salt.states.bigip¶

A state module designed to enforce load-balancing configurations for F5 Big-IP entities.

maturity: develop
platform: f5_bigip_11.6

salt.states.bigip.add_pool_member(hostname, username, password, name, member)¶

A function to connect to a bigip device and add a new member to an existing pool.

hostname: The host/address of the bigip device
username: The iControl REST username
password: The iControl REST password
name: The name of the pool to modify
member: The member to add to the pool

salt.states.bigip.create_monitor(hostname, username, password, monitor_type, name, **kwargs)¶

A function to connect to a bigip device and create a monitor.

hostname

The host/address of the bigip device

username

The iControl REST username

password

The iControl REST password

monitor_type

The type of monitor to create

name

The name of the monitor to create

kwargs

[ arg=val ] ...

Consult F5 BIGIP user guide for specific options for each monitor type. Typically, tmsh arg names are used.

salt.states.bigip.create_node(hostname, username, password, name, address)¶

Create a new node if it does not already exist.

hostname: The host/address of the bigip device
username: The iControl REST username
password: The iControl REST password
name: The name of the node to create
address: The address of the node

salt.states.bigip.create_pool(hostname, username, password, name, members=None, allow_nat=None, allow_snat=None, description=None, gateway_failsafe_device=None, ignore_persisted_weight=None, ip_tos_to_client=None, ip_tos_to_server=None, link_qos_to_client=None, link_qos_to_server=None, load_balancing_mode=None, min_active_members=None, min_up_members=None, min_up_members_action=None, min_up_members_checking=None, monitor=None, profiles=None, queue_depth_limit=None, queue_on_connection_limit=None, queue_time_limit=None, reselect_tries=None, service_down_action=None, slow_ramp_time=None)¶

Create a new node if it does not already exist.

hostname: The host/address of the bigip device
username: The iControl REST username
password: The iControl REST password
name: The name of the pool to create
members: List of members to be added to the pool
allow_nat: [yes | no]
allow_snat: [yes | no]
description: [string]
gateway_failsafe_device: [string]
ignore_persisted_weight: [enabled | disabled]
ip_tos_to_client: [pass-through | [integer]]
ip_tos_to_server: [pass-through | [integer]]
link_qos_to_client: [pass-through | [integer]]
link_qos_to_server: [pass-through | [integer]]
load_balancing_mode: [dynamic-ratio-member | dynamic-ratio-node | fastest-app-response | fastest-node | least-connections-members | least-connections-node | least-sessions | observed-member | observed-node | predictive-member | predictive-node | ratio-least-connections-member | ratio-least-connections-node | ratio-member | ratio-node | ratio-session | round-robin | weighted-least-connections-member | weighted-least-connections-node]
min_active_members: [integer]
min_up_members: [integer]
min_up_members_action: [failover | reboot | restart-all]
min_up_members_checking: [enabled | disabled]
monitor: [name]
profiles: [none | profile_name]
queue_depth_limit: [integer]
queue_on_connection_limit: [enabled | disabled]
queue_time_limit: [integer]
reselect_tries: [integer]
service_down_action: [drop | none | reselect | reset]
slow_ramp_time: [integer]

salt.states.bigip.create_profile(hostname, username, password, profile_type, name, **kwargs)¶

A function to connect to a bigip device and create a profile.

hostname

The host/address of the bigip device

username

The iControl REST username

password

The iControl REST password

profile_type

The type of profile to create

name

The name of the profile to create

kwargs

[ arg=val ] ...

Consult F5 BIGIP user guide for specific options for each profile type. Typically, tmsh arg names are used.

