Introduction to Angular animationslink

Animation provides the illusion of motion: HTML elements change styling over time. Well-designed animations can make your application more fun and easier to use, but they aren't just cosmetic. Animations can improve your app and user experience in a number of ways:

• Without animations, web page transitions can seem abrupt and jarring.

• Motion greatly enhances the user experience, so animations give users a chance to detect the application's response to their actions.

• Good animations intuitively call the user's attention to where it is needed.

Typically, animations involve multiple style transformations over time. An HTML element can move, change color, grow or shrink, fade, or slide off the page. These changes can occur simultaneously or sequentially. You can control the timing of each transformation.

Angular's animation system is built on CSS functionality, which means you can animate any property that the browser considers animatable. This includes positions, sizes, transforms, colors, borders, and more. The W3C maintains a list of animatable properties on its CSS Transitions page.

About this guidelink

This guide covers the basic Angular animation features to get you started on adding Angular animations to your project.

The features described in this guide — and the more advanced features described in the related Angular animations guides — are demonstrated in an example app available as a live example / download example.

Prerequisiteslink

The guide assumes that you're familiar with building basic Angular apps, as described in the following sections:

• Tutorial
• Architecture Overview

Getting startedlink

The main Angular modules for animations are @angular/animations and @angular/platform-browser. When you create a new project using the CLI, these dependencies are automatically added to your project.

To get started with adding Angular animations to your project, import the animation-specific modules along with standard Angular functionality.

Step 1: Enabling the animations modulelink

Import BrowserAnimationsModule, which introduces the animation capabilities into your Angular root application module.

      
        content_copy
      
      import { NgModule } from '@angular/core';
import { BrowserModule } from '@angular/platform-browser';
import { BrowserAnimationsModule } from '@angular/platform-browser/animations';

@NgModule({
  imports: [
    BrowserModule,
    BrowserAnimationsModule
  ],
  declarations: [ ],
  bootstrap: [ ]
})
export class AppModule { }
    

Step 2: Importing animation functions into component fileslink

If you plan to use specific animation functions in component files, import those functions from @angular/animations.

      
        content_copy
      
      import { Component, HostBinding } from '@angular/core';
import {
  trigger,
  state,
  style,
  animate,
  transition,
  // ...
} from '@angular/animations';
    

Step 3: Adding the animation metadata propertylink

In the component file, add a metadata property called animations: within the @Component() decorator. You put the trigger that defines an animation within the animations metadata property.

      
        content_copy
      
      @Component({
  selector: 'app-root',
  templateUrl: 'app.component.html',
  styleUrls: ['app.component.css'],
  animations: [
    // animation triggers go here
  ]
})
    

Animating a simple transitionlink

Let's animate a simple transition that changes a single HTML element from one state to another. For example, you can specify that a button displays either Open or Closed based on the user's last action. When the button is in the open state, it's visible and yellow. When it's the closed state, it's transparent and green.

In HTML, these attributes are set using ordinary CSS styles such as color and opacity. In Angular, use the style() function to specify a set of CSS styles for use with animations. You can collect a set of styles in an animation state, and give the state a name, such as open or closed.

Animation state and styleslink

Use Angular's state() function to define different states to call at the end of each transition. This function takes two arguments: a unique name like open or closed and a style() function.

Use the style() function to define a set of styles to associate with a given state name. Note that the style attributes must be in camelCase.

Let's see how Angular's state() function works with the style⁣­(⁠) function to set CSS style attributes. In this code snippet, multiple style attributes are set at the same time for the state. In the open state, the button has a height of 200 pixels, an opacity of 1, and a background color of yellow.

      
        content_copy
      
      // ...
state('open', style({
  height: '200px',
  opacity: 1,
  backgroundColor: 'yellow'
})),
    

In the closed state, shown below, the button has a height of 100 pixels, an opacity of 0.5, and a background color of green.

      
        content_copy
      
      state('closed', style({
  height: '100px',
  opacity: 0.5,
  backgroundColor: 'green'
})),
    

Transitions and timinglink

In Angular, you can set multiple styles without any animation. However, without further refinement, the button instantly transforms with no fade, no shrinkage, or other visible indicator that a change is occurring.

To make the change less abrupt, we need to define an animation transition to specify the changes that occur between one state and another over a period of time. The transition() function accepts two arguments: the first argument accepts an expression that defines the direction between two transition states, and the second argument accepts an animate() function.

Use the animate() function to define the length, delay, and easing of a transition, and to designate the style function for defining styles while transitions are taking place. You can also use the animate() function to define the keyframes() function for multi-step animations. These definitions are placed in the second argument of the animate() function.

Animation metadata: duration, delay, and easinglink

The animate() function (second argument of the transition function) accepts the timings and styles input parameters.

