ConsoleRead

Console Read

This example for a Yún device reads data coming from Bridge using Console.read() and stores it in a string.

To see the Console, pick your Yún's name and IP address in the Port menu then open the Serial Monitor. You can also see it by opening a terminal window and typing: ssh root@ yourYunsName.local 'telnet localhost 6571' then pressing enter. When prompted for the password, enter it.

When running this example, make sure your computer is on the same network as the Yún device.

Hardware Required

Yún board or shield
computer and Yún device on the same wireless network

Circuit

There is no circuit for this example.

image developed using Fritzing. For more circuit examples, see the Fritzing project page

Code

Include the Console library, which inherits from Bridge.
#include <Console.h>

Create a string to hold the information from the Bridge
String name;

In setup() initialize the Bridge and Console. Wait for a Console connection, then ask for some information :

void setup() {
Bridge.begin();
Console.begin();

while (!Console);

Console.println("Hi, what's your name?");
}

[Get Code]

In loop(), check to see if there are bytes in the Console buffer. If there's something available, read the the oldest character into a local variable.

void loop() {
if (Console.available() > 0) {
char c = Console.read();

[Get Code]

If the character is a newline ("\n"), it is the last character in the incoming string. Print out the string to the Console, ask for more information, and clear the string.

if (c == '\n') {
Console.print("Hi ");
Console.print(name);
Console.println("! Nice to meet you!");
Console.println();
Console.println("Hi, what's your name?");
name = "";
}
}

[Get Code]

If the character in the buffer is not a newline, add it to the end of the string.

else {
name += c;
}
}
}

[Get Code]

The complete sketch is below :

/*
Console Read example for YunShield/Yún

Read data coming from bridge using the Console.read() function
and store it in a string.

To see the Console, pick your Yún's name and IP address in the Port menu
then open the Port Monitor. You can also see it by opening a terminal window
and typing:
ssh root@ yourYunsName.local 'telnet localhost 6571'
then pressing enter. When prompted for the password, enter it.

created 13 Jun 2013
by Angelo Scialabba
modified 16 June 2013
by Tom Igoe

This example code is in the public domain.

http://www.arduino.cc/en/Tutorial/ConsoleRead

*/

#include <Console.h>

String name;

void setup() {
// Initialize Console and wait for port to open:
Bridge.begin();
Console.begin();

// Wait for Console port to connect
while (!Console);

Console.println("Hi, what's your name?");
}

void loop() {
if (Console.available() > 0) {
char c = Console.read(); // read the next char received
// look for the newline character, this is the last character in the string
if (c == '\n') {
//print text with the name received
Console.print("Hi ");
Console.print(name);
Console.println("! Nice to meet you!");
Console.println();
// Ask again for name and clear the old name
Console.println("Hi, what's your name?");
name = ""; // clear the name string
} else { // if the buffer is empty Cosole.read() returns -1
name += c; // append the read char from Console to the name string
}
} else {
delay(100);
}
}

[Get Code]

Console Read

Hardware Required

Circuit

Code

See Also

Privacy consent

Confirm your email address

Newsletter