Special Characters |, , and : must be escaped using \ when used within strings.

salt.states.bigip.create_virtual(hostname, username, password, name, destination, pool=None, address_status=None, auto_lasthop=None, bwc_policy=None, cmp_enabled=None, connection_limit=None, dhcp_relay=None, description=None, fallback_persistence=None, flow_eviction_policy=None, gtm_score=None, ip_forward=None, ip_protocol=None, internal=None, twelve_forward=None, last_hop_pool=None, mask=None, mirror=None, nat64=None, persist=None, profiles=None, policies=None, rate_class=None, rate_limit=None, rate_limit_mode=None, rate_limit_dst=None, rate_limit_src=None, rules=None, related_rules=None, reject=None, source=None, source_address_translation=None, source_port=None, virtual_state=None, traffic_classes=None, translate_address=None, translate_port=None, vlans=None)¶

A function to connect to a bigip device and create a virtual server if it does not already exists.

hostname

The host/address of the bigip device

username

The iControl REST username

password

The iControl REST password

name

The name of the virtual to create

destination

[ [virtual_address_name:port] | [ipv4:port] | [ipv6.port] ]

pool

[ [pool_name] | none]

address_status

[yes | no]

auto_lasthop

[default | enabled | disabled ]

bwc_policy

[none] | string]

cmp_enabled

[yes | no]

dhcp_relay

[yes | no}

connection_limit

[integer]

description

[string]

state

[disabled | enabled]

fallback_persistence

[none | [profile name] ]

flow_eviction_policy

[none | [eviction policy name] ]

gtm_score

[integer]

ip_forward

[yes | no]

ip_protocol

[any | protocol]

internal

[yes | no]

twelve_forward(12-forward)

[yes | no]

last_hop-pool

[ [pool_name] | none]

mask

{ [ipv4] | [ipv6] }

mirror

{ [disabled | enabled | none] }

nat64

[enabled | disabled]

persist

[list]

profiles

[none | default | list ]

policies

[none | default | list ]

rate_class

[name]

rate_limit

[integer]

rate_limit-mode

rate_limit-dst

[integer]

rate_limit-src

[integer]

rules

[none | list ]

related_rules

[none | list ]

reject

[yes | no]

source

{ [ipv4[/prefixlen]] | [ipv6[/prefixlen]] }

source_address_translation

[none | snat:pool_name | lsn | automap | dictionary ]

source_port

[change | preserve | preserve-strict]

state

[enabled | disabled]

traffic_classes

[none | default | list ]

translate_address

[enabled | disabled]

translate_port

[enabled | disabled]

vlans

[none | default | dictionary]

vlan_ids: [ list]
enabled: [ true | false ]

salt.states.bigip.delete_monitor(hostname, username, password, monitor_type, name)¶

Modify an existing monitor. If it does exists, only the parameters specified will be enforced.

hostname

The host/address of the bigip device

username

The iControl REST username

password

The iControl REST password

monitor_type

The type of monitor to create

name

The name of the monitor to create

kwargs

[ arg=val ] ...

Consult F5 BIGIP user guide for specific options for each monitor type. Typically, tmsh arg names are used.

salt.states.bigip.delete_node(hostname, username, password, name)¶

Delete an existing node.

hostname: The host/address of the bigip device
username: The iControl REST username
password: The iControl REST password
name: The name of the node which will be deleted.

salt.states.bigip.delete_pool(hostname, username, password, name)¶

Delete an existing pool.

hostname: The host/address of the bigip device
username: The iControl REST username
password: The iControl REST password
name: The name of the pool which will be deleted

salt.states.bigip.delete_pool_member(hostname, username, password, name, member)¶

Delete an existing pool member.

hostname: The host/address of the bigip device
username: The iControl REST username
password: The iControl REST password
name: The name of the pool to be modified
member: The name of the member to delete from the pool

salt.states.bigip.delete_profile(hostname, username, password, profile_type, name)¶

Modify an existing profile. If it does exists, only the parameters specified will be enforced.

hostname

The host/address of the bigip device

username

The iControl REST username

password

The iControl REST password

profile_type

The type of profile to create

name

The name of the profile to create

kwargs

[ arg=val ] ...

