Home Classes Methods

In Files

rubygems/requirement.rb
rubygems/version.rb

Included Modules

Comparable

Class/Module Index

Version

The Version class processes string versions into comparable values. A version string should normally be a series of numbers separated by periods. Each part (digits separated by periods) is considered its own number, and these are used for sorting. So for instance, 3.10 sorts higher than 3.2 because ten is greater than two.

If any part contains letters (currently only a-z are supported) then that version is considered prerelease. Versions with a prerelease part in the Nth part sort less than versions with N-1 parts. Prerelease parts are sorted alphabetically using the normal Ruby string sorting rules. If a prerelease part contains both letters and numbers, it will be broken into multiple parts to provide expected sort behavior (1.0.a10 becomes 1.0.a.10, and is greater than 1.0.a9).

Prereleases sort between real releases (newest to oldest):

1.0
1.0.b1
1.0.a.2
0.9

How Software Changes¶ ↑

Users expect to be able to specify a version constraint that gives them some reasonable expectation that new versions of a library will work with their software if the version constraint is true, and not work with their software if the version constraint is false. In other words, the perfect system will accept all compatible versions of the library and reject all incompatible versions.

Libraries change in 3 ways (well, more than 3, but stay focused here!).

The change may be an implementation detail only and have no effect on the client software.
The change may add new features, but do so in a way that client software written to an earlier version is still compatible.
The change may change the public interface of the library in such a way that old software is no longer compatible.

Some examples are appropriate at this point. Suppose I have a Stack class that supports a push and a pop method.

Examples of Category 1 changes:¶ ↑

Switch from an array based implementation to a linked-list based implementation.
Provide an automatic (and transparent) backing store for large stacks.

Examples of Category 2 changes might be:¶ ↑

Add a depth method to return the current depth of the stack.
Add a top method that returns the current top of stack (without changing the stack).
Change push so that it returns the item pushed (previously it had no usable return value).

Examples of Category 3 changes might be:¶ ↑

Changes pop so that it no longer returns a value (you must use top to get the top of the stack).
Rename the methods to push_item and pop_item.

RubyGems Rational Versioning¶ ↑

Versions shall be represented by three non-negative integers, separated by periods (e.g. 3.1.4). The first integers is the “major” version number, the second integer is the “minor” version number, and the third integer is the “build” number.
A category 1 change (implementation detail) will increment the build number.
A category 2 change (backwards compatible) will increment the minor version number and reset the build number.
A category 3 change (incompatible) will increment the major build number and reset the minor and build numbers.
Any “public” release of a gem should have a different version. Normally that means incrementing the build number. This means a developer can generate builds all day long for himself, but as soon as he/she makes a public release, the version must be updated.

Examples¶ ↑

Let’s work through a project lifecycle using our Stack example from above.

Version 0.0.1: The initial Stack class is release.
Version 0.0.2: Switched to a linked=list implementation because it is cooler.
Version 0.1.0: Added a depth method.
Version 1.0.0: Added top and made pop return nil (pop used to return the old top item).
Version 1.1.0: push now returns the value pushed (it used it return nil).
Version 1.1.1: Fixed a bug in the linked list implementation.
Version 1.1.2: Fixed a bug introduced in the last fix.

Client A needs a stack with basic push/pop capability. He writes to the original interface (no top), so his version constraint looks like:

gem 'stack', '~> 0.0'

Essentially, any version is OK with Client A. An incompatible change to the library will cause him grief, but he is willing to take the chance (we call Client A optimistic).

Client B is just like Client A except for two things: (1) He uses the depth method and (2) he is worried about future incompatibilities, so he writes his version constraint like this:

gem 'stack', '~> 0.1'

The depth method was introduced in version 0.1.0, so that version or anything later is fine, as long as the version stays below version 1.0 where incompatibilities are introduced. We call Client B pessimistic because he is worried about incompatible future changes (it is OK to be pessimistic!).

Preventing Version Catastrophe:¶ ↑

From: blog.zenspider.com/2008/10/rubygems-howto-preventing-cata.html

Let’s say you’re depending on the fnord gem version 2.y.z. If you specify your dependency as “>= 2.0.0” then, you’re good, right? What happens if fnord 3.0 comes out and it isn’t backwards compatible with 2.y.z? Your stuff will break as a result of using “>=”. The better route is to specify your dependency with a “spermy” version specifier. They’re a tad confusing, so here is how the dependency specifiers work:

Specification From  ... To (exclusive)
">= 3.0"      3.0   ... &infin;
"~> 3.0"      3.0   ... 4.0
"~> 3.0.0"    3.0.0 ... 3.1
"~> 3.5"      3.5   ... 4.0
"~> 3.5.0"    3.5.0 ... 3.6

Public Class Methods

correct?(version) click to toggle source

True if the version string matches RubyGems’ requirements.

