config.rb

[edit on GitHub]

Warning

The config.rb file is a replacement for the knife.rb file, starting with the chef-client 12.0 release. The config.rb file has identical settings and behavior to the knife.rb file. The chef-client will first look for the presence of the config.rb file and if it is not found, will look for the knife.rb file.

A config.rb file is used to specify configuration details for knife.

A config.rb file:

  • Is loaded every time the knife executable is run
  • The default location in which the chef-client expects to find this file is ~/.chef/config.rb; use the --config option from the command line to change this location
  • Is not created by default
  • Is located by default at ~/.chef/config.rb (UNIX and Linux platforms) or c:\Users\username\.chef (Microsoft Windows platform, use the --config option from the command line to change this location
  • Will override the default configuration when a config.rb file exists at the default path or the path specified by the --config option

Note

When running Microsoft Windows, the config.rb file is located at %HOMEDRIVE%:%HOMEPATH%\.chef (e.g. c:\Users\<username>\.chef). If this path needs to be scripted, use %USERPROFILE%\chef-repo\.chef.

Settings

This configuration file has the following settings:

bootstrap_template
The path to a template file to be used during a bootstrap operation.
chef_server_url

The URL for the Chef server. For example:

chef_server_url 'https://localhost/organizations/ORG_NAME'
chef_zero.enabled

Enable chef-zero. This setting requires local_mode to be set to true. Default value: false. For example:

chef_zero.enabled true
chef_zero[:port]

The port on which chef-zero is to listen. Default value: 8889. For example:

chef_zero[:port] 8889
client_d_dir
A directory that contains additional configuration scripts to load for chef-client.
client_key

The location of the file that contains the client key. Default value: /etc/chef/client.pem. For example:

client_key '/etc/chef/client.pem'
cookbook_copyright
The name of the copyright holder. This option places a copyright notice that contains the name of the copyright holder in each of the pre-created files. If this option is not specified, a copyright name of “COMPANY_NAME” is used instead; it can easily be modified later.
cookbook_email
The email address for the individual who maintains the cookbook. This option places an email address in each of the pre-created files. If not specified, an email name of “YOUR_EMAIL” is used instead; this can easily be modified later.
cookbook_license
The type of license under which a cookbook is distributed: apachev2, gplv2, gplv3, mit, or none (default). This option places the appropriate license notice in the pre-created files: Apache v2.0 (for apachev2), GPL v2 (for gplv2), GPL v3 (for gplv3), MIT (for mit), or license 'Proprietary - All Rights Reserved (for none). Be aware of the licenses for files inside of a cookbook and be sure to follow any restrictions they describe.
cookbook_path

The sub-directory for cookbooks on the chef-client. This value can be a string or an array of file system locations, processed in the specified order. The last cookbook is considered to override local modifications. For example:

cookbook_path [
  '/var/chef/cookbooks',
  '/var/chef/site-cookbooks'
]
data_bag_encrypt_version

The minimum required version of data bag encryption. Possible values: 1 or 2. When all of the machines in an organization are running chef-client version 11.6 (or higher), it is recommended that this value be set to 2. For example:

data_bag_encrypt_version 2
fips

Allows OpenSSL to enforce FIPS-validated security during the chef-client run. Set to true to enable FIPS-validated security.

FIPS support is available in Chef client versions 12.8 and above. The following operating systems are supported:

  • Red Hat Enterprise Linux
  • Oracle Enterprise Linux
  • CentOS
  • Windows

Support for FIPS was introduced in Chef server version 12.13. The following operating systems are supported:

  • Red Hat Enterprise Linux
  • Oracle Enterprise Linux
  • CentOS
local_mode

Run the chef-client in local mode. This allows all commands that work against the Chef server to also work against the local chef-repo. For example:

local_mode true
node_name

The name of the node. This may be a username with permission to authenticate to the Chef server or it may be the name of the machine from which knife is run. For example:

node_name 'user_name'

or:

node_name 'machine_name'
no_proxy

A comma-separated list of URLs that do not need a proxy. Default value: nil. For example:

no_proxy 'localhost, 10.0.1.35, *.example.com, *.dev.example.com'
ssh_timeout
The amount of time (in seconds) to wait for an SSH connection time out.
ssl_verify_mode

Set the verify mode for HTTPS requests.