Consult F5 BIGIP user guide for specific options for each profile type. Typically, tmsh arg names are used.

salt.states.bigip.delete_virtual(hostname, username, password, name)¶

Delete an existing virtual.

hostname: The host/address of the bigip device
username: The iControl REST username
password: The iControl REST password
name: The name of the virtual which will be deleted

salt.states.bigip.list_monitor(hostname, username, password, monitor_type, name)¶

A function to list an existing monitor.

hostname: The host/address of the bigip device
username: The iControl REST username
password: The iControl REST password
monitor_type: The type of monitor to list
name: The name of the monitor to list

salt.states.bigip.list_node(hostname, username, password, name)¶

A function to connect to a bigip device and list a specific node.

hostname: The host/address of the bigip device
username: The iControl REST username
password: The iControl REST password
name: The name of the node to list.

salt.states.bigip.list_pool(hostname, username, password, name)¶

A function to connect to a bigip device and list a specific pool.

hostname: The host/address of the bigip device
username: The iControl REST username
password: The iControl REST password
name: The name of the pool to list.

salt.states.bigip.list_profile(hostname, username, password, profile_type, name)¶

A function to list an existing profile.

hostname: The host/address of the bigip device
username: The iControl REST username
password: The iControl REST password
profile_type: The type of profile to list
name: The name of the profile to list

salt.states.bigip.list_virtual(hostname, username, password, name)¶

A function to list a specific virtual.

hostname: The host/address of the bigip device
username: The iControl REST username
password: The iControl REST password
name: The name of the virtual to list

salt.states.bigip.manage_monitor(hostname, username, password, monitor_type, name, **kwargs)¶

Create a new monitor if a monitor of this type and name does not already exists. If it does exists, only the parameters specified will be enforced.

hostname

The host/address of the bigip device

username

The iControl REST username

password

The iControl REST password

monitor_type

The type of monitor to create

name

The name of the monitor to create

kwargs

[ arg=val ] ...

Consult F5 BIGIP user guide for specific options for each monitor type. Typically, tmsh arg names are used.

salt.states.bigip.manage_node(hostname, username, password, name, address, connection_limit=None, description=None, dynamic_ratio=None, logging=None, monitor=None, rate_limit=None, ratio=None, session=None, node_state=None)¶

Manages a node of a given bigip device. If the node does not exist it will be created, otherwise, only the properties which are different than the existing will be updated.

hostname: The host/address of the bigip device
username: The iControl REST username
password: The iControl REST password
name: The name of the node to manage.
address: The address of the node
connection_limit: [integer]
description: [string]
dynam: c_ratio: [integer]
logging: [enabled | disabled]
monitor: [[name] | none | default]
rate_limit: [integer]
ratio: [integer]
session: [user-enabled | user-disabled]
node_state (state): [user-down | user-up ]

salt.states.bigip.manage_pool(hostname, username, password, name, allow_nat=None, allow_snat=None, description=None, gateway_failsafe_device=None, ignore_persisted_weight=None, ip_tos_to_client=None, ip_tos_to_server=None, link_qos_to_client=None, link_qos_to_server=None, load_balancing_mode=None, min_active_members=None, min_up_members=None, min_up_members_action=None, min_up_members_checking=None, monitor=None, profiles=None, queue_depth_limit=None, queue_on_connection_limit=None, queue_time_limit=None, reselect_tries=None, service_down_action=None, slow_ramp_time=None)¶

Create a new pool if it does not already exist. Pool members are managed separately. Only the parameters specified are enforced.

