

Member ns3::MeshPointDevice::DoSend (bool success, Ptr< Packet > packet, Mac48Address src, Mac48Address dst, uint16_t protocol, uint32_t iface)

diagnose routing errors

Member ns3::MeshWifiInterfaceMac::InstallPlugin (Ptr< MeshWifiInterfaceMacPlugin > plugin)

return unique ID to allow user to unregister plugins

Member ns3::MeshWifiInterfaceMac::Statistics::Print (std::ostream &os) const

txBeacons

Member ns3::MeshWifiInterfaceMac::SwitchFrequencyChannel (uint16_t new_id)

Correct channel switching is:

Class ns3::MeshWifiInterfaceMacPlugin

plugins description

Member ns3::MeshWifiInterfaceMacPlugin::Receive (Ptr< Packet > packet, const WifiMacHeader &header)=0

define when MAC call this

Member ns3::MeshWifiInterfaceMacPlugin::UpdateBeacon (MeshWifiBeacon &beacon) const =0

define when MAC call this

Member ns3::MeshWifiInterfaceMacPlugin::UpdateOutcomingFrame (Ptr< Packet > packet, WifiMacHeader &header, Mac48Address from, Mac48Address to)=0

define when MAC call this, preconditions & postconditions

Member ns3::NdiscCache::Entry::AddWaitingPacket (Ipv6PayloadHeaderPair p)

report packet as 'dropped'

Member ns3::NdiscCache::Entry::ClearWaitingPacket ()

report packets as 'dropped'

Member ns3::NscTcpSocketImpl::GetNativeNs3Errno (int err) const

better mapping?

this mapping isn't correct

Member ns3::olsr::MessageHeader::Hello::Print (std::ostream &os) const

Member ns3::olsr::MessageHeader::Hna::Print (std::ostream &os) const

Member ns3::olsr::MessageHeader::Mid::Print (std::ostream &os) const

Member ns3::olsr::MessageHeader::Print (std::ostream &os) const

Member ns3::olsr::MessageHeader::Tc::Print (std::ostream &os) const

Member ns3::olsr::PacketHeader::Print (std::ostream &os) const

Member ns3::olsr::RoutingProtocol::RouteInput (Ptr< const Packet > p, const Ipv4Header &header, Ptr< const NetDevice > idev, UnicastForwardCallback ucb, MulticastForwardCallback mcb, LocalDeliverCallback lcb, ErrorCallback ecb)

Implement IP aliasing and OLSR

Member ns3::olsr::RoutingProtocol::RouteOutput (Ptr< Packet > p, const Ipv4Header &header, Ptr< NetDevice > oif, Socket::SocketErrno &sockerr)

Implement IP aliasing and OLSR

Member ns3::OmnetDataOutput::Output (DataCollector &dc)

add timestamp to the runlevel

Member ns3::Packet::Deserialize (uint8_t const *buffer, uint32_t size)

Deserialize Tags

Member ns3::Packet::GetSerializedSize (void) const

Serialze Tags size

Member ns3::Packet::Serialize (uint8_t *buffer, uint32_t maxSize) const

Serialize Tags

Member ns3::ParfWifiManager::DoGetRtsTxVector (WifiRemoteStation *station)

we could/should implement the Arf algorithm for RTS only by picking a single rate within the BasicRateSet.

Member ns3::PendingData::SizeFromOffset (uint32_t offset)

should this return zero, or error out?

Member ns3::PfFfMacScheduler::DoSchedDlTriggerReq (const struct FfMacSchedSapProvider::SchedDlTriggerReqParameters &params)

check correct value according the DCIs txed

Member ns3::PhyReceptionStatParameters::TracedCallback )(const PhyReceptionStatParameters params)

The argument should be passed by const reference, since it's large.

Member ns3::PhyTransmissionStatParameters::TracedCallback )(const PhyTransmissionStatParameters params)

The argument should be passed by const reference, since it's large.

Member ns3::PssFfMacScheduler::DoSchedDlTriggerReq (const struct FfMacSchedSapProvider::SchedDlTriggerReqParameters &params)

check correct value according the DCIs txed

Member ns3::QueueDisc::Requeue (Ptr< QueueDiscItem > item)

netif_schedule (q);

Member ns3::QueueDisc::Run (void)

netif_schedule (q);

Member ns3::RedQueueDisc::DropEarly (Ptr< QueueDiscItem > item, uint32_t qSize)

Implement set bit to mark

Member ns3::RrFfMacScheduler::DoSchedDlTriggerReq (const struct FfMacSchedSapProvider::SchedDlTriggerReqParameters &params)

check correct value according the DCIs txed

Class ns3::SimulatorImpl

Define what the simulation or event context means.

Member ns3::SqliteDataOutput::Output (DataCollector &dc)

Better error reporting, management!