 
               # File rubygems/version.rb, line 160
def self.correct? version
  version.to_s =~ ANCHORED_VERSION_PATTERN
end

create(input) click to toggle source

Factory method to create a Version object. Input may be a Version or a String. Intended to simplify client code.

ver1 = Version.create('1.3.17')   # -> (Version object)
ver2 = Version.create(ver1)       # -> (ver1)
ver3 = Version.create(nil)        # -> nil

 
               # File rubygems/version.rb, line 172
def self.create input
  if input.respond_to? :version then
    input
  elsif input.nil? then
    nil
  else
    new input
  end
end

new(version) click to toggle source

Constructs a Version from the version string. A version string is a series of digits or ASCII letters separated by dots.

 
               # File rubygems/version.rb, line 186
def initialize version
  raise ArgumentError, "Malformed version number string #{version}" unless
    self.class.correct?(version)

  @version = version.to_s
  @version.strip!
end

Public Instance Methods

<=>(other) click to toggle source

Compares this version with other returning -1, 0, or 1 if the other version is larger, the same, or smaller than this one. Attempts to compare to something that’s not a Gem::Version return nil.

 
               # File rubygems/version.rb, line 303
def <=> other
  return unless Gem::Version === other
  return 0 if @version == other.version

  lhsegments = segments
  rhsegments = other.segments

  lhsize = lhsegments.size
  rhsize = rhsegments.size
  limit  = (lhsize > rhsize ? lhsize : rhsize) - 1

  i = 0

  while i <= limit
    lhs, rhs = lhsegments[i] || 0, rhsegments[i] || 0
    i += 1

    next      if lhs == rhs
    return -1 if String  === lhs && Numeric === rhs
    return  1 if Numeric === lhs && String  === rhs

    return lhs <=> rhs
  end

  return 0
end

bump() click to toggle source

Return a new version object where the next to the last revision number is one greater (e.g., 5.3.1 => 5.4).

Pre-release (alpha) parts, e.g, 5.3.1.b.2 => 5.4, are ignored.

 
               # File rubygems/version.rb, line 200
def bump
  segments = self.segments.dup
  segments.pop while segments.any? { |s| String === s }
  segments.pop if segments.size > 1

  segments[-1] = segments[-1].succ
  self.class.new segments.join(".")
end

eql?(other) click to toggle source

A Version is only eql? to another version if it’s specified to the same precision. Version “1.0” is not the same as version “1”.

 
               # File rubygems/version.rb, line 213
def eql? other
  self.class === other and @version == other.version
end

marshal_dump() click to toggle source

Dump only the raw version string, not the complete object. It’s a string for backwards (RubyGems 1.3.5 and earlier) compatibility.

 
               # File rubygems/version.rb, line 233
def marshal_dump
  [version]
end

marshal_load(array) click to toggle source

Load custom marshal format. It’s a string for backwards (RubyGems 1.3.5 and earlier) compatibility.

 
               # File rubygems/version.rb, line 241
def marshal_load array
  initialize array[0]
end

prerelease?() click to toggle source

A version is considered a prerelease if it contains a letter.

 
               # File rubygems/version.rb, line 254
def prerelease?
  @prerelease ||= @version =~ /[a-zA-Z]/
end

release() click to toggle source

The release for this version (e.g. 1.2.0.a -> 1.2.0). Non-prerelease versions return themselves.

 
               # File rubygems/version.rb, line 266
def release
  return self unless prerelease?

  segments = self.segments.dup
  segments.pop while segments.any? { |s| String === s }
  self.class.new segments.join('.')
end

spermy_recommendation() click to toggle source

A recommended version for use with a ~> Requirement.

 
               # File rubygems/version.rb, line 287
def spermy_recommendation
  segments = self.segments.dup

  segments.pop    while segments.any? { |s| String === s }
  segments.pop    while segments.size > 2
  segments.push 0 while segments.size < 2

  "~> #{segments.join(".")}"
end

yaml_initialize(tag, map) click to toggle source

 
               # File rubygems/version.rb, line 245
def yaml_initialize(tag, map)
  @version = map['version']
  @segments = nil
  @hash = nil
end

Commenting is here to help enhance the documentation. For example, code samples, or clarification of the documentation.

If you have questions about Ruby or the documentation, please post to one of the Ruby mailing lists. You will get better, faster, help that way.

If you wish to post a correction of the docs, please do so, but also file bug report so that it can be corrected for the next release. Thank you.

If you want to help improve the Ruby documentation, please visit Documenting-ruby.org.