hostname: The host/address of the bigip device
username: The iControl REST username
password: The iControl REST password
name: The name of the pool to create
allow_nat: [yes | no]
allow_snat: [yes | no]
description: [string]
gateway_failsafe_device: [string]
ignore_persisted_weight: [enabled | disabled]
ip_tos_to_client: [pass-through | [integer]]
ip_tos_to_server: [pass-through | [integer]]
link_qos_to_client: [pass-through | [integer]]
link_qos_to_server: [pass-through | [integer]]
load_balancing_mode: [dynamic-ratio-member | dynamic-ratio-node | fastest-app-response | fastest-node | least-connections-members | least-connections-node | least-sessions | observed-member | observed-node | predictive-member | predictive-node | ratio-least-connections-member | ratio-least-connections-node | ratio-member | ratio-node | ratio-session | round-robin | weighted-least-connections-member | weighted-least-connections-node]
min_active_members: [integer]
min_up_members: [integer]
min_up_members_action: [failover | reboot | restart-all]
min_up_members_checking: [enabled | disabled]
monitor: [name]
profiles: [none | profile_name]
queue_depth_limit: [integer]
queue_on_connection_limit: [enabled | disabled]
queue_time_limit: [integer]
reselect_tries: [integer]
service_down_action: [drop | none | reselect | reset]
slow_ramp_time: [integer]

salt.states.bigip.manage_pool_members(hostname, username, password, name, members)¶

Manage the members of an existing pool. This function replaces all current pool members. Only the parameters specified are enforced.

hostname: The host/address of the bigip device
username: The iControl REST username
password: The iControl REST password
name: The name of the pool to modify
members: list of pool members to manage.

salt.states.bigip.manage_profile(hostname, username, password, profile_type, name, **kwargs)¶

Create a new profile if a monitor of this type and name does not already exists. If it does exists, only the parameters specified will be enforced.

hostname

The host/address of the bigip device

username

The iControl REST username

password

The iControl REST password

profile_type

The type of profile to create

name

The name of the profile to create

kwargs

[ arg=val ] ...

Consult F5 BIGIP user guide for specific options for each profile type. Typically, tmsh arg names are used.

salt.states.bigip.manage_virtual(hostname, username, password, name, destination, pool=None, address_status=None, auto_lasthop=None, bwc_policy=None, cmp_enabled=None, connection_limit=None, dhcp_relay=None, description=None, fallback_persistence=None, flow_eviction_policy=None, gtm_score=None, ip_forward=None, ip_protocol=None, internal=None, twelve_forward=None, last_hop_pool=None, mask=None, mirror=None, nat64=None, persist=None, profiles=None, policies=None, rate_class=None, rate_limit=None, rate_limit_mode=None, rate_limit_dst=None, rate_limit_src=None, rules=None, related_rules=None, reject=None, source=None, source_address_translation=None, source_port=None, virtual_state=None, traffic_classes=None, translate_address=None, translate_port=None, vlans=None)¶

Manage a virtual server. If a virtual does not exists it will be created, otherwise only the parameters specified will be enforced.

hostname

The host/address of the bigip device

username

The iControl REST username

password

The iControl REST password

name

The name of the virtual to create

destination

[ [virtual_address_name:port] | [ipv4:port] | [ipv6.port] ]

pool

[ [pool_name] | none]

address_status

[yes | no]

auto_lasthop

[default | enabled | disabled ]

bwc_policy

[none] | string]

cmp_enabled

[yes | no]

dhcp_relay

[yes | no}

connection_limit

[integer]

description

[string]

state

[disabled | enabled]

fallback_persistence

[none | [profile name] ]

flow_eviction_policy

[none | [eviction policy name] ]

gtm_score

[integer]

ip_forward

[yes | no]

ip_protocol

[any | protocol]

internal

[yes | no]

twelve_forward(12-forward)

