Class yii\validators\ExistValidator

All Classes | Properties | Methods

Inheritance	yii\validators\ExistValidator » yii\validators\Validator » yii\base\Component » yii\base\BaseObject
Implements	yii\base\Configurable
Available since version	2.0
Source Code	https://github.com/yiisoft/yii2/blob/master/framework/validators/ExistValidator.php

ExistValidator validates that the attribute value exists in a table.

ExistValidator checks if the value being validated can be found in the table column specified by the ActiveRecord class $targetClass and the attribute $targetAttribute. Since version 2.0.14 you can use more convenient attribute $targetRelation

This validator is often used to verify that a foreign key contains a value that can be found in the foreign table.

The following are examples of validation rules using this validator:

// a1 needs to exist
['a1', 'exist']
// a1 needs to exist, but its value will use a2 to check for the existence
['a1', 'exist', 'targetAttribute' => 'a2']
// a1 and a2 need to exist together, and they both will receive error message
[['a1', 'a2'], 'exist', 'targetAttribute' => ['a1', 'a2']]
// a1 and a2 need to exist together, only a1 will receive error message
['a1', 'exist', 'targetAttribute' => ['a1', 'a2']]
// a1 needs to exist by checking the existence of both a2 and a3 (using a1 value)
['a1', 'exist', 'targetAttribute' => ['a2', 'a1' => 'a3']]
// type_id needs to exist in the column "id" in the table defined in ProductType class
['type_id', 'exist', 'targetClass' => ProductType::class, 'targetAttribute' => ['type_id' => 'id']],
// the same as the previous, but using already defined relation "type"
['type_id', 'exist', 'targetRelation' => 'type'],

Public Properties

Hide inherited properties

Property	Type	Description	Defined By
$allowArray	boolean	Whether to allow array type attribute.	yii\validators\ExistValidator
$attributeNames	array	Attribute names.	yii\validators\Validator
$attributes	array\|string	Attributes to be validated by this validator.	yii\validators\Validator
$behaviors	yii\base\Behavior[]	List of behaviors attached to this component	yii\base\Component
$builtInValidators	array	List of built-in validators (name => class or configuration)	yii\validators\Validator
$enableClientValidation	boolean	Whether to enable client-side validation for this validator.	yii\validators\Validator
$except	array\|string	Scenarios that the validator should not be applied to.	yii\validators\Validator
$filter	string\|array\|Closure	Additional filter to be applied to the DB query used to check the existence of the attribute value.	yii\validators\ExistValidator
$forceMasterDb	boolean	Whether this validator is forced to always use master DB	yii\validators\ExistValidator
$isEmpty	callable	A PHP callable that replaces the default implementation of isEmpty().	yii\validators\Validator
$message	string	The user-defined error message.	yii\validators\Validator
$on	array\|string	Scenarios that the validator can be applied to.	yii\validators\Validator
$skipOnEmpty	boolean	Whether this validation rule should be skipped if the attribute value is null or an empty string.	yii\validators\Validator
$skipOnError	boolean	Whether this validation rule should be skipped if the attribute being validated already has some validation error according to some previous rules.	yii\validators\Validator
$targetAttribute	string\|array	The name of the ActiveRecord attribute that should be used to validate the existence of the current attribute value.	yii\validators\ExistValidator
$targetAttributeJunction	string	And\|or define how target attributes are related	yii\validators\ExistValidator
$targetClass	string	The name of the ActiveRecord class that should be used to validate the existence of the current attribute value.	yii\validators\ExistValidator
$targetRelation	string	The name of the relation that should be used to validate the existence of the current attribute value This param overwrites $targetClass and $targetAttribute	yii\validators\ExistValidator
$validationAttributes	array	List of attribute names.	yii\validators\Validator
$when	callable	A PHP callable whose return value determines whether this validator should be applied.	yii\validators\Validator
$whenClient	string	A JavaScript function name whose return value determines whether this validator should be applied on the client-side.	yii\validators\Validator