  • Use :verify_none to do no validation of SSL certificates.
  • Use :verify_peer to do validation of all SSL certificates, including the Chef server connections, S3 connections, and any HTTPS remote_file resource URLs used in the chef-client run. This is the recommended setting.

Depending on how OpenSSL is configured, the ssl_ca_path may need to be specified. Default value: :verify_peer.

syntax_check_cache_path
All files in a cookbook must contain valid Ruby syntax. Use this setting to specify the location in which knife caches information about files that have been checked for valid Ruby syntax.
tmux_split
Split the Tmux window. Default value: false.
validation_client_name

The name of the chef-validator key that is used by the chef-client to access the Chef server during the initial chef-client run. For example:

validation_client_name 'chef-validator'
validation_key

The location of the file that contains the key used when a chef-client is registered with a Chef server. A validation key is signed using the validation_client_name for authentication. Default value: /etc/chef/validation.pem. For example:

validation_key '/etc/chef/validation.pem'
verify_api_cert
Verify the SSL certificate on the Chef server. When true, the chef-client always verifies the SSL certificate. When false, the chef-client uses the value of ssl_verify_mode to determine if the SSL certificate requires verification. Default value: false.
versioned_cookbooks

Append cookbook versions to cookbooks. Set to false to hide cookbook versions: cookbooks/apache. Set to true to show cookbook versions: cookbooks/apache-1.0.0 and/or cookbooks/apache-1.0.1. When this setting is true, knife download downloads ALL cookbook versions, which can be useful if a full-fidelity backup of data on the Chef server is required. For example:

versioned_cookbooks true
config_log_level

New in ChefDK 1.2. Sets the default value of log_level in the client.rb file of the node being bootstrapped. Possible values are :debug, :info, :warn, :error and :fatal. For example:

config_log_level :debug
config_log_location

New in ChefDK 1.2. Sets the default value of log_location in the client.rb file of the node being bootstrapped. Possible values are /path/to/log_location, STDOUT, STDERR, :win_evt and :syslog. For example:

config_log_location "/path/to/log_location"   # Please make sure that the path exists

Proxy Settings

In certain situations the proxy used by the Chef server requires authentication. In this situation, three settings must be added to the configuration file. Which settings to add depends on the protocol used to access the Chef server: HTTP or HTTPS.

If the Chef server is configured to use HTTP, add the following settings:

http_proxy

The proxy server for HTTP connections. Default value: nil. For example:

http_proxy 'http://proxy.vmware.com:3128'
http_proxy_user
The user name for the proxy server when the proxy server is using an HTTP connection. Default value: nil.
http_proxy_pass
The password for the proxy server when the proxy server is using an HTTP connection. Default value: nil.

If the Chef server is configured to use HTTPS (such as the hosted Chef server), add the following settings:

https_proxy
The proxy server for HTTPS connections. (The hosted Chef server uses an HTTPS connection.) Default value: nil.
https_proxy_user
The user name for the proxy server when the proxy server is using an HTTPS connection. Default value: nil.
https_proxy_pass
The password for the proxy server when the proxy server is using an HTTPS connection. Default value: nil.

Use the following setting to specify URLs that do not need a proxy:

no_proxy
A comma-separated list of URLs that do not need a proxy. Default value: nil.

.d Directories

The chef-client supports reading multiple configuration files by putting them inside a .d configuration directory. For example: /etc/chef/client.d. All files that end in .rb in the .d directory are loaded; other non-.rb files are ignored.

.d directories may exist in any location where the client.rb, config.rb, or solo.rb files are present, such as:

  • /etc/chef/client.d
  • /etc/chef/config.d
  • ~/chef/solo.d

(There is no support for a knife.d directory; use config.d instead.)