[yes | no]

last_hop-pool

[ [pool_name] | none]

mask

{ [ipv4] | [ipv6] }

mirror

{ [disabled | enabled | none] }

nat64

[enabled | disabled]

persist

[list]

profiles

[none | default | list ]

policies

[none | default | list ]

rate_class

[name]

rate_limit

[integer]

rate_limit-mode

rate_limit-dst

[integer]

rate_limit-src

[integer]

rules

[none | list ]

related_rules

[none | list ]

reject

[yes | no]

source

{ [ipv4[/prefixlen]] | [ipv6[/prefixlen]] }

source_address_translation

[none | snat:pool_name | lsn | automap | dictionary ]

source_port

[change | preserve | preserve-strict]

state

[enabled | disabled]

traffic_classes

[none | default | list ]

translate_address

[enabled | disabled]

translate_port

[enabled | disabled]

vlans

[none | default | dictionary]

vlan_ids: [ list]
enabled: [ true | false ]

salt.states.bigip.modify_monitor(hostname, username, password, monitor_type, name, **kwargs)¶

Modify an existing monitor. If it does exists, only the parameters specified will be enforced.

hostname

The host/address of the bigip device

username

The iControl REST username

password

The iControl REST password

monitor_type

The type of monitor to create

name

The name of the monitor to create

kwargs

[ arg=val ] ...

Consult F5 BIGIP user guide for specific options for each monitor type. Typically, tmsh arg names are used.

salt.states.bigip.modify_node(hostname, username, password, name, connection_limit=None, description=None, dynamic_ratio=None, logging=None, monitor=None, rate_limit=None, ratio=None, session=None, node_state=None)¶

Modify an existing node. Only a node which already exists will be modified and only the parameters specified will be enforced.

hostname: The host/address of the bigip device
username: The iControl REST username
password: The iControl REST password
name: The name of the node to modify
connection_limit: [integer]
description: [string]
dynamic_ratio: [integer]
logging: [enabled | disabled]
monitor: [[name] | none | default]
rate_limit: [integer]
ratio: [integer]
session: [user-enabled | user-disabled]
node_state (state): [user-down | user-up ]

salt.states.bigip.modify_pool(hostname, username, password, name, allow_nat=None, allow_snat=None, description=None, gateway_failsafe_device=None, ignore_persisted_weight=None, ip_tos_to_client=None, ip_tos_to_server=None, link_qos_to_client=None, link_qos_to_server=None, load_balancing_mode=None, min_active_members=None, min_up_members=None, min_up_members_action=None, min_up_members_checking=None, monitor=None, profiles=None, queue_depth_limit=None, queue_on_connection_limit=None, queue_time_limit=None, reselect_tries=None, service_down_action=None, slow_ramp_time=None)¶

Modify an existing pool. Pool members are managed separately. Only the parameters specified are enforced.

hostname: The host/address of the bigip device
username: The iControl REST username
password: The iControl REST password
name: The name of the pool to create
allow_nat: [yes | no]
allow_snat: [yes | no]
description: [string]
gateway_failsafe_device: [string]
ignore_persisted_weight: [enabled | disabled]
ip_tos_to_client: [pass-through | [integer]]
ip_tos_to_server: [pass-through | [integer]]
link_qos_to_client: [pass-through | [integer]]
link_qos_to_server: [pass-through | [integer]]
load_balancing_mode: [dynamic-ratio-member | dynamic-ratio-node | fastest-app-response | fastest-node | least-connections-members | least-connections-node | least-sessions | observed-member | observed-node | predictive-member | predictive-node | ratio-least-connections-member | ratio-least-connections-node | ratio-member | ratio-node | ratio-session | round-robin | weighted-least-connections-member | weighted-least-connections-node]
min_active_members: [integer]
min_up_members: [integer]
min_up_members_action: [failover | reboot | restart-all]
min_up_members_checking: [enabled | disabled]
monitor: [name]
profiles: [none | profile_name]
queue_depth_limit: [integer]
queue_on_connection_limit: [enabled | disabled]
queue_time_limit: [integer]
reselect_tries: [integer]
service_down_action: [drop | none | reselect | reset]
slow_ramp_time: [integer]

salt.states.bigip.modify_pool_member(hostname, username, password, name, member, connection_limit=None, description=None, dynamic_ratio=None, inherit_profile=None, logging=None, monitor=None, priority_group=None, profiles=None, rate_limit=None, ratio=None, session=None, member_state=None)¶