Public Methods

Hide inherited methods

Method	Description	Defined By
__call()	Calls the named method which is not a class method.	yii\base\Component
__clone()	This method is called after the object is created by cloning an existing one.	yii\base\Component
__construct()	Constructor.	yii\base\BaseObject
__get()	Returns the value of a component property.	yii\base\Component
__isset()	Checks if a property is set, i.e. defined and not null.	yii\base\Component
__set()	Sets the value of a component property.	yii\base\Component
__unset()	Sets a component property to be null.	yii\base\Component
addError()	Adds an error about the specified attribute to the model object.	yii\validators\Validator
attachBehavior()	Attaches a behavior to this component.	yii\base\Component
attachBehaviors()	Attaches a list of behaviors to the component.	yii\base\Component
behaviors()	Returns a list of behaviors that this component should behave as.	yii\base\Component
canGetProperty()	Returns a value indicating whether a property can be read.	yii\base\Component
canSetProperty()	Returns a value indicating whether a property can be set.	yii\base\Component
className()	Returns the fully qualified name of this class.	yii\base\BaseObject
clientValidateAttribute()	Returns the JavaScript needed for performing client-side validation.	yii\validators\Validator
createValidator()	Creates a validator object.	yii\validators\Validator
detachBehavior()	Detaches a behavior from the component.	yii\base\Component
detachBehaviors()	Detaches all behaviors from the component.	yii\base\Component
ensureBehaviors()	Makes sure that the behaviors declared in behaviors() are attached to this component.	yii\base\Component
getAttributeNames()	Returns cleaned attribute names without the `!` character at the beginning.	yii\validators\Validator
getBehavior()	Returns the named behavior object.	yii\base\Component
getBehaviors()	Returns all behaviors attached to this component.	yii\base\Component
getClientOptions()	Returns the client-side validation options.	yii\validators\Validator
getValidationAttributes()	Returns a list of attributes this validator applies to.	yii\validators\Validator
hasEventHandlers()	Returns a value indicating whether there is any handler attached to the named event.	yii\base\Component
hasMethod()	Returns a value indicating whether a method is defined.	yii\base\Component
hasProperty()	Returns a value indicating whether a property is defined for this component.	yii\base\Component
init()	Initializes the object.	yii\validators\ExistValidator
isActive()	Returns a value indicating whether the validator is active for the given scenario and attribute.	yii\validators\Validator
isEmpty()	Checks if the given value is empty.	yii\validators\Validator
off()	Detaches an existing event handler from this component.	yii\base\Component
on()	Attaches an event handler to an event.	yii\base\Component
trigger()	Triggers an event.	yii\base\Component
validate()	Validates a given value.	yii\validators\Validator
validateAttribute()	Validates a single attribute.	yii\validators\ExistValidator
validateAttributes()	Validates the specified object.	yii\validators\Validator

Protected Methods

Hide inherited methods

Method	Description	Defined By
createQuery()	Creates a query instance with the given condition.	yii\validators\ExistValidator
formatMessage()	Formats a mesage using the I18N, or simple strtr if `\Yii::$app` is not available.	yii\validators\Validator
validateValue()	Validates a value.	yii\validators\ExistValidator

Property Details

$allowArray public property

Whether to allow array type attribute.

public boolean $allowArray = false

$filter public property

Additional filter to be applied to the DB query used to check the existence of the attribute value. This can be a string or an array representing the additional query condition (refer to yii\db\Query::where() on the format of query condition), or an anonymous function with the signature function ($query), where $query is the Query object that you can modify in the function.

public string|array|Closure $filter = null

$forceMasterDb public property (available since version 2.0.14)

Whether this validator is forced to always use master DB

public boolean $forceMasterDb = true

$targetAttribute public property

The name of the ActiveRecord attribute that should be used to validate the existence of the current attribute value. If not set, it will use the name of the attribute currently being validated. You may use an array to validate the existence of multiple columns at the same time. The array key is the name of the attribute with the value to validate, the array value is the name of the database field to search.

public string|array $targetAttribute = null

$targetAttributeJunction public property (available since version 2.0.11)

And|or define how target attributes are related

public string $targetAttributeJunction = 'and'

$targetClass public property

The name of the ActiveRecord class that should be used to validate the existence of the current attribute value. If not set, it will use the ActiveRecord class of the attribute being validated.

Method Details

createQuery() protected method

Creates a query instance with the given condition.

protected yii\db\ActiveQueryInterface createQuery ( $targetClass, $condition )
$targetClass	string	The target AR class
$condition	mixed	Query condition
return	yii\db\ActiveQueryInterface	The query instance

init() public method

Initializes the object.

This method is invoked at the end of the constructor after the object is initialized with the given configuration.

public void init ( )

validateAttribute() public method

Validates a single attribute.

Child classes must implement this method to provide the actual validation logic.

public void validateAttribute ( $model, $attribute )
$model	yii\base\Model	The data model to be validated
$attribute	string	The name of the attribute to be validated.

validateValue() protected method

Validates a value.

A validator class can implement this method to support data validation out of the context of a data model.

protected array\|null validateValue ( $value )
$value	mixed	The data value to be validated.
return	array\|null	The error message and the array of parameters to be inserted into the error message. `php if (!$valid) { `return [$this->message, [ 'param1' => $this->param1, 'formattedLimit' => Yii::$app->formatter->asShortSize($this->getSizeLimit()), 'mimeTypes' => implode(', ', $this->mimeTypes), 'param4' => 'etc...', ]];` } return null; ` for this example `message` template can contain `{param1}`, `{formattedLimit}`, `{mimeTypes}`, `{param4}` Null should be returned if the data is valid.
throws	yii\base\NotSupportedException	if the validator does not supporting data validation without a model

User Contributed Notes