The timings parameter takes a string defined in three parts.

animate ('duration delay easing')

The first part, duration, is required. The duration can be expressed in milliseconds as a simple number without quotes, or in seconds with quotes and a time specifier. For example, a duration of a tenth of a second can be expressed as follows:

• As a plain number, in milliseconds: 100

• In a string, as milliseconds: '100ms'

• In a string, as seconds: '0.1s'

The second argument, delay, has the same syntax as duration. For example:

• Wait for 100ms and then run for 200ms: '0.2s 100ms'

The third argument, easing, controls how the animation accelerates and decelerates during its runtime. For example, ease-in causes the animation to begin slowly, and to pick up speed as it progresses.

• Wait for 100ms, run for 200ms. Use a deceleration curve to start out fast and slowly decelerate to a resting point: '0.2s 100ms ease-out'

• Run for 200ms, with no delay. Use a standard curve to start slow, accelerate in the middle, and then decelerate slowly at the end: '0.2s ease-in-out'

• Start immediately, run for 200ms. Use a acceleration curve to start slow and end at full velocity: '0.2s ease-in'

This example provides a state transition from open to closed with a one second transition between states.

      
        content_copy
      
      transition('open => closed', [
  animate('1s')
]),
    

In the code snippet above, the => operator indicates unidirectional transitions, and <=> is bidirectional. Within the transition, animate() specifies how long the transition takes. In this case, the state change from open to closed takes one second, expressed here as 1s.

This example adds a state transition from the closed state to the open state with a 0.5 second transition animation arc.

      
        content_copy
      
      transition('closed => open', [
  animate('0.5s')
]),
    

Triggering the animationlink

An animation requires a trigger, so that it knows when to start. The trigger() function collects the states and transitions, and gives the animation a name, so that you can attach it to the triggering element in the HTML template.

The trigger() function describes the property name to watch for changes. When a change occurs, the trigger initiates the actions included in its definition. These actions can be transitions or other functions, as we'll see later on.

In this example, we'll name the trigger openClose, and attach it to the button element. The trigger describes the open and closed states, and the timings for the two transitions.

Defining animations and attaching them to the HTML templatelink

Animations are defined in the metadata of the component that controls the HTML element to be animated. Put the code that defines your animations under the animations: property within the @Component() decorator.

      
        content_copy
      
      @Component({
  selector: 'app-open-close',
  animations: [
    trigger('openClose', [
      // ...
      state('open', style({
        height: '200px',
        opacity: 1,
        backgroundColor: 'yellow'
      })),
      state('closed', style({
        height: '100px',
        opacity: 0.5,
        backgroundColor: 'green'
      })),
      transition('open => closed', [
        animate('1s')
      ]),
      transition('closed => open', [
        animate('0.5s')
      ]),
    ]),
  ],
  templateUrl: 'open-close.component.html',
  styleUrls: ['open-close.component.css']
})
export class OpenCloseComponent {
  isOpen = true;

  toggle() {
    this.isOpen = !this.isOpen;
  }

}
    

When you've defined an animation trigger for a component, you can attach it to an element in that component's template by wrapping the trigger name in brackets and preceding it with an @ symbol. Then, you can bind the trigger to a template expression using standard Angular property binding syntax as shown below, where triggerName is the name of the trigger, and expression evaluates to a defined animation state.

      
        content_copy
      
      <div [@triggerName]="expression">...</div>;
    

The animation is executed or triggered when the expression value changes to a new state.

The following code snippet binds the trigger to the value of the isOpen property.

      
        content_copy
      
      <div [@openClose]="isOpen ? 'open' : 'closed'" class="open-close-container">
  <p>The box is now {{ isOpen ? 'Open' : 'Closed' }}!</p>
</div>
    

In this example, when the isOpen expression evaluates to a defined state of open or closed, it notifies the trigger openClose of a state change. Then it's up to the openClose code to handle the state change and kick off a state change animation.

For elements entering or leaving a page (inserted or removed from the DOM), you can make the animations conditional. For example, use *ngIf with the animation trigger in the HTML template.

Code reviewlink

Here are the code files discussed in the transition example.

      
        content_copy
      
      
@Component({
  selector: 'app-open-close',
  animations: [
    trigger('openClose', [
      // ...
      state('open', style({
        height: '200px',
        opacity: 1,
        backgroundColor: 'yellow'
      })),
      state('closed', style({
        height: '100px',
        opacity: 0.5,
        backgroundColor: 'green'
      })),
      transition('open => closed', [
        animate('1s')
      ]),
      transition('closed => open', [
        animate('0.5s')
      ]),
    ]),
  ],
  templateUrl: 'open-close.component.html',
  styleUrls: ['open-close.component.css']
})
export class OpenCloseComponent {
  isOpen = true;
 
  toggle() {
    this.isOpen = !this.isOpen;
  }
 
}
    

Summarylink

You learned to add animation to a simple transition between two states, using style() and state() along with animate() for the timing.

You can learn about more advanced features in Angular animations under the Animation section, beginning with advanced techniques in transition and triggers.

Animations API summarylink

The functional API provided by the @angular/animations module provides a domain-specific language (DSL) for creating and controlling animations in Angular applications. See the API reference for a complete listing and syntax details of the core functions and related data structures.

More on Angular animationslink

You may also be interested in the following:

• Transition and triggers
• Complex animation sequences
• Reusable animations
• Route transition animations