A function to connect to a bigip device and modify a member of an existing pool.

hostname: The host/address of the bigip device
username: The iControl REST username
password: The iControl REST password
name: The name of the pool to modify
member: The member modify
connection_limit: [integer]
description: [string]
dynamic_ratio: [integer]
inherit_profile: [enabled | disabled]
logging: [enabled | disabled]
monitor: [name]
priority_group: [integer]
profiles: [none | profile_name]
rate_limit: [integer]
ratio: [integer]
session: [user-enabled | user-disabled]
member_state (state): [ user-up | user-down ]

salt.states.bigip.modify_profile(hostname, username, password, profile_type, name, **kwargs)¶

Modify an existing profile. If it does exists, only the parameters specified will be enforced.

hostname

The host/address of the bigip device

username

The iControl REST username

password

The iControl REST password

profile_type

The type of profile to create

name

The name of the profile to create

kwargs

[ arg=val ] ...

Consult F5 BIGIP user guide for specific options for each monitor type. Typically, tmsh arg names are used.

salt.states.bigip.modify_virtual(hostname, username, password, name, destination, pool=None, address_status=None, auto_lasthop=None, bwc_policy=None, cmp_enabled=None, connection_limit=None, dhcp_relay=None, description=None, fallback_persistence=None, flow_eviction_policy=None, gtm_score=None, ip_forward=None, ip_protocol=None, internal=None, twelve_forward=None, last_hop_pool=None, mask=None, mirror=None, nat64=None, persist=None, profiles=None, policies=None, rate_class=None, rate_limit=None, rate_limit_mode=None, rate_limit_dst=None, rate_limit_src=None, rules=None, related_rules=None, reject=None, source=None, source_address_translation=None, source_port=None, virtual_state=None, traffic_classes=None, translate_address=None, translate_port=None, vlans=None)¶

Modify an virtual server. modify an existing virtual. Only parameters specified will be enforced.

hostname

The host/address of the bigip device

username

The iControl REST username

password

The iControl REST password

name

The name of the virtual to create

destination

[ [virtual_address_name:port] | [ipv4:port] | [ipv6.port] ]

pool

[ [pool_name] | none]

address_status

[yes | no]

auto_lasthop

[default | enabled | disabled ]

bwc_policy

[none] | string]

cmp_enabled

[yes | no]

dhcp_relay

[yes | no}

connection_limit

[integer]

description

[string]

state

[disabled | enabled]

fallback_persistence

[none | [profile name] ]

flow_eviction_policy

[none | [eviction policy name] ]

gtm_score

[integer]

ip_forward

[yes | no]

ip_protocol

[any | protocol]

internal

[yes | no]

twelve_forward(12-forward)

[yes | no]

last_hop-pool

[ [pool_name] | none]

mask

{ [ipv4] | [ipv6] }

mirror

{ [disabled | enabled | none] }

nat64

[enabled | disabled]

persist

[list]

profiles

[none | default | list ]

policies

[none | default | list ]

rate_class

[name]

rate_limit

[integer]

rate_limit-mode

rate_limit_dst

[integer]

rate_limit_src

[integer]

rules

[none | list ]

related_rules

[none | list ]

reject

[yes | no]

source

{ [ipv4[/prefixlen]] | [ipv6[/prefixlen]] }

source_address_translation

[none | snat:pool_name | lsn | automap | dictionary ]

source_port

[change | preserve | preserve-strict]

state

[enabled | disabled]

traffic_classes

[none | default | list ]

translate_address

[enabled | disabled]

translate_port

[enabled | disabled]

vlans

[none | default | dictionary ]

vlan_ids: [ list]
enabled: [ true | false ]

Generated on June 18, 2020 at 04:09:58 UTC.

You are viewing docs for the latest stable release, 3001. Switch to docs for the previous stable release, 3000.3, or to a recent doc build from the master branch.

saltstack.com