For example, when using knife, the following configuration files would be loaded:

  • ~/.chef/config.rb
  • ~/.chef/config.d/company_settings.rb
  • ~/.chef/config.d/ec2_configuration.rb
  • ~/.chef/config.d/old_settings.rb.bak

The old_settings.rb.bak file is ignored because it’s not a configuration file. The config.rb, company_settings.rb, and ec2_configuration files are merged together as if they are a single configuration file.

Note

If multiple configuration files exists in a .d directory, ensure that the same setting has the same value in all files.

Optional Settings

In addition to the default settings in a config.rb file, there are other subcommand-specific settings that can be added:

  1. A value passed via the command-line
  2. A value contained in the config.rb file
  3. The default value

A value passed via the command line will override a value in the config.rb file; a value in a config.rb file will override a default value. Before adding any settings to the config.rb file:

  • Verify the settings by reviewing the documentation for the knife subcommands and/or knife plugins
  • Verify the use case(s) your organization has for adding them

Also note that:

  • Custom plugins can be configured to use the same settings as the core knife subcommands
  • Many of these settings are used by more than one subcommand and/or plugin
  • Some of the settings are included only because knife checks for a value in the config.rb file

To add settings to the config.rb file, use the following syntax:

knife[:setting_name] = value

where value may require quotation marks (‘ ‘) if that value is a string. For example:

knife[:ssh_port] = 22
knife[:bootstrap_template] = 'ubuntu14.04-gems'
knife[:bootstrap_version] = ''
knife[:bootstrap_proxy] = ''

Some of the optional config.rb settings are used often, such as the template file used in a bootstrap operation. The frequency of use of any option varies from organization to organization, so even though the following settings are often added to a config.rb file, they may not be the right settings to add for every organization:

knife[:bootstrap_proxy]
The proxy server for the node that is the target of a bootstrap operation.
knife[:bootstrap_template]
The path to a template file to be used during a bootstrap operation.
knife[:bootstrap_version]
The version of the chef-client to install.
knife[:editor]
The $EDITOR that is used for all interactive commands.
knife[:ssh_gateway]
The SSH tunnel or gateway that is used to run a bootstrap action on a machine that is not accessible from the workstation. Adding this setting can be helpful when a user cannot SSH directly into a host.
knife[:ssh_port]
The SSH port.

Other SSH-related settings that are sometimes helpful when added to the config.rb file:

knife[:forward_agent]
Enable SSH agent forwarding.
knife[:ssh_attribute]
The attribute used when opening an SSH connection.
knife[:ssh_password]
The SSH password. This can be used to pass the password directly on the command line. If this option is not specified (and a password is required) knife prompts for the password.
knife[:ssh_user]
The SSH user name.

Some organizations choose to have all data bags use the same secret and secret file, rather than have a unique secret and secret file for each data bag. To use the same secret and secret file for all data bags, add the following to config.rb:

knife[:secret]
The encryption key that is used for values contained within a data bag item.
knife[:secret_file]
The path to the file that contains the encryption key.

Some settings are better left to Ohai, which will get the value at the start of the chef-client run:

knife[:server_name]
Same as node_name. Recommended configuration is to allow Ohai to collect this value during each chef-client run.
node_name
See the description above for this setting.

Warning

Review the full list of optional settings that can be added to the config.rb file. Many of these optional settings should not be added to the config.rb file. The reasons for not adding them can vary. For example, using --yes as a default in the config.rb file will cause knife to always assume that “Y” is the response to any prompt, which may lead to undesirable outcomes. Other settings, such as --hide-healthy (used only with the knife status subcommand) or --bare-directories (used only with the knife list subcommand) probably aren’t used often enough (and in the same exact way) to justify adding them to the config.rb file. In general, if the optional settings are not listed on the main config.rb topic, then add settings only after careful consideration. Do not use optional settings in a production environment until after the setting’s performance has been validated in a safe testing environment.