Member ns3::TcpGeneralTest::ErrorClose (SocketWho who)

indicate the error

Member ns3::TcpHeader::EnableChecksums (void)

currently has no effect

Member ns3::TcpL4Protocol::SendPacketV4 (Ptr< Packet > pkt, const TcpHeader &outgoing, const Ipv4Address &saddr, const Ipv4Address &daddr, Ptr< NetDevice > oif=0) const

UrgentPointer

Member ns3::TcpL4Protocol::SendPacketV6 (Ptr< Packet > pkt, const TcpHeader &outgoing, const Ipv6Address &saddr, const Ipv6Address &daddr, Ptr< NetDevice > oif=0) const

UrgentPointer

Member ns3::TdBetFfMacScheduler::DoSchedDlTriggerReq (const struct FfMacSchedSapProvider::SchedDlTriggerReqParameters &params)

check correct value according the DCIs txed

Member ns3::TdMtFfMacScheduler::DoSchedDlTriggerReq (const struct FfMacSchedSapProvider::SchedDlTriggerReqParameters &params)

check correct value according the DCIs txed

Member ns3::TdTbfqFfMacScheduler::DoSchedDlTriggerReq (const struct FfMacSchedSapProvider::SchedDlTriggerReqParameters &params)

check correct value according the DCIs txed

Class ns3::TestRunnerImpl

Move TestRunnerImpl to separate file.

Member ns3::Tlv::Deserialize (Buffer::Iterator start)

implement Deserialize HMAC_TUPLE

implement Deserialize MAC_VERSION_ENCODING

implement Deserialize CURRENT_TRANSMIT_POWER

implement Deserialize VENDOR_ID_EMCODING

implement Deserialize VENDOR_SPECIFIC_INFORMATION

Member ns3::TtaFfMacScheduler::DoSchedDlTriggerReq (const struct FfMacSchedSapProvider::SchedDlTriggerReqParameters &params)

check correct value according the DCIs txed

Member ns3::UanNetDevice::SetMtu (const uint16_t mtu)

Check this in MAC

Member ns3::UanPhyDual::SetSleepMode (bool sleep)

This method has to be implemented

Member ns3::UdpSocketImpl::~UdpSocketImpl ()

leave any multicast groups that have been joined

Class ns3::WallClockSynchronizer

Add more on jiffies, sleep, processes, etc.

Member ns3::WaveNetDevice::m_addressChange

The Address arguments should be passed by const reference, since they are large.

Member ns3::WifiPhy::m_phyMonitorSniffRxTrace

WifiTxVector and signalNoiseDbm should be be passed as const references because of their sizes.

Member ns3::WifiPhy::m_phyMonitorSniffTxTrace

WifiTxVector should be passed by const reference because of its size.

Member ns3::WifiPhy::MonitorSnifferRxCallback )(Ptr< const Packet > packet, uint16_t channelFreqMhz, WifiTxVector txVector, MpduInfo aMpdu, SignalNoiseDbm signalNoise)

WifiTxVector should be passed by const reference because of its size.

Member ns3::WifiPhy::MonitorSnifferTxCallback )(const Ptr< const Packet > packet, uint16_t channelFreqMhz, WifiTxVector txVector, MpduInfo aMpdu)

WifiTxVector should be passed by const reference because of its size.

Member ns3::WifiRemoteStationManager::GetControlAnswerMode (Mac48Address address, WifiMode reqMode)

Note that we're ignoring the last sentence for now, because there is not yet any manipulation here of PHY options.

Member ns3::WimaxNetDevice::m_traceRx

This member variable should be private.

Member ns3::WimaxNetDevice::m_traceTx

This member variable should be private.

Member PrintAllLogComponents (std::ostream &os)

Switch to a border-less table, so the file links align See http://www.stack.nl/~dimitri/doxygen/manual/htmlcmds.html

Member RandomVariableStreamLogNormalAntitheticTestCase::DoRun (void)

This test fails sometimes if the required tolerance is less than 3%, which may be because there is a bug in the implementation or that the mean of this distribution is more sensitive to its parameters than the others are.

Member RandomVariableStreamLogNormalTestCase::DoRun (void)

This test fails sometimes if the required tolerance is less than 3%, which may be because there is a bug in the implementation or that the mean of this distribution is more sensitive to its parameters than the others are.

Member RandomVariableStreamTestSuite::RandomVariableStreamTestSuite ()

This test is currently disabled because it fails sometimes. A possible reason for the failure is that the antithetic code is not implemented properly for this log-normal case.

This test is currently disabled because it fails sometimes. A possible reason for the failure is that the antithetic code is not implemented properly for this gamma case.

Module rip

: Add routing table compression (CIDR). The most evident result: without it a router will announce to be the default router and more RTEs, which is silly.

Module ripng

: Add routing table compression (CIDR). The most evident result: without it a router will announce to be the default router and more RTEs, which is silly.

Class StaWifiMacScanningTestCase

Add explicit association refusal test if ns-3 implemented it.

File test-string-value-formatting.cc

This should really be turned into a TestSuite